View Full Version : LGIndustries 67mm Street/Strip - Build
dkpr87
02-20-2013, 12:31 AM
Short and Sweet - Bad Ass Street Monster
The Setup:
1992 Honda Civic Si Hatchback
Head
K24A1 Head
SuperTech Valvetrain
K20Z1 Cams
Shortblock
K24A1 Block
CP Pistons
Eagle Rods
Induction/Fuel
Magnus K Series DRAG Intake Manifold
K-Tuned 90mm Throttle Body
Custom Intercooler Piping
3" Side Feed Intercooler
Full Blown Dual Pump Hangers
Dual DW300 Fuel Pumps
F.I.C. 2150s
Turbo Setup ***OLD SETUP***
PLM K Series Sidewinder Manifold
PTE 46mm Wastegate
PTE 6766 CEA
Turbo Setup ***NEW SETUP***
TE K Series T4 Sidewinder Manifold
Twin PTE 46mm Wastegates
BorgWarner S366
Drivetrain
EP3 Transmission
Quafie LSD
Competition Twin Disc Clutch
DSS Level 5.9 Axles
Brains
Hondata K-Pro Ver III
Exterior
CCC-Racing Wing
Exospeed 3pc Front End
LGIndustries SFWD Civic - First Pass - YouTube (https://youtu.be/jdozw3TRI-s)
http://i143.photobucket.com/albums/r135/ArmyDude87/1468770_300589140098029_2820040217319789957_n_zpsb e81511f.jpg
monjarassi
02-20-2013, 12:59 AM
lovely setup , seen your build on k20a welcome!!!
boosted_teg
02-20-2013, 01:54 AM
Welcome, ive also been following this on k20a. What kind of power are you expecting?
Magnus manifold looks awesome
dkpr87
02-20-2013, 01:59 AM
Approx** 600hp E85 Street Tune
Approx** 750hp Q16 Race Tune
PetefromtheStreets
02-20-2013, 04:03 PM
Welcome to :boostedk20: and nice setup you've got going on there. In for more.
BoostedK20
02-21-2013, 12:40 PM
Looking forward to more of this build! :welcome: to :boostedk20:
ksboi
02-23-2013, 04:58 AM
I went to humbles shop when I lived in Ks back in 1999 great bunch of guys.
dkpr87
02-24-2013, 12:46 AM
Thanks a lot guys!!!! we have a lot of fab work ahead but hopefully things will go smoothly!!
Look what came in from Chris Miller Racing!! :-)
https://fbcdn-sphotos-h-a.akamaihd.net/hphotos-ak-frc1/v/803251_10151416196504039_963968039_n.jpg?oh=1e367c 8f67373e285dacad7a0de5b98f&oe=512BB1B9&__gda__=1361850777_02f99ee1032e4f4759b6b613e944d92 4
Sexy 46mm Gate ;-)
boosted_teg
02-24-2013, 06:22 PM
Looks good. I might be picking up a precision gate also. There are more and more guys buying them.
Is the openings 46mm or is it 44mm-> 46mm
dkpr87
02-24-2013, 08:16 PM
Looks good. I might be picking up a precision gate also. There are more and more guys buying them.
Is the openings 46mm or is it 44mm-> 46mm
It's 44mm -> 46mm
:-)
Spoolin_VTEC
02-25-2013, 12:43 AM
It's a 46mm that fits with 44mm flanges. Dopeness. Lots of locals run then, great gate. AND the nut/bolt for the vband clamp has a recess for the bolt, so you don't need to use two wrenches when tightening or loosening. Not a big deal for you, Mr. HugePurpleEngineBay. But it's a great feature. Appreciate it. Appreciate!
:)
dkpr87
02-25-2013, 02:01 AM
It's a 46mm that fits with 44mm flanges. Dopeness. Lots of locals run then, great gate. AND the nut/bolt for the vband clamp has a recess for the bolt, so you don't need to use two wrenches when tightening or loosening. Not a big deal for you, Mr. HugePurpleEngineBay. But it's a great feature. Appreciate it. Appreciate!
:)
Tial has gotten pricey recently and it's funny how Precision, possibly the biggest seller of Turbos, can sell a slightly bigger product for much less. :-)
PetefromtheStreets
02-25-2013, 10:39 AM
Tial has gotten pricey recently and it's funny how Precision, possibly the biggest seller of Turbos, can sell a slightly bigger product for much less. :-)
I also like the fact that they include a variety of springs and directions on how to pair them together to reach a target gate pressure.
boosted_teg
02-25-2013, 12:24 PM
the nut being recessed into the flange would sell for me. Do i ever hate having to use 2 wrenches in a tight spot
dkpr87
03-10-2013, 11:15 PM
I never thought finding a fab guy would be as hard as it's been LOL it's Tulsa OK, you can throw a rock and hit a welder :-/
one of my friends has a lead on two fab guys so maybe in a a week or so i can get some progress pics up :-)
PetefromtheStreets
03-10-2013, 11:31 PM
Best of luck man. I wish I could weld, I'd love to put in work on a race car.
dkpr87
03-11-2013, 01:25 AM
Best of luck man. I wish I could weld, I'd love to put in work on a race car.
Hopefully i'll know tomorrow whether or not i got a fab guy or not, worst comes to worst i got a friend that can do it, but we'll see
dkpr87
03-12-2013, 01:43 AM
GOT A FAB GUY LINED UP!!!!!!!!!!
Sending the car out soon!!!
dkpr87
04-04-2013, 01:21 AM
https://sphotos-a.xx.fbcdn.net/hphotos-ash3/579785_546749162032595_1375884406_n.jpg
Dropped the car off at the fabricator, it's gonna look siiiiiiiiiiick once it's done :-)
dkpr87
04-27-2013, 11:59 PM
https://fbcdn-sphotos-h-a.akamaihd.net/hphotos-ak-frc1/v/911462_10151523573674039_553910594_n.jpg?oh=5d4a95 9b4c5cc337b0ac149b7633eea2&oe=517DBA27&__gda__=1367295239_ae3f219c8084c4f2c24955ca6033645 d
https://sphotos-b.xx.fbcdn.net/hphotos-frc3/459943_556262037747974_1279025569_o.jpg
https://sphotos-b.xx.fbcdn.net/hphotos-ash3/919173_556262064414638_593348154_o.jpg
Si Speed 317
04-28-2013, 12:39 AM
https://fbcdn-sphotos-h-a.akamaihd.net/hphotos-ak-frc1/v/911462_10151523573674039_553910594_n.jpg?oh=5d4a95 9b4c5cc337b0ac149b7633eea2&oe=517DBA27&__gda__=1367295239_ae3f219c8084c4f2c24955ca6033645 d
https://sphotos-b.xx.fbcdn.net/hphotos-frc3/459943_556262037747974_1279025569_o.jpg
https://sphotos-b.xx.fbcdn.net/hphotos-ash3/919173_556262064414638_593348154_o.jpg
Looks great! Details? Who ended up doing your fab work?
Could swear I posted in your thread... man I'm doing that a lot lately. I need a secretary. And I hope she likes dragons... ;)
dkpr87
04-28-2013, 05:12 PM
Looks great! Details? Who ended up doing your fab work?
Could swear I posted in your thread... man I'm doing that a lot lately. I need a secretary. And I hope she likes dragons... ;)
Well so far our goal is to be able to make this car as effective on the track as it can be on the street, we're going to leave the power at 600hp while we're testing it out
LOL that's happened to me too!
1SLOWFG2
04-28-2013, 05:37 PM
Looking good man!
dkpr87
05-01-2013, 09:18 AM
https://fbcdn-sphotos-h-a.akamaihd.net/hphotos-ak-prn1/v/938856_10151529180039039_1138042987_o.jpg?oh=d5743 6b45789ca6d5cd8fbbbd20a381c&oe=518327A1&__gda__=1367539593_8e592da1aeeea147b1303c57d6bbde5 5
Thanks to John @ K-Tuned for getting us setup with the Pro-1000 Fuel Rail for our K Series SFWD Car!!!
PetefromtheStreets
05-01-2013, 01:36 PM
. I need a secretary. And i hope she likes dragons... ;)
lmfaoooo.
Si Speed 317
05-04-2013, 02:28 PM
https://fbcdn-sphotos-h-a.akamaihd.net/hphotos-ak-prn1/v/938856_10151529180039039_1138042987_o.jpg?oh=d5743 6b45789ca6d5cd8fbbbd20a381c&oe=518327A1&__gda__=1367539593_8e592da1aeeea147b1303c57d6bbde5 5
Thanks to John @K-Tuned for getting us setup with the Pro-1000 Fuel Rail for our K Series SFWD Car!!!
John's a great guy, very good customer service
lmfaoooo.
