BoostedK20 Chat!

[PetefromtheStreets]

Lmao Yea I saw that too and it's true tho.

s4 IG-petefromthestreets

[monjarassi]

I feel sorry for this customers first name!!!

http://farm8.staticflickr.com/7377/9941547375_8aed7b7d6b_c.jpg

[PetefromtheStreets]

I feel sorry for this customers first name!!!

http://farm8.staticflickr.com/7377/9941547375_8aed7b7d6b_c.jpg

LMFAOOO

s4 IG-petefromthestreets

[SAX JONZ]

At track. Car ran a 13.6 1st run, then a 13.2. I shut it down early and took off easy. I don't want to get kicked out but I was told if I ran faster than 14 W/O flame jacket I would. Last run. Going for twelve and done. Nervous like the first time I had sex. Lol:D

[SAX JONZ]

Adam, what were your numbers?

[monjarassi]

13s...... Come on give us a real number drive it like u stole it

[PetefromtheStreets]

Adam, what were your numbers?

Those are decent Street tire times. With the power your making you should be able to get a little lower ET's.

I made 330 whp and went 12.9 @112
Slicks went 11.9 @115

And just a few weeks ago on slicks untuned revving to 6500 and breaking up I ran 12.1 @115.



13s...... Come on give us a real number drive it like u stole it

Agreed but don't get to hard on the trans. Lol

s4 IG-petefromthestreets

[SAX JONZ]

My first time. They keep trying to line up rear tires with water. No traction first time. Second time was better.
Car hit wall so lost almost an hour waiting. Last run and done. Ill keep ya posted. If they let mr. 15 minutes and they are closing.

[aLmk]

At track. Car ran a 13.6 1st run, then a 13.2. I shut it down early and took off easy. I don't want to get kicked out but I was told if I ran faster than 14 W/O flame jacket I would. Last run. Going for twelve and done. Nervous like the first time I had sex. Lol:D
Wtf!! You don't need a flame jacket for 13s.... Just a helmet.

[SAX JONZ]

Maybe the guy was thinking I'd break in to the 12's? When do you need a flame retardant jacket? 12's and if car does 11's?

[PetefromtheStreets]

Maybe the guy was thinking I'd break in to the 12's? When do you need a flame retardant jacket? 12's and if car does 11's?

12's are still just a helmet. But all tracks are different. 11's require a cage then a 150trap is a chute and 10pt cage

s4 IG-petefromthestreets

[SAX JONZ]

Good to know. Also wondering how many trips down the track before trans goes.

[PetefromtheStreets]

Good to know. Also wondering how many trips down the track before trans goes.

No real set number. It all depends on varying factors

s4 IG-petefromthestreets

[ksboi]

Its great boost weather in southern arizona.

[Si Speed 317]

Its awesome boost weather in CT, NJ, and NY too!

[ksboi]

Its going to be warm in Egypt!

[SAX JONZ]

Here too. Last night I felt the ponies a stampeding.

[PetefromtheStreets]

Md is boost happy too. I see all the turbo cars coming out. My car rips through 3rd so much harder now.

s4 IG-petefromthestreets

[Si Speed 317]

I love boost weather.

[monjarassi]

Down in here in tx we getting there slowly

[monjarassi]

https://fbcdn-sphotos-a-a.akamaihd.net/hphotos-ak-ash4/1000905_526221410766972_452967930_n.jpg

[aLmk]

https://fbcdn-sphotos-a-a.akamaihd.net/hphotos-ak-ash4/1000905_526221410766972_452967930_n.jpg
Haha, I've seen this before, but I got something against it :giggle:

http://www.youtube.com/watch?v=tN55DQjkPCc

[Spaz]

morning all

[PetefromtheStreets]

Morning. Wonderful weather so far today in the streets of Baltimore

s4 IG-petefromthestreets

[aLmk]

I'm planning to go to Cecil county drag way tonight if anyone that is local to that wants to join, lmk.

[Spaz]

My new boost gauge came in. Excited to go pick it up after work and install it.

[monjarassi]

:fyea:

http://farm8.staticflickr.com/7359/10078877085_10b8485ce2_c.jpg

http://farm3.staticflickr.com/2874/10078833024_fe4311c0c7_c.jpg

[Si Speed 317]

:fyea:

http://farm8.staticflickr.com/7359/10078877085_10b8485ce2_c.jpg

http://farm3.staticflickr.com/2874/10078833024_fe4311c0c7_c.jpg

Nice!



Anyone going to Fall Nationals this weekend at Englishtown in NJ?

[monjarassi]

It's getting there......

[aLmk]

Is anyone else's forum all white and weird looking?

[monjarassi]

no not mine and i have a bit of a confession.

So i never sold my turbo i sent it off to PTE for inspection since its under warranty and got a call today.

Nothing but great news, they gonna clean it up for me and wrap it all up and ship it back, he said my turbo was deff more than ready for the round 2!!!

[PetefromtheStreets]

So I'm in Texas for the week. Looking forward to some golf.
http://img.tapatalk.com/d/13/10/10/nyza9e2a.jpg

s4 IG-petefromthestreets

[monjarassi]

O yea what city??

[Si Speed 317]

NICE! Gotta meet monjarassi and get some footage/shota of the beast

[Si Speed 317]

no not mine and i have a bit of a confession.

So i never sold my turbo i sent it off to PTE for inspection since its under warranty and got a call today.

Nothing but great news, they gonna clean it up for me and wrap it all up and ship it back, he said my turbo was deff more than ready for the round 2!!!

Sick!!

[monjarassi]

hell yea if hes in houston hit me up

[PetefromtheStreets]

O yea what city??

Im in Giddings, Tx. Its East of Austin about 40 or so miles.

s4 IG-petefromthestreets

[monjarassi]

dang

[PetefromtheStreets]

dang

Where are you in this huge state of Texas?

s4 IG-petefromthestreets

[monjarassi]

Houston

[monjarassi]

customers car i just finished tucking!!!

http://farm3.staticflickr.com/2883/10237062106_ac2f0a97dc_c.jpg

http://farm4.staticflickr.com/3671/10236963604_5b5d07c680_c.jpg

[PetefromtheStreets]

Dude that looks amazing

s4 IG-petefromthestreets now Free ('http://tapatalk.com/m?id=10')

[monjarassi]

hell yea man thanks

[monjarassi]

heres the car b4

http://www.ddperformanceresearch.com/images-bc/Customer%20build%20photos/Javeed/updates10.jpg

[monjarassi]

will be creating a showoff tonight for him

[BoostedK20]

monjarassi I'm eager to see it

[monjarassi]

A local member has been helping me out in touching up some over looked interior pcs and as we help each other out in our builds heres a sneak peak of whats going on.
Ry-worx customs FTW!!!!!

http://farm4.staticflickr.com/3675/10256208866_731a1f7a9f_c.jpg

http://farm9.staticflickr.com/8135/10256211346_eababaa6cb_c.jpg

and officially done. waiting on paint now..

http://farm3.staticflickr.com/2873/10257022475_3872967027_c.jpg

[boosted_teg]

i need a twin disc, 2200cc injectors and some sleeves.. *dreams of the money tree growing*

[monjarassi]

Why so brotha....

[Si Speed 317]

Looks awesome! Nicely done. No more music for that racecar?
boosted_teg I know the feeling. I need a built trans and motor. Bah humbug

[1JZ_Type-S]

Is PPG still around? All I can find are 5-gear Quaife transmissions for $8000 +

[Si Speed 317]

Is PPG still around? All I can find are 5-gear Quaife transmissions for $8000 +

I believe they are. I'll look into it

[echo3gulf]

i need to start looking at tranny builds.

