flipsx3
02-28-2013, 02:35 PM
Engine
k24a8 stock pistons and rods and headgaket
vtec killer rocker arms k20a2 cams
Rbc and k20a2 throttle body
ebay 44mm waste gate
ebay obx sidewinder manifold
ebay gt4202
k-pro
Ep3 5 speed quaife diff
506whp at 9.5 psi pump gas 93 octane 7800rpm redline
I am not easy on this car. I go threw tires like others go threw motors reliability is all in the tune. Daily driven to work 50000 miles on this setup. Most of its nightly duties are roll races against local American cars lol.
Been driving this setup for 5 plus year amazingly reliable and was tuned by me. If anyone would like me to look over there tune i will do so for free. I have tuned over 500 kseries setups in the last 7 years. Majority of tune work i have seen work well full throttle is close and part throttle is terrible. Cars tuned on the dyno dont work well on the street due to wind resistance and wheel spin. What i mean by this is when on a dyno there is no wind and ur strapped down also most of the time the hood is open. Then driving on the street and going at speed the car is pushing threw the wind hood closed. Roll down the window at 100mph and stick ur hand out feel that resistance imagine the entire front of ur car. The best tunes are done threw datalogs they represent what is happening in the engine while actually driving. I have tuned for autocross teams, drag cars, and street racers, i use the dyno to get close but final tunes are always done using datalogs from the track or street. Sick of tuners getting close and ripping people off. So if u want me to double check any of your tunes i will for free time to let some golden info out there for the k pro community i have been on k20a.org for a very long time doing this same thing never had a user unhappy always made improvements that they were happy with 100 percent of the time. I always go the extra mile just the way i do it. :wow::yay:
https://www.youtube.com/watch?v=8sw6Aplqrvg
https://www.youtube.com/watch?v=_XdC8yXBj5o
https://www.youtube.com/watch?v=y1DLHma4RUw
https://www.youtube.com/watch?v=bR4P75Ueh-Y
k24a8 stock pistons and rods and headgaket
vtec killer rocker arms k20a2 cams
Rbc and k20a2 throttle body
ebay 44mm waste gate
ebay obx sidewinder manifold
ebay gt4202
k-pro
Ep3 5 speed quaife diff
506whp at 9.5 psi pump gas 93 octane 7800rpm redline
I am not easy on this car. I go threw tires like others go threw motors reliability is all in the tune. Daily driven to work 50000 miles on this setup. Most of its nightly duties are roll races against local American cars lol.
Been driving this setup for 5 plus year amazingly reliable and was tuned by me. If anyone would like me to look over there tune i will do so for free. I have tuned over 500 kseries setups in the last 7 years. Majority of tune work i have seen work well full throttle is close and part throttle is terrible. Cars tuned on the dyno dont work well on the street due to wind resistance and wheel spin. What i mean by this is when on a dyno there is no wind and ur strapped down also most of the time the hood is open. Then driving on the street and going at speed the car is pushing threw the wind hood closed. Roll down the window at 100mph and stick ur hand out feel that resistance imagine the entire front of ur car. The best tunes are done threw datalogs they represent what is happening in the engine while actually driving. I have tuned for autocross teams, drag cars, and street racers, i use the dyno to get close but final tunes are always done using datalogs from the track or street. Sick of tuners getting close and ripping people off. So if u want me to double check any of your tunes i will for free time to let some golden info out there for the k pro community i have been on k20a.org for a very long time doing this same thing never had a user unhappy always made improvements that they were happy with 100 percent of the time. I always go the extra mile just the way i do it. :wow::yay:
https://www.youtube.com/watch?v=8sw6Aplqrvg
https://www.youtube.com/watch?v=_XdC8yXBj5o
https://www.youtube.com/watch?v=y1DLHma4RUw
https://www.youtube.com/watch?v=bR4P75Ueh-Y