Lmao ;) I was hoping someone would appreciate it
dkpr87
05-07-2013, 01:52 AM
https://fbcdn-sphotos-d-a.akamaihd.net/hphotos-ak-ash4/295360_560389594001885_2139006403_n.jpg
Nothing against the 75mm BBK Mustang Throttle Body buuuuut.....
Why play guess with sensors and pigtails with a smaller TB when you can have a bigger one that's plug and play ;-)
90mm Skunk2 Racing Throttle Body
Honda Sensors Plug and Play :-)
Thanks Alex Pagan from Humble Performance for the hook up :-)
Si Speed 317
05-07-2013, 02:52 AM
https://fbcdn-sphotos-d-a.akamaihd.net/hphotos-ak-ash4/295360_560389594001885_2139006403_n.jpg
Nothing against the 75mm BBK Mustang Throttle Body buuuuut.....
Why play guess with sensors and pigtails with a smaller TB when you can have a bigger one that's plug and play ;-)
90mm Skunk2 Racing Throttle Body
Honda Sensors Plug and Play :-)
Thanks Alex Pagan from Humble Performance for the hook up :-)
I didn't know there was an upgrade to a mustang TB! 90mm skunk2 is hard to beat though. Looks dope, post an install/installed review!
dkpr87
05-22-2013, 12:10 AM
http://i143.photobucket.com/albums/r135/ArmyDude87/K-Build/980489_10151562630039039_1818088817_o_zpsb79c78c0. jpg
piping almost done
dkpr87
05-30-2013, 12:41 AM
got her back to Humble Performance (http://www.humbleperformance.com) from the fabricator, and wheeled her out for some air
http://i143.photobucket.com/albums/r135/ArmyDude87/965071_10151576424884039_69949749_o_zpsfed64580.jp g
Si Speed 317
06-09-2013, 07:23 AM
Looks great, huge charge piping :drool: Hows that throttle body?
dkpr87
07-12-2013, 12:03 AM
i was running a 75mm BBK and now i'm running a 90mm Skunk2 TB
the charge pipe is 3.5"
PetefromtheStreets
07-12-2013, 12:27 AM
Had the car been tuned or made any passes yet?
s4 IG-petefromthestreets
i was running a 75mm BBK and now i'm running a 90mm Skunk2 TB
the charge pipe is 3.5"
:bricks:
How big is your uppipe :giggle: (downpipe)
dkpr87
07-12-2013, 12:32 PM
:bricks:
How big is your uppipe :giggle: (downpipe)
"Downpipe" is 3" I'm thinking of getting a cheap 3"-4" Megaphone or Transition and putting the WG pipe shorter and come out straight up from where it is right now
dkpr87
07-12-2013, 12:36 PM
Had the car been tuned or made any passes yet?
s4 IG-petefromthestreets
We're waiting for some last minute parts and hopefully get tuned by August or September
dkpr87
07-23-2013, 02:05 AM
https://fbcdn-sphotos-h-a.akamaihd.net/hphotos-ak-prn1/1012228_595511807156330_751308290_n.jpg
K-Tuned Pro 1000 Rail Installed
Si Speed 317
07-31-2013, 12:52 AM
https://fbcdn-sphotos-h-a.akamaihd.net/hphotos-ak-prn1/1012228_595511807156330_751308290_n.jpg
K-Tuned Pro 1000 Rail Installed
I love this rail, it's HUGE! Ben@K-Tuned.com makes such great products
dkpr87
09-15-2013, 12:43 AM
Sooooooo here's a small update for you guys.
Our new Full Blown Dual Pump Hanger arrived yesterday :-) and we're making some slight modifications to the parts list.
- Switching out the DW300 Pumps in favor of the new E-Compatible Walbro 485s
- Getting an Exospeed 3pc Front End.
- Sold my 13x8 Slicks, and getting new ones soon.
https://sphotos-a-dfw.xx.fbcdn.net/hphotos-prn2/1174697_621141717926672_974541802_n.jpg
More Pics coming soon
BoostedK20
09-15-2013, 03:17 AM
Sooooooo here's a small update for you guys.
Our new Full Blown Dual Pump Hanger arrived yesterday :-) and we're making some slight modifications to the parts list.
- Switching out the DW300 Pumps in favor of the new E-Compatible Walbro 485s
- Getting an Exospeed 3pc Front End.
- Sold my 13x8 Slicks, and getting new ones soon.
https://sphotos-a-dfw.xx.fbcdn.net/hphotos-prn2/1174697_621141717926672_974541802_n.jpg
More Pics coming soon
That's great! Side note: I believe Si's are stuck with the only option being the SRT CNC Dual Pump hanger/cage, no?
dkpr87
09-15-2013, 11:06 PM
That's great! Side note: I believe Si's are stuck with the only option being the SRT CNC Dual Pump hanger/cage, no?
I wouldn't know about the new Si's but i have heard of them using the SRT CNC Dual Pump setup, most of the cars at Humble that use dual pump setups or crazy Fuel systems are 91-99 models the newer model clients havent wanted to go "fast" yet LOL
Si Speed 317
09-23-2013, 11:05 PM
I wouldn't know about the new Si's but i have heard of them using the SRT CNC Dual Pump setup, most of the cars at Humble that use dual pump setups or crazy Fuel systems are 91-99 models the newer model clients havent wanted to go "fast" yet LOL
Thats awesome. Post some pics if you can, that interests me lol
1BadK
09-29-2013, 04:37 PM
Is that a PLM turbo manifold?
dkpr87
09-30-2013, 12:00 AM
Thats awesome. Post some pics if you can, that interests me lol
Will Do!!!!
Is that a PLM turbo manifold?
Yessir!
dkpr87
10-14-2013, 11:22 PM
https://scontent-b-dfw.xx.fbcdn.net/hphotos-prn2/1393865_638836206157223_590022809_n.jpg
Sorry for the crappy Instagram Pic***
Harness and FIC 2150s installed, next Fuel Lines, Dual Pump Kit, and intercooler piping goes back on!
monjarassi
10-14-2013, 11:24 PM
What tb is that??
PetefromtheStreets
10-14-2013, 11:41 PM
What tb is that??
Looks like a S2
s4 IG-petefromthestreets now Free ('http://tapatalk.com/m?id=10')
monjarassi
10-14-2013, 11:42 PM
Yea thought so but was confused with the bdl
Si Speed 317
10-15-2013, 12:43 AM
https://scontent-b-dfw.xx.fbcdn.net/hphotos-prn2/1393865_638836206157223_590022809_n.jpg
Sorry for the crappy Instagram Pic***
Harness and FIC 2150s installed, next Fuel Lines, Dual Pump Kit, and intercooler piping goes back on!
Awesome! That rail will definitely hold all that fuel without trouble!
Moar pics
dkpr87
10-15-2013, 01:04 AM
What tb is that??
Skunk2 90mm ;-)
Awesome! That rail will definitely hold all that fuel without trouble!
Moar pics
Oh yea!! -10 AN on both ends with a -10 line feeding and a -8 return line :-)
We're shooting for some 700s so hopefully with all this we'll get there!!!
Si Speed 317
10-15-2013, 12:37 PM
Holy shit. -10 feeds and an -8an return. Damn!! Are those two separate -10 lines all the way from the tank? Meaning 1 from each pump?
monjarassi
10-15-2013, 01:18 PM
:drooling:
dkpr87
10-15-2013, 11:59 PM
Holy shit. -10 feeds and an -8an return. Damn!! Are those two separate -10 lines all the way from the tank? Meaning 1 from each pump?
the way it works is the -10 feed line pulls from both pumps at the same time and then it return fuel on the -8 no dual lines required :yay:
:drooling:
:biggrin:
boosted_teg
10-16-2013, 12:36 AM
Did you already get your exospeed 3 piece front for the car? Ive been hearing a lot that exospeed is no longer making the fronts, but CMR is making a similar?
dkpr87
10-16-2013, 01:04 AM
Did you already get your exospeed 3 piece front for the car? Ive been hearing a lot that exospeed is no longer making the fronts, but CMR is making a similar?
Not yet, waiting on my friend to bring it by so i can mock it up
SOOOOO ANXIOUS TO SEE IT ON TOO!!!:FUU:
dkpr87
10-16-2013, 04:12 PM
Had to tap and weld a small fitting to my Magnus for vacuum.... It didn't come with one.... Da fuq...
On a different note, I may be selling my Magnus over the winter and getting a Skunk2 Ultra Series to replace it
Sent from my SAMSUNG-SGH-I717 using Tapatalk
monjarassi
10-16-2013, 04:31 PM
Had to tap and weld a small fitting to my Magnus for vacuum.... It didn't come with one.... Da fuq...
On a different note, I may be selling my Magnus over the winter and getting a Skunk2 Ultra Series to replace it
Sent from my SAMSUNG-SGH-I717 using Tapatalk
S2....... why??