[aLmk]

Is PPG still around? All I can find are 5-gear Quaife transmissions for $8000 +
Yes they definitely are, and they definitely still make straight cut gears for the k series transmission. In the past they also made semi-helical cut gears (much better for a street car), but as of recent that hasn't been listen on their website. This doesn't mean they don't still offer it, but it isn't advertised :shrug:

[aLmk]

http://www.8thcivic.com/forums/mechanical-problems-technical-chat/383130-chain-slap-but-not-chain-slap.html
Any advice would be appreciated.

[echo3gulf]

Will they make any gears tho like for instance a higher gear ration like the EP3 thranny for our car instead of the stock gears?

[aLmk]

Will they make any gears tho like for instance a higher gear ration like the EP3 thranny for our car instead of the stock gears?
The PPG ratios were not the stock ratios, they were their own thing, and they were appropriate for a boosted k IMO, you just need to select the appropriate final drive for your power level.

[echo3gulf]

Good info see if i couldnt afford the ppg gears i was just gonna do EP3 1-5 and then the Acura TSX 6th gear. I heard they are stronger then our stock gears.

[PetefromtheStreets]

The PPG ratios were not the stock ratios, they were their own thing, and they were appropriate for a boosted k IMO, you just need to select the appropriate final drive for your power level.

Yea they used their own ratios. And they also make a 1-2 gears set and a 3-4 gears set as well so you can go in stages of you will. I'm looking to upgrade to a ep3 3-4 and get the ppl 1-2 to help out my 60' times and trap

s4 IG-petefromthestreets now Free ('http://tapatalk.com/m?id=10')

[Frostydc5]

Yea they used their own ratios. And they also make a 1-2 gears set and a 3-4 gears set as well so you can go in stages of you will. I'm looking to upgrade to a ep3 3-4 and get the ppl 1-2 to help out my 60' times and trap

s4 IG-petefromthestreets now Free ('http://tapatalk.com/m?id=10')

i assume your looking into this to donate to me right, of course thats the case i know no need to answer... continue lol

[PetefromtheStreets]

i assume your looking into this to donate to me right, of course thats the case i know no need to answer... continue lol

Lmao How'd you know that

s4 IG-petefromthestreets now Free ('http://tapatalk.com/m?id=10')

[MajorWeak]

Is there a nsfw section? If not where can we make nsfw threads?

[Si Speed 317]

Is there a nsfw section? If not where can we make nsfw threads?

Actually, there is. boosted_teg started one
http://www.BoostedK20.com/forums/showthread.php?t=595

[boosted_teg]

post away ;) i just added some stuff

[monjarassi]

trying to get this guy to join!!!

http://i1185.photobucket.com/albums/z346/Ben_Salasko/IMG_0179.jpg

[PetefromtheStreets]

trying to get this guy to join!!!

http://i1185.photobucket.com/albums/z346/Ben_Salasko/IMG_0179.jpg

Who's that? I like it lol

s4 IG-petefromthestreets

[monjarassi]

Who's that? I like it lol

s4 IG-petefromthestreets


RWD K24/K20 with Precision 5862 t4 divided 17psi

[monjarassi]

Looking to purchase this FMIC for the ep3 any help where to find it??

http://www.synapseturbo.com/gallery/cache/47b09bbe9235bdcf8fa1c845314f978be55bd505_800.jpg

[PetefromtheStreets]

Looking to purchase this FMIC for the ep3 any help where to find it??

http://www.synapseturbo.com/gallery/cache/47b09bbe9235bdcf8fa1c845314f978be55bd505_800.jpg

Treadstone makes em

s4 IG-petefromthestreets

[PetefromtheStreets]

RWD K24/K20 with Precision 5862 t4 divided 17psi

That's sick Lol. Who is it? What kind of car?

s4 IG-petefromthestreets

[monjarassi]

Treadstone makes em

s4 IG-petefromthestreets

i want this one cause of the way the top IC pipe wraps around the radiator thats what i need

[monjarassi]

That's sick Lol. Who is it? What kind of car?

s4 IG-petefromthestreets

2006 Noble M400.

[PetefromtheStreets]

i want this one cause of the way the top IC pipe wraps around the radiator thats what i need

It's just how the coupler is on there they used a 90 degree. And my friend Bottled Morphine has the same fmic from Treadstone

s4 IG-petefromthestreets

[monjarassi]

It's just how the coupler is on there they used a 90 degree. And my friend Bottled Morphine has the same fmic from Treadstone

s4 IG-petefromthestreets


aaaaahhhhhh very true!!!

Can u post up a pic of his plz??

Trying to avoid a custom FMIC setup and pay lots in fabbing

[PetefromtheStreets]

aaaaahhhhhh very true!!!

Can u post up a pic of his plz??

Trying to avoid a custom FMIC setup and pay lots in fabbing

His car is still being fabbef up as we speak but when we placed his radiator we moved it to where it could be ran the exact same way. It is just their 900hp core fmic I believe.

s4 IG-petefromthestreets

[monjarassi]

His car is still being fabbef up as we speak but when we placed his radiator we moved it to where it could be ran the exact same way. It is just their 900hp core fmic I believe.

s4 IG-petefromthestreets


nice any specs on the FMIC

[PetefromtheStreets]

nice any specs on the FMIC

Hold on I'll grab some brb

s4 IG-petefromthestreets

[PetefromtheStreets]

Wrong info just a sec
s4 IG-petefromthestreets

[monjarassi]

Hold on I'll grab some brb

s4 IG-petefromthestreets

:paper:

[PetefromtheStreets]

:paper:

http://www.treadstoneperformance.com/product.phtml?p=34&cat_key=63&prodname=TRV25+Series+Intercooler++1000HP

This intercooler is 3.50" thick, and will easily support 1492 CFM's 1000HP at max efficiency 1.5psi pressure drop. 1-Year Warranty. Intercooler will come with no logo, "Treadstone" logo can be requested in Blue, Black, or Red.Overall Size 26.50" X 12.00" X 3.50"Core Size 25.00" X 6.00" X 3.50"3.00" Inlet/Outlet1000 Hp efficientMounting tabs for easy installationAvailable in two configurations, O stands for oppositte facing endtanks, S stands for same side facing endtanks!



s4 IG-petefromthestreets

[monjarassi]

http://www.treadstoneperformance.com/product.phtml?p=34&cat_key=63&prodname=TRV25+Series+Intercooler++1000HP

This intercooler is 3.50" thick, and will easily support 1492 CFM's 1000HP at max efficiency 1.5psi pressure drop. 1-Year Warranty. Intercooler will come with no logo, "Treadstone" logo can be requested in Blue, Black, or Red.Overall Size 26.50" X 12.00" X 3.50"Core Size 25.00" X 6.00" X 3.50"3.00" Inlet/Outlet1000 Hp efficientMounting tabs for easy installationAvailable in two configurations, O stands for oppositte facing endtanks, S stands for same side facing endtanks!



s4 IG-petefromthestreets



Great info.

So u say this FMIC fit with the endtanks clearing the rad side with a 90degree coupler.
I think a 1000hp rated fmic is over kill

[PetefromtheStreets]

Great info.