PetefromtheStreets
10-16-2013, 04:44 PM
S2....... why??
The s2 ultra is a Kinsler copy. Evidently is out preforming everything else out there
s4 IG-petefromthestreets
dkpr87
10-16-2013, 04:47 PM
I like it's design and I've been wanting that one for a minute, but with Ks the manifolds that are proven are the Gato's, GE's, Prayontoo and Magnus so I might step it up to a Gato Center Feed or a Prayontoo Center Feed
Sent from my SAMSUNG-SGH-I717 using Tapatalk
dkpr87
10-16-2013, 04:48 PM
The s2 ultra is a Kinsler copy. Evidently is out preforming everything else out there
s4 IG-petefromthestreets
Yea I kinda noticed that LOL it does look a lot like a Kinsler
Sent from my SAMSUNG-SGH-I717 using Tapatalk
PetefromtheStreets
10-16-2013, 04:50 PM
I like it's design and I've been wanting that one for a minute, but with Ks the manifolds that are proven are the Gato's, GE's, Prayontoo and Magnus so I might step it up to a Gato Center Feed or a Prayontoo Center Feed
Sent from my SAMSUNG-SGH-I717 using Tapatalk
Yea I've seen speedfactory runs a s2 ultra on their 7sec civic. That in itself tells the tale. But k's seem to really love the center feeds like you said. Prayoonto has been on a rise since they released theirs
s4 IG-petefromthestreets
dkpr87
10-16-2013, 05:03 PM
Yea I've seen speedfactory runs a s2 ultra on their 7sec civic. That in itself tells the tale. But k's seem to really love the center feeds like you said. Prayoonto has been on a rise since they released theirs
s4 IG-petefromthestreets
Yea I think since the K flows so well the center feed is the best choice, so probably one of three options and a 4th as a wild card.
-Prayontoo
-Gato
-AFI
-Magnus (They're developing a center feed for Ks)
Sent from my SAMSUNG-SGH-I717 using Tapatalk
monjarassi
10-16-2013, 05:07 PM
Yes those center feeds are just so much sexyer and functional
PetefromtheStreets
10-16-2013, 05:09 PM
Yea I think since the K flows so well the center feed is the best choice, so probably one of three options and a 4th as a wild card.
-Prayontoo
-Gato
-AFI
-Magnus (They're developing a center feed for Ks)
Sent from my SAMSUNG-SGH-I717 using Tapatalk
That's a good list to go off of
s4 IG-petefromthestreets
dkpr87
10-16-2013, 05:33 PM
Yes those center feeds are just so much sexyer and functional
Hell yeeeea they are ;-)
That's a good list to go off of
s4 IG-petefromthestreets
Yea I figured it would be a good one to go off of, best ones out there
Sent from my SAMSUNG-SGH-I717 using Tapatalk
dkpr87
10-22-2013, 08:54 PM
Well I sat down in front of the car today and compiled a list of what I need to buy and what I need to install on it.
List to finish the Hatchback
Complete K20 Thermostat Housing
K20 Crank Sensor
Turbo Nuts & Bolts
B Series TPS
Vacuum Block
Vacuum Lines and Fittings
Install Fuel System
Relays for the Fuel Pumps
T3 Turbo Gasket
Install Hondata Boost Solenoid
Stock Hood
Install 3pc Front End
-___- I swear it's like it never ends LOL
PetefromtheStreets
10-22-2013, 08:55 PM
Well I sat down in front of the car today and compiled a list of what I need to buy and what I need to install on it.
List to finish the Hatchback
Complete K20 Thermostat Housing
K20 Crank Sensor
Turbo Nuts & Bolts
B Series TPS
Vacuum Block
Vacuum Lines and Fittings
Install Fuel System
Relays for the Fuel Pumps
T3 Turbo Gasket
Install Hondata Boost Solenoid
Stock Hood
Install 3pc Front End
-___- I swear it's like it never ends LOL
May I ask why you need to install a B series tips?
s4 IG-petefromthestreets
Cage plus radio member #1
dkpr87
10-22-2013, 09:06 PM
With the Skunk2 90mm you can use either or
PetefromtheStreets
10-22-2013, 09:17 PM
With the Skunk2 90mm you can use either or
Gotcha that was going to be my next statement. Marty with the Kraftwerks ek made a short clip of the Ktuned billet TPS on the skunk2 90 mm tb.
s4 IG-petefromthestreets
Cage plus radio member #1
dkpr87
10-22-2013, 09:40 PM
Yea I saw that, I'm gonna go with that whenever I swap out the harness over the winter
PetefromtheStreets
10-22-2013, 10:20 PM
Yea I saw that, I'm gonna go with that whenever I swap out the harness over the winter
Nice man. Car is coming along nicely. :thumb:
s4 IG-petefromthestreets
Cage plus radio member #1
dkpr87
10-22-2013, 10:26 PM
Nice man. Car is coming along nicely. :thumb:
s4 IG-petefromthestreets
Cage plus radio member #1
Thanks man!!! Hope to finish it soon!!!
dkpr87
10-27-2013, 04:34 AM
Well took the Intercooler, Piping, Intake Manifold, Valve Cover, and Turbo Compressor Cover to do some painting :-)
VC and Intake Manifold will be Wrinkle Black and the rest will be Flat Black
Pics coming soon, hopefully i don't f**k it up LOL
BoostedK20
10-27-2013, 09:55 AM
Well took the Intercooler, Piping, Intake Manifold, Valve Cover, and Turbo Compressor Cover to do some painting :-)
VC and Intake Manifold will be Wrinkle Black and the rest will be Flat Black
Pics coming soon, hopefully i don't f**k it up LOL
We all know that feeling very well! VHT Wrinkle Black?
biocrx
10-27-2013, 11:51 AM
the hatch is looking great, cant wait to boost my setup. such a inspiration.
dkpr87
10-27-2013, 06:41 PM
We all know that feeling very well! VHT Wrinkle Black?
Haven't quite picked out the wrinkle black I want to use yet, any pointers lol?
dkpr87
10-28-2013, 12:15 AM
the hatch is looking great, cant wait to boost my setup. such a inspiration.
Thanks man!!!! This build has become quite the headache but it'll pay off in the end, hopefully once it's done i'll go and do a nice photoshoot and post it up along with a dyno video and track footage :-)
Si Speed 317
10-28-2013, 12:41 PM
Haven't quite picked out the wrinkle black I want to use yet, any pointers lol?
Well, I do! VHT wrinkle black works very well. Make sure the parts you're coating are metal. Follow the directions on the can. 1st coat: heavy; horizontally sprayed. 2nd coat: heavy; vertically sprayed. 3rd and final coat: heavy; diagonally. Then, immediately put in the oven for 20 minutes at 200*f. Then let cure somewhere not the inside of your home, itll take 48 hours to properly cure. Now you know my secret. ;)
PetefromtheStreets
10-28-2013, 01:01 PM
Well, I do! VHT wrinkle black works very well. Make sure the parts you're coating are metal. Follow the directions on the can. 1st coat: heavy; horizontally sprayed. 2nd coat: heavy; vertically sprayed. 3rd and final coat: heavy; diagonally. Then, immediately put in the oven for 20 minutes at 200*f. Then let cure somewhere not the inside of your home, itll take 48 hours to properly cure. Now you know my secret. ;)
Every time I used it it didn't look good. Because I didn't bake it
s4 IG-petefromthestreets
Cage plus radio member #1
You could get all those pieces powder coated as well. A little more money but holds up way better than paint.
dkpr87
10-28-2013, 11:25 PM
You could get all those pieces powder coated as well. A little more money but holds up way better than paint.
True :-)
dkpr87
11-05-2013, 09:03 PM
https://scontent-b-ord.xx.fbcdn.net/hphotos-prn2/1459202_653264451381065_1167506610_n.jpg
Finally got my 3pc in!
monjarassi
11-05-2013, 09:06 PM
Drooollll........
PetefromtheStreets
11-06-2013, 12:07 PM
https://scontent-b-ord.xx.fbcdn.net/hphotos-prn2/1459202_653264451381065_1167506610_n.jpg
Finally got my 3pc in!
I'm friends with you on fb I take it because I saw that exact same pic yesterday! Highfive. :thumb:
s4 IG-petefromthestreets
Cage plus radio member #1
dkpr87
11-06-2013, 12:20 PM
I'm friends with you on fb I take it because I saw that exact same pic yesterday! Highfive. :thumb:
s4 IG-petefromthestreets
Cage plus radio member #1
LOL Who is you!? This is creeeeepy hahahaha
PetefromtheStreets
11-06-2013, 12:20 PM
LOL Who is you!? This is creeeeepy hahahaha
Pete Streets LOL creepin
s4 IG-petefromthestreets
Cage plus radio member #1
dkpr87
11-07-2013, 12:04 AM
Pete Streets LOL creepin
s4 IG-petefromthestreets
Cage plus radio member #1
LOL!!!!