So u say this FMIC fit with the endtanks clearing the rad side with a 90degree coupler.
I think a 1000hp rated fmic is over kill

You could get their 720hp fmic it's 2.5" inlet/outlet instead of 3"

s4 IG-petefromthestreets

[aLmk]

RWD K24/K20 with Precision 5862 t4 divided 17psi
What chassis?

Looking to purchase this FMIC for the ep3 any help where to find it??

http://www.synapseturbo.com/gallery/cache/47b09bbe9235bdcf8fa1c845314f978be55bd505_800.jpg
Well the one pictured is by synapse turbo, they have a website, they are located in NY.

That's sick Lol. Who is it? What kind of car?

s4 IG-petefromthestreets
:yeahthat:

[monjarassi]

Cause i once had the TRV185 Series Intercooler, n it was way too small!!!

http://farm6.static.flickr.com/5059/5587251155_1b8f1297fe_z.jpg

Ill have to make some measurements when i get home tonight

[monjarassi]

And here is the trv25 on a rsx

http://i462.photobucket.com/albums/qq349/boostedrsxtypes/downsized_1028001519.jpg

[PetefromtheStreets]

Cause i once had the TRV185 Series Intercooler, n it was way too small!!!

http://farm6.static.flickr.com/5059/5587251155_1b8f1297fe_z.jpg

Ill have to make some measurements when i get home tonight

The 1000HP one would be larger. and it's only a 1.5psi drop so it's pretty good.

My friend was looking to sell his and get the 1300hp one

s4 IG-petefromthestreets

[monjarassi]

What chassis?

Well the one pictured is by synapse turbo, they have a website, they are located in NY.

:yeahthat:

Its on a earlier post

ANd synapse just got back at me on the price for that FMIC only!!!! 825 shipped 2 week wait :wow:

[monjarassi]

2006 Noble M400.


here!!!!!

[PetefromtheStreets]

Its on a earlier post

ANd synapse just got back at me on the price for that FMIC only!!!! 825 shipped 2 week wait :wow:

My friend ordered his from kmod. It was the same way.

s4 IG-petefromthestreets

[monjarassi]

My friend ordered his from kmod. It was the same way.

s4 IG-petefromthestreets

im just gonna stick with the treadstone one... :party:

[PetefromtheStreets]

im just gonna stick with the treadstone one... :party:

It's a :party: it's a :party:

s4 IG-petefromthestreets

[Bottled Morphine]

Let's hope that holds true

[vdubkilla]

And here is the trv25 on a rsx

http://i462.photobucket.com/albums/qq349/boostedrsxtypes/downsized_1028001519.jpg

I have this one on my eg and it works well for me

[Bottled Morphine]

I have this one on my eg and it works well for me

How much hp or psi if you don't mind me asking.

Sent from my HTC One using Tapatalk

[vdubkilla]

How much hp or psi if you don't mind me asking.

Sent from my HTC One using Tapatalk

It sees over 550 regularly and I have had it over 650 w/o issue and typical 18 - 24 lbs it has seen 30 psi plus on an old t 3 manifold I had that creeped bad .

[PetefromtheStreets]

It sees over 550 regularly and I have had it over 650 w/o issue and typical 18 - 24 lbs it has seen 30 psi plus on an old t 3 manifold I had that creeped bad .

Stock motor nonetheless

s4 IG-petefromthestreets

[vdubkilla]

Stock motor nonetheless

s4 IG-petefromthestreets

Not any more lol although I did push the stock engine to 585/414 and it hit boost cut many many times at 30 psi

[PetefromtheStreets]

Not any more lol although I did push the stock engine to 585/414 and it hit boost cut many many times at 30 psi

K series ftw. LOL

s4 IG-petefromthestreets

[vdubkilla]

K series ftw. LOL

s4 IG-petefromthestreets

Oh indeed I love when ya go by somebodys house raising hell and then get a text or a fb message LOL saying Got Dam man was that u hahahaha

[PetefromtheStreets]

Oh indeed I love when ya go by somebodys house raising hell and then get a text or a fb message LOL saying Got Dam man was that u hahahaha

Lmaooo exactly. Seems my car runs best on the street. Every time I visit the track I end up towing it home lol

s4 IG-petefromthestreets

[vdubkilla]

Lmaooo exactly. Seems my car runs best on the street. Every time I visit the track I end up towing it home lol

s4 IG-petefromthestreets

I always break mine on the street believe it or not but its probably from the abuse it has seen on the track in the past those 6500 rpm launches .I'm gonna keep it off the track for now and like you said have fun on the street with it .

[monjarassi]

any pix of the fmic palcement on ur car??

[PetefromtheStreets]

I always break mine on the street believe it or not but its probably from the abuse it has seen on the track in the past those 6500 rpm launches .I'm gonna keep it off the track for now and like you said have fun on the street with it .

Lmaooo I hear you I launched At 7k my first season boosted Lol noob mistake

s4 IG-petefromthestreets

[echo3gulf]

I have an Swift Racing Technology intercooler for sale if your interested monjarassi

[PetefromtheStreets]

I have an Swift Racing Technology intercooler for sale if your interested monjarassi

Fun fact: that company moved right next door to my job. Can't wait to hear them dynoing

s4 IG-petefromthestreets

[monjarassi]

I have an Swift Racing Technology intercooler for sale if your interested monjarassi

Pm me price.

[Lilwhit14]

Trying to figure out why my car is throwing a PCM failure code and why it only does it in my higher gears, 4-6

[PetefromtheStreets]

Trying to figure out why my car is throwing a PCM failure code and why it only does it in my higher gears, 4-6

Alternator issue? Too little current for the load?

s4 IG-petefromthestreets

[Bottled Morphine]

Fun fact: that company moved right next door to my job. Can't wait to hear them dynoing

s4 IG-petefromthestreets

I'm headed up there soon to check that out!

Sent from my HTC One using Tapatalk

[Lilwhit14]

Alternator issue? Too little current for the load?

s4 IG-petefromthestreets

Haven't thought about that. Never really crossed my mind bc I didn't think it would throw a ecu failure code

[aLmk]

Fun fact: that company moved right next door to my job. Can't wait to hear them dynoing

s4 IG-petefromthestreets
O really? I've been to their old shop for a dyno day years back...

[PetefromtheStreets]

O really? I've been to their old shop for a dyno day years back...

Yea their new shop doesn't have the dyno in yet. They are getting an AWD dyno now

s4 IG-petefromthestreets

[vdubkilla]

any pix of the fmic palcement on ur car??

I'm not sure if you were talking to me or somebody else but I looked and the pics I can find of the ic all have a towel or blanket covering it as I generally do that while the bumper is off so I don't mess up the ic.

[monjarassi]

thanks all i have found my fmic for my build!!!

[Bottled Morphine]

thanks all i have found my fmic for my build!!!

The swift one?

Sent from my HTC One using Tapatalk

[monjarassi]

The swift one?

Sent from my HTC One using Tapatalk


yes
Huge 24"x 10.5" x 3" Front Mount Intercooler rated at 600+HP

- Garrett High Density Intercooler core,
- CAD designed and CNC machined end caps for optimized flow.

[PetefromtheStreets]

yes
Huge 24"x 10.5" x 3" Front Mount Intercooler rated at 600+HP

- Garrett High Density Intercooler core,
- CAD designed and CNC machined end caps for optimized flow.

Very nice man

s4 IG-petefromthestreets

[Bottled Morphine]

yes
Huge 24"x 10.5" x 3" Front Mount Intercooler rated at 600+HP

- Garrett High Density Intercooler core,
- CAD designed and CNC machined end caps for optimized flow.