Well i painted the piping and now i'm going to take the VC, Compressor Cover, and Intake Mani over to get powder coated wrinkle black :-)
https://scontent-a-ord.xx.fbcdn.net/hphotos-frc3/1452007_653887751318735_1565945400_n.jpg
dkpr87
01-10-2014, 04:07 PM
Back from the dead LOL
A lot of miscellaneous stuff got done here in the last month, wiring, fuel, belts, etc... Hopefully starting her up soon. Will post a video when it happens!
monjarassi
01-10-2014, 05:02 PM
We'll be waiting don't forget bout us...
PetefromtheStreets
01-10-2014, 05:03 PM
^^What he said!!^^
s4 IG-petefromthestreets
Cage plus radio member #1
dkpr87
01-10-2014, 06:52 PM
Dude I'm trying lol Full Time Job and School starting up is killin me hahahaha
Si Speed 317
01-15-2014, 10:28 AM
Back from the dead LOL
A lot of miscellaneous stuff got done here in the last month, wiring, fuel, belts, etc... Hopefully starting her up soon. Will post a video when it happens!
Welcome back, sir zombie! Keep us updated with pictures! MajorWeak knows we love our pictures. ;)
dkpr87
01-15-2014, 10:47 AM
I was messing with the car last night and started a list of things I need to get worked out, aside from the list my mechanic has to get it running.
-Get the interior done
-Touch up the engine bay
-Cut the hole in the hood
-Cut the exhaust and dump pipes to fit
I'll be making a subtle change to the Turbo, I found someone who has an H Cover for a 67mm and I neeeeeeds it LOL
Spoolin_VTEC
01-15-2014, 01:56 PM
I was messing with the car last night and started a list of things I need to get worked out, aside from the list my mechanic has to get it running.
-Get the interior done
-Touch up the engine bay
-Cut the hole in the hood
-Cut the exhaust and dump pipes to fit
I'll be making a subtle change to the Turbo, I found someone who has an H Cover for a 67mm and I neeeeeeds it LOL
Nice list! What interior mods are you doing? I like the hood exit idea too :thumb: Maybe add a BoostedK20.com windshield banner?
dkpr87
01-15-2014, 02:05 PM
Nice list! What interior mods are you doing? I like the hood exit idea too :thumb: Maybe add a BoostedK20.com windshield banner?
Clean her up, stock seats for now, stage brake, trim on the doors, center console, etc
Send me one and I'll happily rock it ;-)
dkpr87
01-22-2014, 12:35 AM
http://i143.photobucket.com/albums/r135/ArmyDude87/1535395_10152064318324039_1803933232_n_zps9a0440b2 .jpg
Some more updates :-)
Si Speed 317
01-22-2014, 09:59 AM
Nice!!! Thought it was KMOD at first
dkpr87
01-22-2014, 10:52 AM
Yea man, I'm trying to see what I could do to make the car look different, but most SFWD Turbo Ks do start to look a lot alike. I really do like his build too! LOL
Si Speed 317
01-23-2014, 09:10 AM
Have you ever thought of doing a strut brace? BoostedK20.com decal on the charge piping from the turbo? Reservoir socks/wristbands? Just a few ideas. The FPR pointing to the sky is awesome, car must be super low!!
Si Speed 317
01-23-2014, 09:11 AM
Have you ever thought of doing a strut brace? BoostedK20.com decal on the charge piping from the turbo? Reservoir socks/wristbands? Just a few ideas. The FPR pointing to the sky is awesome, car must be super low!!
And PM BoostedK20 about the banner/decal
dkpr87
01-23-2014, 09:33 AM
Have you ever thought of doing a strut brace? BoostedK20.com decal on the charge piping from the turbo? Reservoir socks/wristbands? Just a few ideas. The FPR pointing to the sky is awesome, car must be super low!!
Not doing a strut price since the exhaust up pipe will be going up through where the bars would be.
I was thinking to put the BoostedK20.com decal above my La Gallina Industries banner on my windshield.
I hadn't really thought of the socks.
I'm going to order the center mount for the FPR guage since it won't clear as it sits right now.
The car isn't THAT low, but once I get the slicks on it, we'll see how low she sits ;-)
And PM BoostedK20 about the banner/decal
Will do!!!
Si Speed 317
01-23-2014, 09:36 AM
Not doing a strut price since the exhaust up pipe will be going up through where the bars would be.
I was thinking to put the BoostedK20.com decal above my La Gallina Industries banner on my windshield.
I hadn't really thought of the socks.
I'm going to order the center mount for the FPR guage since it won't clear as it sits right now.
The car isn't THAT low, but once I get the slicks on it, we'll see how low she sits ;-)
Will do!!!
Ah, the exhaust will look sick though! Any specific design/style you're going for? And yea that would look good, it's big though. Would be a great spot! Socks aren't a bad idea, or Wilwood or other reservoirs, but sucks are much cheaper lmao. And the center mount for the rail? Or same spot but center mounted?
She's gonna look sick on slicks! I want a set of Weldon skinnies n slicks :drooling:
dkpr87
01-23-2014, 09:51 AM
Ah, the exhaust will look sick though! Any specific design/style you're going for? And yea that would look good, it's big though. Would be a great spot! Socks aren't a bad idea, or Wilwood or other reservoirs, but sucks are much cheaper lmao. And the center mount for the rail? Or same spot but center mounted?
She's gonna look sick on slicks! I want a set of Weldon skinnies n slicks :drooling:
No particular style, just the best route from the turbo and then up.
I had given the Wilwood Kit some thought but not yet.
The center rail mount is for the guage only, K-Tuned sells the mount, it's like $50.
I can't wait to see her on some slicks and skinnies man!!! Hopefully IFO Noble OK we'll get to see her do her thing LOL
Si Speed 317
01-23-2014, 10:01 AM
No particular style, just the best route from the turbo and then up.
I had given the Wilwood Kit some thought but not yet.
The center rail mount is for the guage only, K-Tuned sells the mount, it's like $50.
I can't wait to see her on some slicks and skinnies man!!! Hopefully IFO Noble OK we'll get to see her do her thing LOL
Best route from turbo up sounds good to me! Yea, socks for sure then. Haha! And ok, you'll also need a plug for your FPR. Just as a heads up (I'm sure you knew that). She's gonna look mean man!! Lmao one way to find out
dkpr87
01-23-2014, 12:19 PM
Best route fron turbo uo siunds good to me! Yea, socks for sure then. Haha! And ok, you'll also need a plug for your FPR. Just as a heads up (I'm sure you knew that). She's gonna look mean man!! Lmao one way to find out
Yea as soon as I get the fitting for the FP Guage I'll be getting the plug fitting.
I'll be doing a small photo shoot once she's done ;-)
Possibly a video too
Si Speed 317
01-23-2014, 04:27 PM
Yea as soon as I get the fitting for the FP Guage I'll be getting the plug fitting.
I'll be doing a small photo shoot once she's done ;-)
Possibly a video too
Holy typo batman, I butchered my last post! Fixed. And nice, just made sure it's the right type of plug (usually with O-ring). Look forward to the pics and possible video!!
PetefromtheStreets
01-23-2014, 04:29 PM
Holy typo batman, I butchered my last post! Fixed. And nice, just made sure it's the right type of plug (usually with O-ring). Look forward to the pics and possible video!!
To seal off the gauge on a fpr its usually a npt fitting not a straight cut
s4 IG-petefromthestreets
Cage plus radio member #1
dkpr87
03-09-2014, 11:08 PM
Well guys... I've hit a small road block, but it'll be corrected soon.
Getting these two parts along with some -16 fittings and weld on bungs for the radiator and it should make it all better LOL
http://k-tuned.3dcartstores.com/Upper-Coolant-Housing-w-Hose-fitting-K20_p_96.html
http://k-tuned.3dcartstores.com/Swivel-Neck-Thermostat-K20-K24_p_154.html
Then later on when i go to the DP Race Radiator, i'll have everything set :-)
BoostedK20
03-10-2014, 12:51 AM
Are you overheating?!
dkpr87
03-10-2014, 12:55 AM
Are you overheating?!
Car hasn't even ran yet, but we've ran into issues with radiator hoses to for in that area so I'm just going to set it up for possible expansion later on.
I really want that Magnus manifold but I didn't see the k24 head option
dkpr87
03-10-2014, 11:33 AM
I really want that Magnus manifold but I didn't see the k24 head option
Mine is on a K24 Head
So it has the coolant port built onto the head? Or are you using an adapter?
dkpr87
03-10-2014, 11:39 AM
I'm on a CRV Head so It bolted on just fine for me, what K24 head do you have?