Nice man, it'll be sweet to see that thing installed on your build.

Sent from my HTC One using Tapatalk

[PetefromtheStreets]

Nice man, it'll be sweet to see that thing installed on your build.

Sent from my HTC One using Tapatalk

TRUUU

s4 IG-petefromthestreets

[monjarassi]

im thankfull to the member that stepped up and offered it.. Im in :love: with it and excited

http://www.8thcivic.com/forums/attachments/turbocharging/31178d1277856649-my-srt-race-c-u-t-kit-build-photo0027.jpg

[PetefromtheStreets]

im thankfull to the member that stepped up and offered it.. Im in :love: with it and excited

http://www.8thcivic.com/forums/attachments/turbocharging/31178d1277856649-my-srt-race-c-u-t-kit-build-photo0027.jpg

Sick man. will look good on the ep3

s4 IG-petefromthestreets

[monjarassi]

itll be a first too

[Bottled Morphine]

itll be a first too

You fancy

Sent from my HTC One using Tapatalk

[PetefromtheStreets]

You fancy

Sent from my HTC One using Tapatalk

Lol he certainly is

s4 IG-petefromthestreets

[monjarassi]

hehehehehe

[monjarassi]

To all my built members in here, what assembly lube did yall use per preference when assebling bottom end and cylinder head??

[PetefromtheStreets]

To all my built members in here, what assembly lube did yall use per preference when assebling bottom end and cylinder head??

Believe it molly assembly lube, or ARP assembly lube. I'll have to look at my father's house to be sure.

s4 IG-petefromthestreets

[Bottled Morphine]

Believe it molly assembly lube, or ARP assembly lube. I'll have to look at my father's house to be sure.

s4 IG-petefromthestreets

Yeah I thought it was the arp lube

Sent from my HTC One using Tapatalk

[monjarassi]

Yeah I thought it was the arp lube

Sent from my HTC One using Tapatalk

I was looking for something thats good and can be found locally, dont want to be waiting on it to be shipped nor pay shipping

[PetefromtheStreets]

I was looking for something thats good and can be found locally, dont want to be waiting on it to be shipped nor pay shipping

My local pepboys has some in stock. Try there if you have it in Texas

s4 IG-petefromthestreets

[monjarassi]

some ppl have recommended using this one.

http://shop.advanceautoparts.com/wcsstore/CVWEB/staticproductimage//N3565/large/12028851_ptx_81950_pri_larg.jpg

can anyone vouch

[Si Speed 317]

I can't, unfortunately. Frostydc5 vdubkilla soxfan143

[Frostydc5]

Yeah can't vouch either

[PetefromtheStreets]

some ppl have recommended using this one.

http://shop.advanceautoparts.com/wcsstore/CVWEB/staticproductimage//N3565/large/12028851_ptx_81950_pri_larg.jpg

can anyone vouch

THATS EXACTLY WHAT I USED!

s4 IG-petefromthestreets

[Si Speed 317]

THATS EXACTLY WHAT I USED!

s4 IG-petefromthestreets

Guys blown 4 motors. Speaks from experience. Idk if thats good or not. Haha i had to

[Bottled Morphine]

Guys blown 4 motors. Speaks from experience. Idk if thats good or not. Haha i had to

Oooo Ooo kill em!

Sent from my HTC One using Tapatalk

[PetefromtheStreets]

Guys blown 4 motors. Speaks from experience. Idk if thats good or not. Haha i had to

LMMFAOOO


Oooo Ooo kill em!

Sent from my HTC One using Tapatalk


You consigning ass.


s4 IG-petefromthestreets

[Bottled Morphine]

Your*

Sent from my HTC One using Tapatalk

[PetefromtheStreets]

Your*

Sent from my HTC One using Tapatalk

Oh excuse me. Sorry.

s4 IG-petefromthestreets

[Bottled Morphine]

No problem man, check your texts!!

Sent from my HTC One using Tapatalk

[vdubkilla]

To all my built members in here, what assembly lube did yall use per preference when assebling bottom end and cylinder head??

I used lucas assembly lube http://www.summitracing.com/parts/luc-10153-1?seid=srese1&gclid=CLOw8ciCn7oCFcud4AodTwYAZQ and also have a bottle the permatek stuff that I didn't need/use . I would recommend getting arp assembly lube for the head bolts/ studs as well as the main bearing bolts .http://www.summitracing.com/parts/arp-100-9910/overview/

[snizzletoff]

I used lucas assembly lube http://www.summitracing.com/parts/luc-10153-1?seid=srese1&gclid=CLOw8ciCn7oCFcud4AodTwYAZQ and also have a bottle the permatek stuff that I didn't need/use . I would recommend getting arp assembly lube for the head bolts/ studs as well as the main bearing bolts .http://www.summitracing.com/parts/arp-100-9910/overview/

I used the permatex stuff without an issue. My arp studs came with the recommended lube but it is certainly a necessity. Torquing the bolts dry is actually a different spec then using the lube from what I've read

Sent from my HTCONE using Tapatalk 2

[vdubkilla]

Here is an excellent video / demonstration

http://youtu.be/6-XXVk_vwKw

[monjarassi]

wow ill deff use that shat!!!!

But that works well on headstuds and........ ??

The lube i want to have is for the bearings?

[snizzletoff]

wow ill deff use that shat!!!!

But that works well on headstuds and........ ??

The lube i want to have is for the bearings?
The assembly lube from arp is just for the head studs and bolts. You want to use regular engine assembly lube for the bearings on the crank, rods, and cams


Sent from my HTCONE using Tapatalk 2

[monjarassi]

The assembly lube from arp is just for the head studs and bolts. You want to use regular engine assembly lube for the bearings on the crank, rods, and cams


Sent from my HTCONE using Tapatalk 2



coo coo thanks ma ppl

[aLmk]

Here is an excellent video / demonstration

http://youtu.be/6-XXVk_vwKw
What is the point of multiple cycles? Is that just if you tear it down and have to put it back together?

[vdubkilla]

The assembly lube from arp is just for the head studs and bolts. You want to use regular engine assembly lube for the bearings on the crank, rods, and cams


Sent from my HTCONE using Tapatalk 2

Sorry out in the garage working on the quad but :goodpost: but also use it on the rod bolts and large main bearing "bolts" that go thru the lower girdle


What is the point of multiple cycles? Is that just if you tear it down and have to put it back together?

He is just doing that to show the differences in the demonstration

[PetefromtheStreets]

What is the point of multiple cycles? Is that just if you tear it down and have to put it back together?

Yea its showing you how consistent it is when you use the proper lube.

s4 IG-petefromthestreets

[monjarassi]

a trip back memory lane...
k24a1 on a revHard kit...

http://farm6.staticflickr.com/5168/5234900999_018a16d170_b.jpg

[MajorWeak]

Thats my turbo set up. What fmic is that?

[Bottled Morphine]

a trip back memory lane...
k24a1 on a revHard kit...

http://farm6.staticflickr.com/5168/5234900999_018a16d170_b.jpg

Looks clean bro

Sent from my HTC One using Tapatalk

[ksboi]

Was thinking what would better to run on hotside of turbo .82 or .62? Both will spool to high rpms but the benfit of the faster dpool of .62.

[Bottled Morphine]

Was thinking what would better to run on hotside of turbo .82 or .62? Both will spool to high rpms but the benfit of the faster dpool of .62.