PetefromtheStreets
03-10-2014, 01:03 PM
I have a TSX k24a2 head
I plugged and ran a an fitting to the thermo housing.
s4 IG-petefromthestreets
Cage plus radio member #1
dkpr87
03-10-2014, 01:16 PM
I plugged and ran a an fitting to the thermo housing.
s4 IG-petefromthestreets
Cage plus radio member #1
Sounds like a good work around right there :-)
Magnus also makes a Center-Feed Manifold :-)
PetefromtheStreets
03-10-2014, 01:59 PM
Sounds like a good work around right there :-)
Magnus also makes a Center-Feed Manifold :-)
It eliminated me needing an adapter or a manifold specific for that style head. It worked perfectly
s4 IG-petefromthestreets
Cage plus radio member #1
dkpr87
03-10-2014, 02:17 PM
It eliminated me needing an adapter or a manifold specific for that style head. It worked perfectly
s4 IG-petefromthestreets
Cage plus radio member #1
I like where your head's at ;-)
dkpr87
03-14-2014, 04:19 PM
Alright guys, finally been able to make a good dent into getting this thing on the road.
Ordered some wheels *say what you want about Rep Wheels, i'm not trying to spend $2k on some wheels unless they're for the track LOL
Front: 15" XXR 531s +0mm Offset w/ 235-60-15 BiasPly M&H Street Master
Rear: 15" XXR 531 +20mm Offset w/ Whatever Tires LOL
The Parts from K-Tuned should be here by next week along with the wheels and tires
Ordered a 4-port Boost Solenoid from VitTuned (http://vittuned.com/)
So i should have everything buttoned up by next Saturday, including installed photos and hopefully a startup video
Si Speed 317
03-14-2014, 04:46 PM
Awesome update, make sure you post pics! 4 port was a solid choice as well.
dkpr87
03-14-2014, 05:02 PM
Awesome update, make sure you post pics! 4 port was a solid choice as well.
4 Port is Ideal for what the goal is for this car!
Trying to break the FWD Honda DOT Tire Record and what better way to break it then to one more record away from the B Series folks ;-)
we had a good conversation a long time ago about 3port vs 4port. Makes me want to swap also for more control
dkpr87
03-20-2014, 08:10 PM
we had a good conversation a long time ago about 3port vs 4port. Makes me want to swap also for more control
we'll see how it turns out :-)
hopefully it and some traction control will be the solution :-)
PetefromtheStreets
03-21-2014, 10:52 PM
4 Port is Ideal for what the goal is for this car!
Trying to break the FWD Honda DOT Tire Record and what better way to break it then to one more record away from the B Series folks ;-)
What is the current dot fwd honda record?
Sent from my stupid iPhone using Tapatalk
dkpr87
03-21-2014, 11:41 PM
What is the current dot fwd honda record?
Sent from my stupid iPhone using Tapatalk
http://youtu.be/DbIdLTkPdLc
CLM Motorsports Fernando Cunha Turbo Honda Civic - 10.33 @ 144 on M&H 235/60/15 DoT Tires
PetefromtheStreets
03-25-2014, 12:16 AM
http://youtu.be/DbIdLTkPdLc
CLM Motorsports Fernando Cunha Turbo Honda Civic - 10.33 @ 144 on M&H 235/60/15 DoT Tires
Sick!!
Sent from my stupid iPhone using Tapatalk
dkpr87
03-25-2014, 02:01 AM
Sick!!
Sent from my stupid iPhone using Tapatalk
We have a slew of goals with this car, the Ultimate Goal is the DOT Record, but building up to that, we want to make it as efficient as we can make it. As in, while using BBG and TC in tandem, along with the 4 port and possibly switching out to a BW EFR Turbo later on, we really want to make this as close to perfect a FWD street car can get.
PetefromtheStreets
03-25-2014, 10:00 AM
We have a slew of goals with this car, the Ultimate Goal is the DOT Record, but building up to that, we want to make it as efficient as we can make it. As in, while using BBG and TC in tandem, along with the 4 port and possibly switching out to a BW EFR Turbo later on, we really want to make this as close to perfect a FWD street car can get.
Well I'll say that 10.33 on a DOT tire is SICK. Anything faster would be classified as RIDICULOUS. Lol.
Sent from my stupid iPhone using Tapatalk
Frostydc5
03-25-2014, 10:06 AM
Well I'll say that 10.33 on a DOT tire is SICK. Anything faster would be classified as RIDICULOUS. Lol.
Sent from my stupid iPhone using Tapatalk
yeah thats fucking insane
dkpr87
03-25-2014, 10:15 AM
yeah thats fucking insane
Nothing against SFWD or the all out cars but I personally want it to be as close to a street-legal drag car as I can get it :-)
PetefromtheStreets
03-25-2014, 10:16 AM
Nothing against SFWD or the all out cars but I personally want it to be as close to a street-legal drag car as I can get it :-)
Going to have a CAT? Lol jk
Sent from my stupid iPhone using Tapatalk
dkpr87
03-25-2014, 10:19 AM
Going to have a CAT? Lol jk
Sent from my stupid iPhone using Tapatalk
You know... I am going to do full exhaust eventually and that may be added on to further prove a point but at this time no lol especially since it is hood exit right now LOL
dkpr87
03-27-2014, 03:16 AM
http://img.tapatalk.com/d/14/03/27/8a6yzy8a.jpg
Some goodies from K-Tuned! Thanks to Tim Grey Racing!!!
http://img.tapatalk.com/d/14/03/27/uqu6apaz.jpg
VitTuned 4-Port Boost Solenoid
http://img.tapatalk.com/d/14/03/27/adypuma5.jpg
Matt Hickam and I have been talking back and forth and I might be snagging this from him to give my 3pc some semblance of a frame.
Sent from my iPad using Tapatalk
dkpr87
03-27-2014, 03:21 AM
http://img.tapatalk.com/d/14/03/27/uze2a4y5.jpg
XXR 531s 15x8 +0mm and my new 235/60/15 BiasPly DOT Radials
http://img.tapatalk.com/d/14/03/27/2azerypy.jpg
-16AN Bungs welded on the Radiator Ends, new pics coming tomorrow!
Sent from my iPad using Tapatalk
dkpr87
04-03-2014, 12:03 AM
Just bought all the fluids and such, start up is slated for tomorrow!
PetefromtheStreets
04-03-2014, 10:27 AM
Just bought all the fluids and such, start up is slated for tomorrow!
Awwww yeaaaa!
Sent from my stupid iPhone using Tapatalk
dkpr87
04-03-2014, 10:36 AM
Awwww yeaaaa!
Sent from my stupid iPhone using Tapatalk
*fingers crossed*
dkpr87
04-03-2014, 01:38 PM
http://img.tapatalk.com/d/14/04/04/u8yrates.jpg
The guys at the shop sent me this :-)
Sent from my iPad using Tapatalk
ryaano18
04-03-2014, 03:08 PM
http://img.tapatalk.com/d/14/04/04/u8yrates.jpg
The guys at the shop sent me this :-)
Sent from my iPad using Tapatalk
now thats sexy!
dkpr87
04-03-2014, 11:09 PM
now thats sexy!
https://scontent-b-sjc.xx.fbcdn.net/hphotos-prn2/t1.0-9/1507952_737621006278742_99244774_n.jpg
Just a little bit more ;-)
PetefromtheStreets
04-04-2014, 12:04 AM
https://scontent-b-sjc.xx.fbcdn.net/hphotos-prn2/t1.0-9/1507952_737621006278742_99244774_n.jpg
Just a little bit more ;-)
I saw this pic on IG and I said I know that car. Just put 2 and 2 together. Lmao. Then the title of your thread sealed the deal. Humble performance. I like your guys attitude. It's a good outlook on life not just business. Keep up the good work and "stay humble" :thumb:
Sent from my stupid iPhone using Tapatalk
dkpr87
04-04-2014, 12:26 AM
I saw this pic on IG and I said I know that car. Just put 2 and 2 together. Lmao. Then the title of your thread sealed the deal. Humble performance. I like your guys attitude. It's a good outlook on life not just business. Keep up the good work and "stay humble" :thumb:
Sent from my stupid iPhone using Tapatalk
Yea lol been nibbling at this build for a solid 2 years now, and they've helped a great deal!
Looking good! When's it gonna be road ready?
dkpr87
04-04-2014, 10:37 AM
Looking good! When's it gonna be road ready?
Soon hopefully!!!
dkpr87
04-07-2014, 12:29 AM
The car started on Saturday! Tuning will be later this week!
Sent from my iPad using Tapatalk
Frostydc5
04-07-2014, 10:21 AM
The car started on Saturday! Tuning will be later this week!