The smaller the A/R on the exhaust side, the quicker the spoolup, but typically less top end flow. A larger A/R on the exhaust side will make for slower spoolup, but more top end flow.

The way it was explained to me was, think of it as blowing air through a straw (small A/R) verses blowing through a 3 inch diameter pipe (larger A/R).

When you blow through the straw, the velocity of the air coming out of the end of the straw will be quite high. However, the straw cannot handle larger amounts of airflow because of its small diameter.

If you were to blow through a 3 inch pipe though, the speed of the air coming out the other end would not be as high. The large diameter of the pipe means it can handle large amounts of airflow.

What are your goals? Log manifold? Custom kit? Probably been posted before but I'm not too active.

Sent from my HTC One using Tapatalk

[PetefromtheStreets]

The smaller the A/R on the exhaust side, the quicker the spoolup, but typically less top end flow. A larger A/R on the exhaust side will make for slower spoolup, but more top end flow.

The way it was explained to me was, think of it as blowing air through a straw (small A/R) verses blowing through a 3 inch diameter pipe (larger A/R).

When you blow through the straw, the velocity of the air coming out of the end of the straw will be quite high. However, the straw cannot handle larger amounts of airflow because of its small diameter.

If you were to blow through a 3 inch pipe though, the speed of the air coming out the other end would not be as high. The large diameter of the pipe means it can handle large amounts of airflow.

Sent from my HTC One using Tapatalk



:goodpost: and great analogy

s4 IG-petefromthestreets

[Si Speed 317]

Was thinking what would better to run on hotside of turbo .82 or .62? Both will spool to high rpms but the benfit of the faster dpool of .62.

.82 is perfect unless you plan on doing autoX. .62 or .63 is justvway too small. Lilwhit14 can vouch for that ;)

[Bottled Morphine]

Match your exhaust housing to rpm characteristics you will be using, compressor map match the motor. /close

Sent from my HTC One using Tapatalk

[Si Speed 317]

Match your exhaust housing to rpm characteristics you will be using, compressor map match the motor. /close

Sent from my HTC One using Tapatalk

You just closed a chat thread.


#Bawse

[PetefromtheStreets]

You just closed a chat thread.


#Bawse

Lmao

s4 IG-petefromthestreets

[Bottled Morphine]

You just closed a chat thread.


#Bawse

Hahaha :)

Sent from my HTC One using Tapatalk

[Si Speed 317]

Before another topic gets brought up, can someone (@adm_rsx, vdubkilla, monjarassi, Bottled Morphine, etc) make an engine lube assembly type of thread in the engine section for future reference? Deserves to be a sticky too. Please let me know who wants to do the honors

[Lilwhit14]

Was thinking what would better to run on hotside of turbo .82 or .62? Both will spool to high rpms but the benfit of the faster dpool of .62.

Yes I can vouche for that. Don't go smaller than an .82. I'm about to get a gt35 that has an exhaust housing of .9 something or might even be a 1.00. Can't recall off the top of my head. Trying to figure out my ecu problem before I start swapping turbos though.

[monjarassi]

Thats my turbo set up. What fmic is that?

It's a treadstone

[Bottled Morphine]

Before another topic gets brought up, can someone (@adm_rsx, vdubkilla, monjarassi, Bottled Morphine, etc) make an engine lube assembly type of thread in the engine section for future reference? Deserves to be a sticky too. Please let me know who wants to do the honors

Adam would have more experience than me in that department.

Sent from my HTC One using Tapatalk

[Si Speed 317]

Yes I can vouche for that. Don't go smaller than an .82. I'm about to get a gt35 that has an exhaust housing of .9 something or might even be a 1.00. Can't recall off the top of my head. Trying to figure out my ecu problem before I start swapping turbos though.

Thanks man, much appreciated. The more we can help each other, the better.

And just a quick note, unless you're running a built motor and plan on tracking as a main, you shouldn't go higher than a .8x IMO. Gets to be a huge hot side and takes forever and a day or two to spool. (Says the guy with the GT42R with a 1.15 A/R hot side :facepalm: :self:)

[Bottled Morphine]

Thanks man, much appreciated. The more we can help each other, the better.

And just a quick note, unless you're running a built motor and plan on tracking as a main, you shouldn't go higher than a .8x IMO. Gets to be a huge hot side and takes forever and a day or two to spool. (Says the guy with the GT42R with a 1.15 A/R hot side :facepalm: :self:)

I forgot what my hotside is... Sounds like a fun ride though



Sent from my HTC One using Tapatalk

[snizzletoff]

Yes I can vouche for that. Don't go smaller than an .82. I'm about to get a gt35 that has an exhaust housing of .9 something or might even be a 1.00. Can't recall off the top of my head. Trying to figure out my ecu problem before I start swapping turbos though.


Thanks man, much appreciated. The more we can help each other, the better.

And just a quick note, unless you're running a built motor and plan on tracking as a main, you shouldn't go higher than a .8x IMO. Gets to be a huge hot side and takes forever and a day or two to spool. (Says the guy with the GT42R with a 1.15 A/R hot side :facepalm: :self:)

:yeahthat: I agree with this completely. If you get a hotside to big it will just have a lazy spool. It does really depend on the turbo because a very appropriately sized turbo with a higher A/R will still spool well. I had a .64 on my 6262 and the spool was good for what it was. Still made 550+ and still wasn't seeing any restriction.

[vdubkilla]

I run a 35r twin Scroll with a 1.06 hot side and it spools as good as my 30r did I am in love with the turbo .Ask anyone who has been in my car and they will vouch it has pretty well 0 lag and has no problem racing / beating supercharged K s from a dig .

[PetefromtheStreets]

I run a 35r twin Scroll with a 1.06 hot side and it spools as good as my 30r did I am in love with the turbo .Ask anyone who has been in my car and they will vouch it has pretty well 0 lag and has no problem racing / beating supercharged K s from a dig .

I can vouch for that spool. Boss status. Ever since I saw your car dyno I've been in love.

s4 IG-petefromthestreets

[vdubkilla]

Thanks Adam I think the Twin scroll is the key to the quick spool and it makes for a tight fit in the eg bay . I don't think they make a twin scroll set up for the 8th gens and I'm not sure about the rsx chassis .I just did my first 4 th gear pull to red line last night on the new map / build and the car is feeling great it spools great down low but the top end is just :wow:

[snizzletoff]

I run a 35r twin Scroll with a 1.06 hot side and it spools as good as my 30r did I am in love with the turbo .Ask anyone who has been in my car and they will vouch it has pretty well 0 lag and has no problem racing / beating supercharged K s from a dig .

Twinscroll setups aren't exactly in the same boat as my statement. they are a different ball game :giggle:

[vdubkilla]

I wasn't really responding to your statement snizz I was referring to an earlier comment concerning the 35r

[vdubkilla]

Who posted my car on FB ?

[Bottled Morphine]

I'm running a custom twinscroll on my built k24, Borg warner 67mm 1.10a/r I believe. Going by what you're saying vdub it's gonna be sick.

Sent from my HTC One using Tapatalk

[vdubkilla]

These pics were posted in a private section of this forum and should not have been posted imo

[monjarassi]

Who the Fuck posted my car on FB pisses me off

link

[Bottled Morphine]

Somebody better tell somebody to take my car off Fb I don't post pics on my own fb and am pissed that they did this .These pics were posted in a private section of this forum and should not have been posted imo .I guess I won't be posting any more pics on here knowing this .

On fb?? I don't have one sadly or I would.

Sent from my HTC One using Tapatalk

[vdubkilla]

delete

[vdubkilla]

Boosted k 20 posted it on their Fb page along with my user name

[monjarassi]

Boosted k 20 posted it on their Fb page along with my user name not something I thought they would do else I would never have posted a picture on here and I'll be sure not to post any more ttyl guys I'm out for a while til they respond to my request to remove the pic from fb

:sadwavey: itll get fixed man sorry for what happened doh..

[BoostedK20]

Somebody better tell somebody to take my car off Fb I don't post pics on my own fb and am pissed that they did this .These pics were posted in a private section of this forum and should not have been posted imo .I guess I won't be posting any more pics on here knowing this .


I gonna link my ass right off this forum if that post stays up


Boosted k 20 posted it on their Fb page along with my user name not something I thought they would do else I would never have posted a picture on here and I'll be sure not to post any more ttyl guys I'm out for a while til they respond to my request to remove the pic from fb

Mark, the fault was mine. I deleted all posts and traces of it. Complete mistake, I should've spoke to you first.
I've never had an issue with posting any cars before as everyone is excited to have their car featured by BoostedK20. I honestly forgot that you are very quiet about your car, and I sincerely apologize for that.

However, I, along with the BoostedK20 staff, have put in an extreme amount of time creating this community and home to what it is today. I understand that you're upset, but that animosity is a bit unjust. I have stood by you in the past, right or wrong, and I value your participation on this forum. In fact, everyone does. We all make mistakes, and this was an honest and absolute mistake on my part. Everything was taken off about 10-15 minutes ago, no traces are left.

[vdubkilla]

Mark, the fault was mine. I deleted all posts and traces of it. Complete mistake, I should've spoke to you first.
I've never had an issue with posting any cars before as everyone is excited to have their car featured by BoostedK20. I honestly forgot that you are very quiet about your car, and I sincerely apologize for that.

However, I, along with the BoostedK20 staff, have put in an extreme amount of time creating this community and home to what it is today. I understand that you're upset, but that animosity is a bit unjust. I have stood by you in the past, right or wrong, and I value your participation on this forum. In fact, everyone does. We all make mistakes, and this was an honest and absolute mistake on my part. Everything was taken off about 10-15 minutes ago, no traces are left.

I understand but when post are put into a private section "supporter sections " you expect they won't be shared with the world. I guess I am wrong to have expected that .As far as my being unjust doesn't this forum have a place/ thread for pic submissions ? I am sorry to be upset but I don't post pics of my car on my own fb .It wasn't so much that as it was posting my car and user name whats next my address ?? I'm upset about it and yep a lil crazy at times ask anyone who knows me .I appreciate your removing the post and hope it does not happen again .

[BoostedK20]

I understand but when post are put into a private section "supporter sections " you expect they won't be shared with the world. I guess I am wrong to have expected that .As far as my being unjust doesn't this forum have a place/ thread for pic submissions ? I am sorry to be upset but I don't post pics of my car on my own fb .It wasn't so much that as it was posting my car and user name whats next my address ?? I'm upset about it and yep a lil crazy at times ask anyone who knows me .I appreciate your removing the post and hope it does not happen again .

It won't happen again. I did not realize it was from the private section of the forum. I didn't go to the post today and take the picture from it, it was saved on my personal database - something along the lines of an 'offshore account'. So, I had no idea thats where it was from. However, there are no excuses. It was an accident, and won't happen again. And you are right, that's why it's a private section. Those posts aren't accessable by anyone except those allowed in the VIP section. They are unsearchable by any search engine, they're practically non-existant. And that is why I am publicly apologizing for my mistake - which is something I hope you can accept.

Although this is a chat thread, let's keep the rest of this convo in PM.

[MajorWeak]

It's a treadstone

What were your numbers with that k24a1 setup and psi it was pushing? Guessing the motor was stock?

[monjarassi]

What were your numbers with that k24a1 setup and psi it was pushing? Guessing the motor was stock?

on the crv motor stock, i made 350hp and 310ishhh tq, this was on 14lbs on the revhard kit.

I then went on and did the vtec killer setup and on a PTE 6031 i made 410hp and the tq unknown on only 10.8lbs of boost.

[Si Speed 317]

What were your numbers with that k24a1 setup and psi it was pushing? Guessing the motor was stock?

Just gonna jump out and say that the results have to be a bit unfair - log manifolds are quite inefficient and make things tough.

[monjarassi]

Just gonna jump out and say that the results have to be a bit unfair - log manifolds are quite inefficient and make things tough.

thats very true but i have a member i recruited coming over soon with his build thread and the results will blow our mind.

[MajorWeak]

Just gonna jump out and say that the results have to be a bit unfair - log manifolds are quite inefficient and make things tough.

Yeah, i hate my kit, but it came with the motor so what can i say. I thought about getting the PLM sidewinder but not sure about the quality. The setup I want down the road is a sidewinder w/ a 6262 BB boosting maybe 7psi. It is still my daily after all. Plus i'm not even on a Kpro. So my number are weak.

[monjarassi]

Yeah, i hate my kit, but it came with the motor so what can i say. I thought about getting the PLM sidewinder but not sure about the quality. The setup I want down the road is a sidewinder w/ a 6262 BB boosting maybe 7psi. It is still my daily after all. Plus i'm not even on a Kpro. So my number are weak.

well the PLM wil work fine with a slightly bigger turbo that the 6262, but again youll need a better motor to spool it.

I have 3 guys i seen go through problems with that manifold, o cracks doh

[PetefromtheStreets]

Yeah, i hate my kit, but it came with the motor so what can i say. I thought about getting the PLM sidewinder but not sure about the quality. The setup I want down the road is a sidewinder w/ a 6262 BB boosting maybe 7psi. It is still my daily after all. Plus i'm not even on a Kpro. So my number are weak.

Why no kpro session?

s4 IG-petefromthestreets

[Bottled Morphine]

Yeah, i hate my kit, but it came with the motor so what can i say. I thought about getting the PLM sidewinder but not sure about the quality. The setup I want down the road is a sidewinder w/ a 6262 BB boosting maybe 7psi. It is still my daily after all. Plus i'm not even on a Kpro. So my number are weak.

Before you buy another manifold, buy kpro.

Sent from my HTC One using Tapatalk

[MajorWeak]

Why no kpro session?

s4 IG-petefromthestreets

I got this weird reflash ecu when i purchased the motor. It is meant for a revhard kit on a stock k20a2. It is tuned by Hondata for daily use.


well the PLM wil work fine with a slightly bigger turbo that the 6262, but again youll need a better motor to spool it.

I have 3 guys i seen go through problems with that manifold, o cracks doh

That is what i want to avoid. I rather spend the extra $ just so i don't have to deal with that headache. Their was a guy on ephatch running a 6262 on a stock motor, but he stop posting long ago. He never said if he was tuned or his numbers. I wonder how his motor handled it.


Before you buy another manifold, buy kpro.

Sent from my HTC One using Tapatalk

I have one sitting in my spare parts room. Just never put it in cause the closest tuning shop is in Seattle. which is about 2 hrs drive. I would have to trailer the car down there. I figured why not use the reflash and save for the kit i want plus other parts then get dyno tuned.

[Bottled Morphine]

Ahhhh ok, as long as the reflash is meant for it. Cool man.

Sent from my HTC One using Tapatalk

[monjarassi]

I got this weird reflash ecu when i purchased the motor. It is meant for a revhard kit on a stock k20a2. It is tuned by Hondata for daily use.