Sent from my iPad using Tapatalk
saw Alex post a pic of it saying it was alive lol i got excited just because I;ve seen your build here lol
dkpr87
04-07-2014, 10:25 AM
saw Alex post a pic of it saying it was alive lol i got excited just because I;ve seen your build here lol
I'm ecstatic LOL can't wait to see it on the rollers
Frostydc5
04-07-2014, 10:40 AM
I'm ecstatic LOL can't wait to see it on the rollers
i can imagine man, make sure to post some videos!
dkpr87
04-07-2014, 10:41 AM
i can imagine man, make sure to post some videos!
Oh I will! I always have my DSLR with me :-)
dkpr87
04-07-2014, 11:52 PM
http://youtu.be/br28vT2zLWg
As Promised ;-)
stigrl06
04-08-2014, 12:22 AM
wow, she sounds so mean, reminds me of my hubbys 1st start up, just as loud
PetefromtheStreets
04-08-2014, 12:26 AM
Awesome man! Congrats on the official start up. Sound like you dreamed? Lol :thumb:
Sent from my stupid iPhone using Tapatalk
dkpr87
04-08-2014, 01:02 AM
wow, she sounds so mean, reminds me of my hubbys 1st start up, just as loud
It was amazing in person :-)
Awesome man! Congrats on the official start up. Sound like you dreamed? Lol :thumb
Everything and more sir
ryaano18
04-08-2014, 01:04 AM
http://youtu.be/br28vT2zLWg
As Promised ;-)
Yup... thats just win. Love it!!
dkpr87
04-08-2014, 01:05 AM
Yup... thats just win. Love it!!
Thanks man!!!!
monjarassi
04-08-2014, 01:07 AM
Loving it....
dkpr87
04-08-2014, 01:38 AM
hc3lxjJtj-8
Here's one i know you all will like ;-)
dkpr87
04-09-2014, 02:50 PM
car is on the dyno!!!
monjarassi
04-09-2014, 03:10 PM
Gl man, hope all goes well.
dkpr87
04-09-2014, 04:59 PM
630hp 412tq as of now, still tweaking it :biggrin:
dkpr87
04-09-2014, 10:00 PM
376
I'll just leave this here
monjarassi
04-09-2014, 10:17 PM
O lord.
#jawdroped
PetefromtheStreets
04-09-2014, 11:20 PM
Looks like 24-25psi. Sick numbers man! What fuel are you running in the beast?
Sent from my stupid iPhone using Tapatalk
dkpr87
04-09-2014, 11:21 PM
Looks like 24-25psi. Sick numbers man! What fuel are you running in the beast?
Sent from my stupid iPhone using Tapatalk
E85 sir ;')
Sent from my SAMSUNG-SM-N900A using Tapatalk
PetefromtheStreets
04-09-2014, 11:22 PM
E85 sir ;')
Sent from my SAMSUNG-SM-N900A using Tapatalk
Fuck that's awesome! E85 is amazing stuff. I may have to get hip one day.
Sent from my stupid iPhone using Tapatalk
dkpr87
04-09-2014, 11:23 PM
Fuck that's awesome! E85 is amazing stuff. I may have to get hip one day.
Sent from my stupid iPhone using Tapatalk
Dude just do it, the results are too good!
$ per HP can't beat it
Sent from my SAMSUNG-SM-N900A using Tapatalk
I wish there was more than one station in DE that sold E85....
Nice numbers though! What turbo and how much boost?
dkpr87
04-10-2014, 04:22 PM
I wish there was more than one station in DE that sold E85....
Nice numbers though! What turbo and how much boost?
we have a couple here in Tulsa, there use to be NONE at all
PTE 6766 CEA right now it's at 24psi
Si Speed 317
04-12-2014, 04:17 PM
NICE!!! E85 is a beautiful thing. E98 is next, its like 140 octane fuel but still rare
dkpr87
04-12-2014, 04:52 PM
NICE!!! E85 is a beautiful thing. E98 is next, its like 140 octane fuel but still rare
Yea E98 is pretty awesome! Just gotta be careful with the AFRs
Sent from my SAMSUNG-SM-N900A using Tapatalk
dkpr87
04-18-2014, 12:31 AM
http://img.tapatalk.com/d/14/04/18/yzepe3uj.jpg
Dat Three Piece Tho ;-)
Sent from my iPad using Tapatalk
monjarassi
04-18-2014, 12:55 AM
O Lawd...
dkpr87
04-21-2014, 12:09 AM
jdozw3TRI-s
Car still has some adjusting to go through
Sent from my iPad using Tapatalk
stigrl06
04-21-2014, 12:13 AM
o lawd
monjarassi
04-21-2014, 12:15 AM
highly impressive pass, id give anything to track mine that way.
Beast man beast,
What i find more impressive is that all that power and tq is being driven by a stock ep3 tranny.
Damn, that's a great pass! Do you have an LSD in your trans?
dkpr87
04-21-2014, 10:36 AM
Damn, that's a great pass! Do you have an LSD in your trans?
Not yet LOL
Sent from my SAMSUNG-SM-N900A using Tapatalk
PetefromtheStreets
04-21-2014, 10:38 AM
Not yet LOL
Sent from my SAMSUNG-SM-N900A using Tapatalk
Lmao. Damn! That cars yanking hard. That's awesome guys. Was that on your dot tires? Or slicks?
Sent from my stupid iPhone using Tapatalk
dkpr87
04-21-2014, 10:40 AM
Lmao. Damn! That cars yanking hard. That's awesome guys. Was that on your dot tires? Or slicks?
Sent from my stupid iPhone using Tapatalk
Slicks, not going DOT until I have LSD
Sent from my SAMSUNG-SM-N900A using Tapatalk
PetefromtheStreets
04-21-2014, 10:46 AM
Slicks, not going DOT until I have LSD
Sent from my SAMSUNG-SM-N900A using Tapatalk
Gotcha. You planning on running a spool instead?
Sent from my stupid iPhone using Tapatalk
dkpr87
04-21-2014, 10:57 AM
Gotcha. You planning on running a spool instead?
Sent from my stupid iPhone using Tapatalk
We're going to get LSD in there, just haven't gotten the chance yet
Frostydc5
04-21-2014, 11:02 AM
i saw this on FB i loved it!
dkpr87
04-21-2014, 11:37 AM
i saw this on fb i loved it!
thanks!!!!
Si Speed 317
04-29-2014, 12:25 AM
jdozw3TRI-s
Car still has some adjusting to go through
Sent from my iPad using Tapatalk
Hell yea!! Talk about pulling HARD... LSD next?
dkpr87
04-29-2014, 12:28 AM
Hell yea!! Talk about pulling HARD... LSD next?
Yessir, I shall be refraining from any track time until then LOL I think I've made my point so far no need to be stupid LOL I really wanted to go again but 518tq is something fierce on an open diff!!!
Sent from my SAMSUNG-SM-N900A using Tapatalk
dkpr87
05-20-2014, 05:26 PM
379
Street Wheels and Tires ;-)
Sent from my BADASS Samsung Galaxy Note 3, #MicDrop
ryaano18
05-20-2014, 08:17 PM
379
Street Wheels and Tires ;-)
Sent from my BADASS Samsung Galaxy Note 3, #MicDrop
I can never get tired of that front end!
monjarassi
05-20-2014, 09:31 PM
i spy bird poo on the door and mirror
dkpr87
05-20-2014, 09:40 PM
i spy bird poo on the door and mirror
Yes and that bird will die a slow and painful alka-seltzer related death LOL
Sent from my BADASS Samsung Galaxy Note 3, #MicDrop
monjarassi
05-20-2014, 09:51 PM
hell yea thats how i feel too brah
dkpr87
05-21-2014, 04:21 PM
hell yea thats how i feel too brah
Going to take it to get aligned in the coming weeks and still undecided whether to run it at IFO-Tulsa or just park it LOL
dkpr87
10-20-2014, 04:31 PM
https://scontent-a.xx.fbcdn.net/hphotos-xpa1/v/t1.0-9/s720x720/1016462_856297264411115_527372972503898309_n.jpg?o h=937f823d31153b375ab14a26000e49de&oe=54AB673E
Sorry for the lack of updates, i've been REEEEEEEEEAAAAALLYY busy hahahaha
So here's a quick shot of her 95% complete, just need to deal with some minor details but she's almost ready to have some fun ;-)
PetefromtheStreets
10-20-2014, 09:50 PM
https://scontent-a.xx.fbcdn.net/hphotos-xpa1/v/t1.0-9/s720x720/1016462_856297264411115_527372972503898309_n.jpg?o h=937f823d31153b375ab14a26000e49de&oe=54AB673E
Sorry for the lack of updates, i've been REEEEEEEEEAAAAALLYY busy hahahaha
So here's a quick shot of her 95% complete, just need to deal with some minor details but she's almost ready to have some fun ;-)
Do I spy belaks?
dkpr87
10-20-2014, 09:52 PM
Do I spy belaks?