That is what i want to avoid. I rather spend the extra $ just so i don't have to deal with that headache. Their was a guy on ephatch running a 6262 on a stock motor, but he stop posting long ago. He never said if he was tuned or his numbers. I wonder how his motor handled it.



I have one sitting in my spare parts room. Just never put it in cause the closest tuning shop is in Seattle. which is about 2 hrs drive. I would have to trailer the car down there. I figured why not use the reflash and save for the kit i want plus other parts then get dyno tuned.


Sorry man i meant no cracks yet from them but creep issues on a turbo smaller than a 6262.

I know man ephatch is dead lately thats sad doh!!!

[vdubkilla]

Sorry for getting ticked off earlier today fellas. I just had a bad morning then seen that post on fb and kinda flipped out :madd: .I enjoy this forum more than most and feel a part of it and plan to continue to be here and share my boosted K series experience and expand it with all the knowledge from other members .I am not the most knowledgeable but am glad to share anything I may be able to except maybe pics of my car :biggrin: Again sorry Dan sorry everybody for my post earlier today .Today was proof I can be an asshole but I'll try not to make it a regular occurrence on here .

[monjarassi]

Sorry for getting ticked off earlier today fellas. I just had a bad morning then seen that post on fb and kinda flipped out :madd: .I enjoy this forum more than most and feel a part of it and plan to continue to be here and share my boosted K series experience and expand it with all the knowledge from other members .I am not the most knowledgeable but am glad to share anything I may be able to except maybe pics of my car :biggrin: Again sorry Dan sorry everybody for my post earlier today .Today was proof I can be an asshole but I'll try not to make it a regular occurrence on here .

thats a team player!!! Glad it all got sorted out

[BoostedK20]

Sorry for getting ticked off earlier today fellas. I just had a bad morning then seen that post on fb and kinda flipped out :madd: .I enjoy this forum more than most and feel a part of it and plan to continue to be here and share my boosted K series experience and expand it with all the knowledge from other members .I am not the most knowledgeable but am glad to share anything I may be able to except maybe pics of my car :biggrin: Again sorry Dan sorry everybody for my post earlier today .Today was proof I can be an asshole but I'll try not to make it a regular occurrence on here .

It happens. ;) Whats important is that everything was addressed, fixed, and we move forward. And boost!

[PetefromtheStreets]

Sorry for getting ticked off earlier today fellas. I just had a bad morning then seen that post on fb and kinda flipped out :madd: .I enjoy this forum more than most and feel a part of it and plan to continue to be here and share my boosted K series experience and expand it with all the knowledge from other members .I am not the most knowledgeable but am glad to share anything I may be able to except maybe pics of my car :biggrin: Again sorry Dan sorry everybody for my post earlier today .Today was proof I can be an asshole but I'll try not to make it a regular occurrence on here .

Your a valued member on here. Any experience is good experience when is shared with a community to better us as a whole.



It happens. ;) Whats important is that everything was addressed, fixed, and we move forward. And boost!

Truuuu.

Side note: today would be a great day to wear those fancy new hoodies! :biggrin:


s4 IG-petefromthestreets

[vdubkilla]

Your a valued member on here. Any experience is good experience when is shared with a community to better us as a whole.




Truuuu.

Side note: today would be a great day to wear those fancy new hoodies! :biggrin:


s4 IG-petefromthestreets

Thanks Adam and I agree cool weather pretty stoked to get the hoodie

[Bottled Morphine]

Boost weather...Adam pay my shop bill.

Sent from my HTC One using Tapatalk

[aLmk]

Yeah, i hate my kit, but it came with the motor so what can i say. I thought about getting the PLM sidewinder but not sure about the quality. The setup I want down the road is a sidewinder w/ a 6262 BB boosting maybe 7psi. It is still my daily after all. Plus i'm not even on a Kpro. So my number are weak.
Why do you want such a large turbo for only 7 psi?

I got this weird reflash ecu when i purchased the motor. It is meant for a revhard kit on a stock k20a2. It is tuned by Hondata for daily use.



That is what i want to avoid. I rather spend the extra $ just so i don't have to deal with that headache. Their was a guy on ephatch running a 6262 on a stock motor, but he stop posting long ago. He never said if he was tuned or his numbers. I wonder how his motor handled it.



I have one sitting in my spare parts room. Just never put it in cause the closest tuning shop is in Seattle. which is about 2 hrs drive. I would have to trailer the car down there. I figured why not use the reflash and save for the kit i want plus other parts then get dyno tuned.
You could always have Vit tune it.

Sorry man i meant no cracks yet from them but creep issues on a turbo smaller than a 6262.

I know man ephatch is dead lately thats sad doh!!!
Really? That doesn't make much sense. Larger turbos are more prone to creep than smaller ones...

[monjarassi]

Why do you want such a large turbo for only 7 psi?

You could always have Vit tune it.

Really? That doesn't make much sense. Larger turbos are more prone to creep than smaller ones...



yupp this is only on the PLM manifold

[PetefromtheStreets]

Boost weather...Adam pay my shop bill.

Sent from my HTC One using Tapatalk

Lmaooo first Frostydc5 wants me to buy him a trans. Now your shop bill. Smh. Think I'm made of money?

s4 IG-petefromthestreets

[Bottled Morphine]

Good question almk, didn't see that, yeah why a 62mm for 7psi...future goals?

Sent from my HTC One using Tapatalk

[vdubkilla]

Crank that shit up ^^

[aLmk]

Good question almk, didn't see that, yeah why a 62mm for 7psi...future goals?

Sent from my HTC One using Tapatalk
Are you asking me? :giggle:

But that makes sense, just the 6262 is huge. 700hp turbo!

[Bottled Morphine]

Nah, major weak

Sent from my HTC One using Tapatalk

[vdubkilla]

Glad to see this chat is getting pretty active lately

[Bottled Morphine]

Yeah, Adam brought me in, mine is nearing completion and the excitement it too much to bare lol.

Sent from my HTC One using Tapatalk

[PetefromtheStreets]

Glad to see this chat is getting pretty active lately

As am I man. It's good to see


Yeah, Adam brought me in, mine is nearing completion and the excitement it too much to bare lol.

Sent from my HTC One using Tapatalk

I'm too Damn excited too. Lol

s4 IG-petefromthestreets

[vdubkilla]

Yeah, Adam brought me in, mine is nearing completion and the excitement it too much to bare lol.

Sent from my HTC One using Tapatalk

You bought a set of injectors from me a while back you gonna run them or did I see them for sale again and you goin smaller ?

[Bottled Morphine]

You bought a set of injectors from me a while back you gonna run them or did I see them for sale again and you goin smaller ?

Nope, they're in my -10 rail right now!

Sent from my HTC One using Tapatalk

[Si Speed 317]

Glad to see this chat is getting pretty active lately

Me too! :turbohug:

[PetefromtheStreets]

Nope, they're in my -10 rail right now!

Sent from my HTC One using Tapatalk

We should start a -10an rail crew.

s4 IG-petefromthestreets

[vdubkilla]

Hell I'm running a -10 feed line lmao talk about over kill

[vdubkilla]

Nope, they're in my -10 rail right now!