Ooooooooooooh no LOL
XXR 531s
Belaks are Baller Out of Control lol
monjarassi
10-20-2014, 10:58 PM
Looks real good, lovely pic
dkpr87
10-21-2014, 10:31 AM
Looks real good, lovely pic
Thanks man!
No bird turds here hahahaha :fyea:
djtooon
10-21-2014, 11:50 PM
Car looks awesome !!:biggrin:
dkpr87
10-21-2014, 11:54 PM
Car looks awesome !!:biggrin:
Thanks man!!!!
dkpr87
10-29-2014, 04:49 PM
Update***
Dropping my trans to install Quaife LSD :-)
Making moves to get the car ready for a local test and tune and run it at least once before the year is over :-)
BoostedK20
10-30-2014, 12:04 AM
Update***
Dropping my trans to install Quaife LSD :-)
Making moves to get the car ready for a local test and tune and run it at least once before the year is over :-)
Great choice in LSD :thumb: What are you expecting to run, and with slicks/radials/street tires?
dkpr87
10-30-2014, 12:21 AM
Great choice in LSD :thumb: What are you expecting to run, and with slicks/radials/street tires?
well on it's first trip out literally fresh off the dyno and off the trailer it did a 10.7 @ 145 so im expecting similar if not better based on my driving, i doubt better off the bat since this will be the first time behind the wheel but idk who knows!
Slicks for now
monjarassi
10-30-2014, 12:23 AM
I'd settle for a 10.90s
dkpr87
10-30-2014, 12:29 AM
I'd settle for a 10.90s
Definitely LOL i would love to snap a 10.9 on my first trip to the track as the driver :-)
monjarassi
10-30-2014, 12:33 AM
Word
Shanket
10-30-2014, 01:24 AM
CLEAN BUILD LOOKS GREAT!!, how is the transmission holding up?? and are u on stock sleeves??
dkpr87
10-30-2014, 08:19 AM
CLEAN BUILD LOOKS GREAT!!, how is the transmission holding up?? and are u on stock sleeves??
Thanks man!!!
So far so good with the transmission, we'll see how it holds up once i get some back to back hits.
Yessir, stock sleeves!!!
Shanket
10-30-2014, 12:42 PM
Thanks man!!!
So far so good with the transmission, we'll see how it holds up once i get some back to back hits.
Yessir, stock sleeves!!!
welcome and sweet , nice power on stock sleeves im on stock too
dkpr87
10-30-2014, 03:09 PM
welcome and sweet , nice power on stock sleeves im on stock too
There are some others out there with 800+ on stock sleeves
Shanket
10-30-2014, 05:09 PM
There are some others out there with 800+ on stock sleeves
true
Shanket
10-30-2014, 05:09 PM
There are some others out there with 800+ on stock sleeves
true
dkpr87
10-30-2014, 05:16 PM
true
MurderDick from Speedfactory
Octavio from KMOD
2-3 cars from TreblicTuned
i think they're all on Stock Trans too! :giggle:
Shanket
10-30-2014, 05:28 PM
MurderDick from Speedfactory
Octavio from KMOD
2-3 cars from TreblicTuned
i think they're all on Stock Trans too! :giggle:
i know kmod isnt he is on gear x gears, i know used to be stock sleeves i think la sleeves now, i know terblictuned they are i have seen there crazy, i havent seen speed factory one yet but probably, and derftuned in florida did stock sleeves, and stock block made 760,
Shanket
10-30-2014, 05:30 PM
martin is on stock trans
dkpr87
10-30-2014, 05:30 PM
i know kmod isnt he is on gear x gears, i know used to be stock sleeves i think la sleeves now, i know terblictuned they are i have seen there crazy, i havent seen speed factory one yet but probably, and derftuned in florida did stock sleeves, and stock block made 760,
SpeedFactory/Murderdick Stock Sleeves 864hp (http://www.k20a.org/forum/showthread.php?t=90502)
Beautiful EK right there
Shanket
10-30-2014, 05:34 PM
SpeedFactory/Murderdick Stock Sleeves 864hp (http://www.k20a.org/forum/showthread.php?t=90502)
Beautiful EK right there
i have seen this it is beautiful car,
Si Speed 317
10-31-2014, 09:07 AM
There are some others out there with 800+ on stock sleeves
Treblic is a master at making lots of power consistently on a stock block
dkpr87
10-31-2014, 09:48 AM
Treblic is a master at making lots of power consistently on a stock block
Every single time i see an update from Treblic on Facebook i'm like... well lets see what stock sleeved monstrosity Treblic has unleashed today LOL
dkpr87
11-05-2014, 06:39 PM
Sooooooooooo, i'm thinking that my manifold is the root of my creep issues... i have one more test to do, to see if it really is the problem, if that is the case i have a two options...
A - Sell my manifold and buy a new one
B - Modify my manifold to work correctly
I was thinking something like this but not all out, more so placing the turbo slightly in front of the transmission and possibly trading or selling my intake manifold for a centerfeed to make it all fit :-)
http://i143.photobucket.com/albums/r135/ArmyDude87/10413899_1436743879909659_1575237619_n_zpsb7f49e43 .jpg
BoostedK20
11-05-2014, 07:58 PM
Sooooooooooo, i'm thinking that my manifold is the root of my creep issues... i have one more test to do, to see if it really is the problem, if that is the case i have a two options...
A - Sell my manifold and buy a new one
B - Modify my manifold to work correctly
I was thinking something like this but not all out, more so placing the turbo slightly in front of the transmission and possibly trading or selling my intake manifold for a centerfeed to make it all fit :-)
http://i143.photobucket.com/albums/r135/ArmyDude87/10413899_1436743879909659_1575237619_n_zpsb7f49e43 .jpg
Well, this photo makes it very tempting to run that! Oil return must be fun on that setup. Whose car is that?
dkpr87
11-05-2014, 08:18 PM
Well, this photo makes it very tempting to run that! Oil return must be fun on that setup. Whose car is that?
Yea lol
Nothing exactly the same but something close you know :-)
BoostedK20
11-06-2014, 08:43 PM
Yea lol
Nothing exactly the same but something close you know :-)
So what do you think you'll end up doing?
dkpr87
11-06-2014, 08:44 PM
So what do you think you'll end up doing?
Sell the manifold :-/
BoostedK20
11-06-2014, 08:54 PM
Sell the manifold :-/
And get one similar to the picture you posted above?
dkpr87
11-06-2014, 08:57 PM
And get one similar to the picture you posted above?
I'm thinking of getting one fabbed up by Tim@Turbo Elements with the help of Josh@Finishing Lines too. Something similar to the old AFI Top Mount they made for the TSXs possibly selling it with the wastegate too since I may go with a 60mm gate
Si Speed 317
11-11-2014, 12:33 AM
Sounds fun and expensive :D gonna stay single gate or go dual?
Sent from my SM-G900T using Tapatalk
dkpr87
11-11-2014, 12:39 AM
Sounds fun and expensive :D gonna stay single gate or go dual?
Sent from my SM-G900T using Tapatalk
well.... im going to do a pull with a new smaller spring and see if it works, and if it does then we're still good, if not well.... dual 46mm gates or a sing 60.... idk yet lol
dkpr87
12-01-2014, 03:06 PM
Finally got my LSD installed and trans is now back on the car!
I need to source a pair of headlight wire harnesses since my car has no headlight harnesses :-/
I'm also considering going full exhaust instead of keeping it hood exit... anyone wanna talk me out of it LOL
PetefromtheStreets
12-01-2014, 08:37 PM
Finally got my LSD installed and trans is now back on the car!
I need to source a pair of headlight wire harnesses since my car has no headlight harnesses :-/
I'm also considering going full exhaust instead of keeping it hood exit... anyone wanna talk me out of it LOL
Ill talk you out of it. Its not as racecar going full exhaust. Lol
dkpr87
12-01-2014, 08:48 PM
Ill talk you out of it. Its not as racecar going full exhaust. Lol
LOL is that your best attempt
Sooooooooooo, i'm thinking that my manifold is the root of my creep issues... i have one more test to do, to see if it really is the problem, if that is the case i have a two options...
A - Sell my manifold and buy a new one
B - Modify my manifold to work correctly
I was thinking something like this but not all out, more so placing the turbo slightly in front of the transmission and possibly trading or selling my intake manifold for a centerfeed to make it all fit :-)
http://i143.photobucket.com/albums/r135/ArmyDude87/10413899_1436743879909659_1575237619_n_zpsb7f49e43 .jpg
That's not such a bad idea... More weight in front of the front tires is always good.
dkpr87
12-03-2014, 11:13 AM
That's not such a bad idea... More weight in front of the front tires is always good.
I like the idea in theory but after doing all the math, i'm better off just leaving it alone as it is for now and working on the boost settings and tune, the problem should be there i think, because i have friends with similar setups without the issues i have so i think i need to just do a couple of logs and see what's going on.
Well.... i finally got the transmission back on LOL and i'm getting everything else bolted back on, i do however need to find a pair of stock headlight harnesses for an eg -____-
PetefromtheStreets
12-03-2014, 11:41 AM
I like the idea in theory but after doing all the math, i'm better off just leaving it alone as it is for now and working on the boost settings and tune, the problem should be there i think, because i have friends with similar setups without the issues i have so i think i need to just do a couple of logs and see what's going on.
Well.... i finally got the transmission back on LOL and i'm getting everything else bolted back on, i do however need to find a pair of stock headlight harnesses for an eg -____-
What's your cell number I'll make a post on Facebook for you
dkpr87
12-03-2014, 12:01 PM
What's your cell number I'll make a post on Facebook for you
Sent
btw.... you know what i love..... getting called out to race when my car is obviously not all together yet..... LOL
by slower cars for that matter.....
PetefromtheStreets
12-03-2014, 01:02 PM
Sent
btw.... you know what i love..... getting called out to race when my car is obviously not all together yet..... LOL
by slower cars for that matter.....
Happens to all of us. I was called out as well by someone who knows I just broke it again. Lol
dkpr87
12-03-2014, 01:10 PM
Happens to all of us. I was called out as well by someone who knows I just broke it again. Lol
LOL it's like ok guys... we all know I havent put more than 20 miles on the car since it was dyno'd and yes we all know my driving isn't the best... you see that i'm quiet about it, i barely post pics of the car anymore because trolls are eeeeeeverywhere.....
PetefromtheStreets
12-03-2014, 02:09 PM
LOL it's like ok guys... we all know I havent put more than 20 miles on the car since it was dyno'd and yes we all know my driving isn't the best... you see that i'm quiet about it, i barely post pics of the car anymore because trolls are eeeeeeverywhere.....
I will still talk shit lol just not about racing my car
monjarassi
12-03-2014, 02:26 PM
Same here not posting pics or info no mo
dkpr87
12-03-2014, 02:39 PM
I will still talk shit lol just not about racing my car
I remember how many people were talking shit about my car until it was dyno'd and put down 700+ *silence in the facebooks* it looks like i'm going to have to make an example of a couple of cars LOL
Same here not posting pics or info no mo
Yea man, it just sucks because you want to share it you know, since it's something that your proud of, but nope.... haters errrywheeerre
PetefromtheStreets
12-03-2014, 03:54 PM
I remember how many people were talking shit about my car until it was dyno'd and put down 700+ *silence in the facebooks* it looks like i'm going to have to make an example of a couple of cars LOL
Yea man, it just sucks because you want to share it you know, since it's something that your proud of, but nope.... haters errrywheeerre
I Just would like my car to stay together longer then 27hrs. Lol
dkpr87
12-03-2014, 03:55 PM
I Just would like my car to stay together longer then 27hrs. Lol
i feels your pain man
I like the idea in theory but after doing all the math, i'm better off just leaving it alone as it is for now and working on the boost settings and tune, the problem should be there i think, because i have friends with similar setups without the issues i have so i think i need to just do a couple of logs and see what's going on.
Well.... i finally got the transmission back on LOL and i'm getting everything else bolted back on, i do however need to find a pair of stock headlight harnesses for an eg -____-
I have a very strong feeling the tune and boost settings will not fix your problem. I went through this, and those things do not fix a physical problem with the manifold. Also, just because it works for someone else doesn't mean it will necessarily work for you; I am speaking from experience. Best of luck with everything.
Turpid Porpoise
12-09-2014, 11:36 AM
You could always run a manifold like the JDL wastegate priority manifold to help ease the creep issues. It would allow you to easily run a pipe from the mani to a front mount turbo.
Si Speed 317
12-11-2014, 12:53 AM
But I guess its worth a shot of the tune asjustment first, although I'd go straight to the souce: manifold
You could always run a manifold like the JDL wastegate priority manifold to help ease the creep issues. It would allow you to easily run a pipe from the mani to a front mount turbo.
I don't understand why every manifold isn't 'wastegate priority' it's practically the most important part. If you can't properly control boost, then you just have a ticking time bomb. If you ever look at good v8 turbo setups on race cars, they are all 'wastegate priority' in the sense that there is always a very straight forward flow into the wastegate and the wastegate neck is always after the merge collector. Like here:
https://scontent-a-iad.xx.fbcdn.net/hphotos-xap1/v/t1.0-9/10603272_738401202915562_6733845331368850111_n.jpg ?oh=f1d9befab3838d2dbd7ed965462b4943&oe=5547928F
dkpr87
01-05-2015, 10:50 AM
I have a very strong feeling the tune and boost settings will not fix your problem. I went through this, and those things do not fix a physical problem with the manifold. Also, just because it works for someone else doesn't mean it will necessarily work for you; I am speaking from experience. Best of luck with everything.
I'm going back and forth on that, i may end up getting it before i put the car down for winter rest at the end of the season and deal with the car as it sits right now for the time being
You could always run a manifold like the JDL wastegate priority manifold to help ease the creep issues. It would allow you to easily run a pipe from the mani to a front mount turbo.
That's the manifold i'm considering, if not i may just go Gangsta Lean, i have a whole year to figure out which one i'll go with.
But I guess its worth a shot of the tune asjustment first, although I'd go straight to the souce: manifold
Yea, me and the other two guys helping me with the car have been going back and forth, i think we all know what HAS to be done, but my wallet doesn't have the coin to make it happen now so i'll probably have to wait a little bit, and go with what i have for now.
I don't understand why every manifold isn't 'wastegate priority' it's practically the most important part. If you can't properly control boost, then you just have a ticking time bomb. If you ever look at good v8 turbo setups on race cars, they are all 'wastegate priority' in the sense that there is always a very straight forward flow into the wastegate and the wastegate neck is always after the merge collector. Like here:
https://scontent-a-iad.xx.fbcdn.net/hphotos-xap1/v/t1.0-9/10603272_738401202915562_6733845331368850111_n.jpg ?oh=f1d9befab3838d2dbd7ed965462b4943&oe=5547928F
Probably bang v buck, material costs, and profit... if i'd have to guess
dkpr87
01-07-2015, 10:16 AM
Approx** 600hp E85 Street Tune
Approx** 750hp Q16 Race Tune
Well LOL looking back at the thread and cleaning it up a bit, we never thought it would do what it did LOL
Almost ready for Race Season!!!
Finish Trans (Fresh Oil)
Turbo Return Line
Driver Side Axle
Boot is Leaking
Fuel Filter Install
Yup... car didn't have one... thought it did... paid for one too... but nope didn't
have one
IAT Sensor Install
Re-positioning it
Intercooler Piping Reinstall
Wiring
Chassis wiring, headlights, brake lights, reverse lights, turn signals, etc....
car may "need" HIDs though
Vacuum Lines
Considering a Push-Loc Setup
Uppipe Bracket
My Uppipe moves when the engine is under load... vband FTL
That's what's pending so far
dkpr87
03-16-2015, 10:07 AM
Update!
Sold my PLM and replaced it with a T4 Turbo Elements K Series Sidewinder Manifold (http://www.turboelements.com/index.php?route=product/product&path=63_99&product_id=214)
http://i143.photobucket.com/albums/r135/ArmyDude87/1896951_10152962942879039_4771977341780394852_n_zp szml0te29.jpg
Had him relocate the WG Flange to the rear of the manifold to be able to access the wastegate easier
http://i143.photobucket.com/albums/r135/ArmyDude87/11026105_10152962942939039_6018252666356239844_n_z psgbdpxk7q.jpg
PetefromtheStreets
03-16-2015, 10:14 AM
Update!
Sold my PLM and replaced it with a T4 Turbo Elements K Series Sidewinder Manifold (http://www.turboelements.com/index.php?route=product/product&path=63_99&product_id=214)
http://i143.photobucket.com/albums/r135/ArmyDude87/1896951_10152962942879039_4771977341780394852_n_zp szml0te29.jpg
Had him relocate the WG Flange to the rear of the manifold to be able to access the wastegate easier
http://i143.photobucket.com/albums/r135/ArmyDude87/11026105_10152962942939039_6018252666356239844_n_z psgbdpxk7q.jpg
Sick man. Can't wait to see it up again. I am about to update my thread with info from the track last night.
Powered by vBulletin® Version 4.2.5 Copyright © 2024 vBulletin Solutions Inc. All rights reserved.