Sent from my HTC One using Tapatalk

Good to hear are you and Adam goin to wcf ? or anyone on here for that matter

[PetefromtheStreets]

Hell I'm running a -10 feed line lmao talk about over kill

I'm running dual -8 feed Lol that's over kill for most. Yours is insanity!

s4 IG-petefromthestreets

[Bottled Morphine]

Pfft, dual 10's. Get at me. Idk though. Honestly, it may be overkill? I'm using e85 though. I think -8's would've sufficed but meh. I got a fuel system for a sfwd car as Adam likes to get on me about. Hopefully the numbers back it up.

Sent from my HTC One using Tapatalk

[vdubkilla]

Pfft, dual 10's. Get at me. Idk though. Honestly, it may be overkill? I'm using e85 though. I think -8's would've sufficed but meh. I got a fuel system for a sfwd car as Adam likes to get on me about. Hopefully the numbers back it up.

Sent from my HTC One using Tapatalk

Dual 10 s good gawd and yeah I have a rather large fuel set up myself as I like to be certain it's not gonna want for fuel at any time

[Bottled Morphine]

Dual 10 s good gawd and yeah I have a rather large fuel set up myself as I like to be certain it's not gonna want for fuel at any time

That was my exact reason for doing it!

Sent from my HTC One using Tapatalk

[Bottled Morphine]

It's just gonna return any unused fuel anyway.

Sent from my HTC One using Tapatalk

[PetefromtheStreets]

That was my exact reason for doing it!

Sent from my HTC One using Tapatalk


Dual 10 s good gawd and yeah I have a rather large fuel set up myself as I like to be certain it's not gonna want for fuel at any time

Fuel system king crew members 1 & 2

s4 IG-petefromthestreets

[Bottled Morphine]

Awwwwww Yeahhhh

Sent from my HTC One using Tapatalk

[vdubkilla]

Haha I put the fuel system together for e 85 then realized I can't get it around here anywhere

[Bottled Morphine]

Haha I put the fuel system together for e 85 then realized I can't get it around here anywhere

Yeah I remember you said that, a station is 23mins from me. And I brought a 15 gallon tank to fill up just in case. Guess I kinda lucked out.

Sent from my HTC One using Tapatalk

[Si Speed 317]

Haha I put the fuel system together for e 85 then realized I can't get it around here anywhere

Lmao!


Side note: just copped a dope deal on Infinity speakers, both fronts and rears with the full installation kit and pigtails brand new - $100 cash. Score!

[vdubkilla]

Lmao!


Side note: just copped a dope deal on Infinity speakers, both fronts and rears with the full installation kit and pigtails brand new - $100 cash. Score!

Nice thats a good deal for a nice set of speakers Infinity makes nice stuff I had an Infinity set up in my old grand cherokee and loved it


Yeah I remember you said that, a station is 23mins from me. And I brought a 15 gallon tank to fill up just in case. Guess I kinda lucked out.

Sent from my HTC One using Tapatalk

Yeah nearest station is 2 hours away that stuff doesn't have good shelf life so I didn't wanna have it sitting around it's just easier for me to run 93 oct pump gas for now til they get e 85 around here

[MajorWeak]

Good question almk, didn't see that, yeah why a 62mm for 7psi...future goals?

Sent from my HTC One using Tapatalk

Yeah, once it's not my daily i plan on cranking the boost up. Just thinking ahead. 6262 is a big turbo i could use a smaller one even with my plans. I just hate having to sell parts and buy what i really want down the road. it's just a waste of money in the long run.


Are you asking me? :giggle:

But that makes sense, just the 6262 is huge. 700hp turbo!


Nah, major weak

Sent from my HTC One using Tapatalk

:rotfl: That just made my day

[monjarassi]

ima be building my fuel system next month!!!

Deciding what size feed to use cause im leaving my -6 as a return

[Bottled Morphine]

ima be building my fuel system next month!!!

Deciding what size feed to use cause im leaving my -6 as a return

Sweet man, you're making some major moves.

Fuel system king crew member #1

[Si Speed 317]

Are you asking me? :giggle:

But that makes sense, just the 6262 is huge. 700hp turbo!



Nah, major weak

Sent from my HTC One using Tapatalk

Lmao! That worked out well.

Speaking of which, need to sell this GT42R sitting in my room. I made a temporary lamp out of it...

[Bottled Morphine]

Pics!

Fuel system king crew member #1

[monjarassi]

pics of the lamp

[PetefromtheStreets]

In for pics as well

s4 IG-petefromthestreets

[monjarassi]

i bet homeboy taking a pic, uploading and editing as we speak!!!

[PetefromtheStreets]

i bet homeboy taking a pic, uploading and editing as we speak!!!

Right Lol

s4 IG-petefromthestreets

[Si Speed 317]

No editing here! Once I get home I'll snap a picture lol

[Si Speed 317]

My GT42RS Lamp:

http://img.tapatalk.com/d/13/10/19/2yjy6uhu.jpg

http://img.tapatalk.com/d/13/10/19/y6edu6a4.jpg

LED FTW
http://img.tapatalk.com/d/13/10/19/ety6yqys.jpg

[Bottled Morphine]

Lol nice man ^^^ you just got 1400 parts laying around like it's nothing eh? You fancy.

Fuel system king crew member #1

[Si Speed 317]

Lol nice man ^^^ you just got 1400 parts laying around like it's nothing eh? You fancy.

Fuel system king crew member #1
Well, depends on what you're looking at. It's a $2300 turbo, at the cheapest. Then theres the rubber plunger aith the bottom cut off, and a $1 LED booklight from the dollar store. Boom

[Bottled Morphine]

Well, depends on what you're looking at. It's a $2300 turbo, at the cheapest. Then theres the rubber plunger aith the bottom cut off, and a $1 LED booklight from the dollar store. Boom

Oh weeee

Fuel system king crew member #1

[Bottled Morphine]

Why'd you decide not to use it?

Fuel system king crew member #1

[Si Speed 317]

Why'd you decide not to use it?

Fuel system king crew member #1

Well, it was a good deal and an inpulse buy. I could make it work, I'd need a FULLY built motor and tranny. This thing is serious, I'd be in Chris Miller's class with this. I still don't even have a spare motor lol, so I'm just gonna sell it and get gears with it. Much more useful

[Bottled Morphine]

Yeah I hear that, I Need gears and a spare motor. #sispeedracingsponsored hook me up!

Fuel system king crew member #1

[Si Speed 317]

Yeah I hear that, I Need gears and a spare motor. #sispeedracingsponsored hook me up!

Fuel system king crew member #1

I need that myself! Although the new boostedk20 store is coming out soon, saw the ig/fb post today. Anyone else see it?

[Bottled Morphine]

Yeah I saw it too, I'm very curious what's going to be available.

Fuel system king crew member #1

[aLmk]

Yeah I hear that, I Need gears and a spare motor. #sispeedracingsponsored hook me up!

Fuel system king crew member #1
I have a base rsx 5 speed if you want it, no fd, just gears and shafts.

[Bottled Morphine]

I have a base rsx 5 speed if you want it, no fd, just gears and shafts.

Meant like a ppgs or frana's. Thanks though! I'll keep you in mind when I inevitably break.

Fuel system king crew member #1

[Si Speed 317]

Meant like a ppgs or frana's. Thanks though! I'll keep you in mind when I inevitably break.

Fuel system king crew member #1

Franas are NUTS!

[monjarassi]

My GT42RS Lamp:

http://img.tapatalk.com/d/13/10/19/2yjy6uhu.jpg

http://img.tapatalk.com/d/13/10/19/y6edu6a4.jpg

LED FTW
http://img.tapatalk.com/d/13/10/19/ety6yqys.jpg

:beersmile::fyea: