View Full Version : Other than takata... what harness would/do you rock?
*not sure if correct section, move if needed*
So I need to get rid of the no name knock off harness I have and get something new and named. Other than the extremely ridiculously over priced Takata harnesses... what harnesses would you recommend for me? Also, what color scheme do you think I should go with? I'm thinking just keep it clean and stick with black.
My interior
http://farm7.static.flickr.com/6045/6274036098_d8318449d4_o.jpg
vdubkilla
10-27-2011, 12:02 AM
I run g-Force harnesses and have the same seats but in black ! G-Force harnesses are sfi approved ,well priced , and decent quality .
Si Speed 317
10-27-2011, 11:25 AM
I know nothing about harnesses, except that they have to be hooked up a certain way to work properly/safely. Love the look of them though. Don't you guys get a SRS light when you don't use the OEM clip?
I run g-Force harnesses and have the same seats but in black ! G-Force harnesses are sfi approved ,well priced , and decent quality .
G-Force is the exact company I was looking at since my local machine shop carries their products :thumb:
vdubkilla
10-28-2011, 09:40 AM
Check out Summit Racing and Jegs for the best pricing
monjarassi
10-28-2011, 11:51 AM
im running the sabelt 4 point harness black with yelloy letters.. and a buckle in the middle for quicker release
my two companies I narrowed it down to are R.J.S and G-Force. My local shop ordered in both sets for me to look at and compare. Pricing are extremely close for both so it's a matter of style now. Both are 6 point wrap around with quick cam lock
Si Speed 317
10-31-2011, 01:27 PM
I know nothing about harnesses, except that they have to be hooked up a certain way to work properly/safely. Love the look of them though. Don't you guys get a SRS light when you don't use the OEM clip?
:wavey:
So I decided to do the upgrade... then again what's new :)
So I decided the fakatas had to go! Here is what I had
http://i918.photobucket.com/albums/ad22/typespaz/gforce%20harness/100_7710.jpg
and here is the back where I had it crossed incorrectly cause at the time I didn't know what I was doing lol
http://i918.photobucket.com/albums/ad22/typespaz/gforce%20harness/100_7711.jpg
But now I have FIA/SFI approved harnesses from G-Force
http://i918.photobucket.com/albums/ad22/typespaz/gforce%20harness/100_7707.jpg
The quality on these things are absolutely amazing. So much better, thicker, stronger and nicer than my knockoffs.
http://i918.photobucket.com/albums/ad22/typespaz/gforce%20harness/100_7722.jpg
Installed
http://i918.photobucket.com/albums/ad22/typespaz/gforce%20harness/100_7718.jpg
and the rear wrapped properly
http://i918.photobucket.com/albums/ad22/typespaz/gforce%20harness/100_7719.jpg
http://i918.photobucket.com/albums/ad22/typespaz/gforce%20harness/100_7720.jpg
Si Speed 317
11-07-2011, 01:04 AM
Damn I just saw this now - baller man. Looks great! I would have made the B-Pillar bar Red or Black though.
Damn I just saw this now - baller man. Looks great! I would have made the B-Pillar bar Red or Black though.
actually thats on my list. I'm thinking silver.
Si Speed 317
11-08-2011, 12:49 AM
Hmm, silver is a good idea too. Didn't think of that. Way to think outside the car :spazapproved:
yeah I plan on getting them painted while they repaint my hood and fenders. I thought it would be a nice touch to bring some of the outside in.
Si Speed 317
11-09-2011, 11:31 AM
Definitely a good point - kill two birds with one stone. Why are you getting your hood and fenders repainted?
Definitely a good point - kill two birds with one stone. Why are you getting your hood and fenders repainted?
The hood has a major dent in it do to a racing accident... true story:
While on a full pull drag racing the belt snapped and hit the hood so hard it dented it. So I'm having the dent removed and while I'm at it I am shaving the windshield washer nozzles for a cleaner look. My painter said that silver is a hard color to match so he wants to fade the fenders while we're at it. Plus the hood has A LOT of chips from the previous owner....
k20buildinprogress
05-21-2012, 06:31 PM
i know this is old but if anyone else is looking for harness's status makes some really nice ones.. gforces look good tho :thumb:
Status was my other option I was going to go with. But the local machine/speed shop is a supplier of gforce and they give me great deals.
PetefromtheStreets
05-22-2012, 02:59 PM
I run G-force pro series camloks. Nice belts for sure
02civic629
03-07-2014, 02:15 PM
CROW Harnesses..... Latch and lock old school, don't trust that camlock crap lol
vdubkilla
03-07-2014, 02:26 PM
I agree with petestreets the g force harnesses with cam locks are nice.I run them in my car and am very happy with them .They are reasonably priced as well .
Sent from my ADR6300 using Tapatalk 2
PetefromtheStreets
03-07-2014, 02:38 PM
CROW Harnesses..... Latch and lock old school, don't trust that camlock crap lol
I have yet to encounter a problem with mine and they are quite secure. I've got the 5 point harnesses and let me tell you that 5th point is uncomfortable. Lol
s4 IG-petefromthestreets
Cage plus radio member #1
02civic629
03-07-2014, 02:41 PM
I have yet to encounter a problem with mine and they are quite secure. I've got the 5 point harnesses and let me tell you that 5th point is uncomfortable. Lol
s4 IG-petefromthestreets
Cage plus radio member #1
Yea i'm sure chances of ever having a problem are slim to none, but if my life is on the line ill use the latch ones that cant fail lol
Yea i've got the 5-pt CROW ones, i feel your pain lol
Frostydc5
03-07-2014, 03:31 PM
CROW Harnesses..... Latch and lock old school, don't trust that camlock crap lol
CROW harness crew :cheers: and i kept it old school too lol latch and link but mine are the black bird edition with the black hardware.
btw how are you running your 5th belt on the stock seats?
ryaano18
03-07-2014, 03:33 PM
Status 4point harness here, couldn't afford 5point
vdubkilla
03-07-2014, 03:46 PM
I have yet to encounter a problem with mine and they are quite secure. I've got the 5 point harnesses and let me tell you that 5th point is uncomfortable. Lol
s4 IG-petefromthestreets
Cage plus radio member #1
I've never had an issue with mine either and that 5 th point is a bitch haha mine just runs up the center of the front of the seat for now .If I ever get serious about drag racing the car I'd probably put a kirkey seat in the car .
PetefromtheStreets
03-07-2014, 03:46 PM
I've never had an issue with mine either and that 5 th point is a bitch haha mine just runs up the center of the front of the seat for now .If I ever get serious about drag racing the car I'd probably put a kirkey seat in the car .
Kirkey crew member #1 here. Lol
s4 IG-petefromthestreets
Cage plus radio member #1
02civic629
03-07-2014, 03:47 PM
CROW harness crew :cheers: and i kept it old school too lol latch and link but mine are the black bird edition with the black hardware.
btw how are you running your 5th belt on the stock seats?
Jelly of black edition lol, but when you have no carpet or sound deadening in the floor you just take a drill to the floor :rotfl:
Frostydc5
03-07-2014, 03:48 PM
CROW Harnesses..... Latch and lock old school, don't trust that camlock crap lol
Jelly of black edition lol, but when you have no carpet or sound deadening in the floor you just take a drill to the floor :rotfl:
i know that lol i drilled thru my floor too and put an eye bolt in it i mean are you just running it up in front of the oem seat? thats gotta be super uncomfortable lol
purple with back bird hardware lol
vdubkilla
03-07-2014, 03:49 PM
Kirkey crew member #1 here. Lol
s4 IG-petefromthestreets
Cage plus radio member #1
I'm running a heavy ass set of Recaros haha I weighed them and they are 55 lbs each with the rails attached .
PetefromtheStreets
03-07-2014, 03:51 PM
I'm running a heavy ass set of Recaros haha I weighed them and they are 55 lbs each with the rails attached .
Ouch. My 1 seat weights around 20lbs with cover, and brackets.
s4 IG-petefromthestreets
Cage plus radio member #1
Frostydc5
03-07-2014, 03:52 PM
Ouch. My 1 seat weights around 20lbs with cover, and brackets.
s4 IG-petefromthestreets
Cage plus radio member #1
my seats are 20 lbs with no bracket or slider tho :(
PetefromtheStreets
03-07-2014, 03:52 PM
my seats are 20 lbs with no bracket or slider tho :(
Lol @ your RACEKAR seat!
s4 IG-petefromthestreets
Cage plus radio member #1
Frostydc5
03-07-2014, 03:54 PM
Lol @ your RACEKAR seat!
s4 IG-petefromthestreets
Cage plus radio member #1
its comfy tho lol #showcarnation
vdubkilla
03-07-2014, 03:55 PM
Ouch. My 1 seat weights around 20lbs with cover, and brackets.
s4 IG-petefromthestreets
Cage plus radio member #1
Like I said I would replace them if it were a serious race car but it's a street car and the Recaros are comfortable and really keep ya in the seat for "spirited "driving :vtec:
Frostydc5
03-07-2014, 03:56 PM
Like I said I would replace them if it were a serious race car but it's a street car and the Recaros are comfortable and really keep ya in the seat for "spirited "driving :vtec:
same exact reason i didnt go kirkey i dont want to DD with that shit lol
PetefromtheStreets
03-07-2014, 03:58 PM
The kirkey really isn't bad tho. Just address lumbar pad and your good! Seriously tho.
s4 IG-petefromthestreets
Cage plus radio member #1
Frostydc5
03-07-2014, 04:10 PM
The kirkey really isn't bad tho. Just address lumbar pad and your good! Seriously tho.
s4 IG-petefromthestreets
Cage plus radio member #1
true that lol
02civic629
03-07-2014, 04:21 PM
i know that lol i drilled thru my floor too and put an eye bolt in it i mean are you just running it up in front of the oem seat? thats gotta be super uncomfortable lol
purple with back bird hardware lol
Yea i run it over the front, i don't man tighten it though unless i wont be having kids ever :rotfl:
Ouch. My 1 seat weights around 20lbs with cover, and brackets.
s4 IG-petefromthestreets
Cage plus radio member #1
Damn i need your seats, im just running gutted stock shits lol
Frostydc5
03-07-2014, 04:37 PM
Yea i run it over the front, i don't man tighten it though unless i wont be having kids ever :rotfl:
Damn i need your seats, im just running gutted stock shits lol
throw your sparco in there i know its gotta be light too
02civic629
03-07-2014, 05:01 PM
throw your sparco in there i know its gotta be light too
To poor buying stupid k-tuned parts lol. I shoulda got damn rails and sliders before a shifter :rotfl:
Frostydc5
03-07-2014, 05:03 PM
To poor buying stupid k-tuned parts lol. I shoulda got damn rails and sliders before a shifter :rotfl:
you finally give in and buy it? you get the new one or the original model? new or used? i love hearing about people who join the K-Tuned parts club lol
PetefromtheStreets
03-07-2014, 05:10 PM
Ktuned crew number 1!
s4 IG-petefromthestreets
Cage plus radio member #1
02civic629
03-07-2014, 05:12 PM
you finally give in and buy it? you get the new one or the original model? new or used? i love hearing about people who join the K-Tuned parts club lol
Yea imma go ahead and get it this week when i get my money together (got some other k-tuned parts coming in today actually -__-). Just a new original model one. I talked to your guy Mike at k-tuned for a long time about it and he recommended I stick with the older one just due to the fact that my PPG's aren't dogbox and the car sees auto-x and road course witch isnt too hard on the shifter. He said if i drag raced or had a dogbox to get the newer one.
vdubkilla
03-07-2014, 05:13 PM
I need to order one myself but I like the oem rsx box and are they $400 now for the k tuned shifter ?
02civic629
03-07-2014, 05:16 PM
I need to order one myself but I like the oem rsx box and are they $400 now for the k tuned shifter ?
Someone likes loose vagina shifts :rotfl:
vdubkilla
03-07-2014, 05:28 PM
Someone likes loose vagina shifts :rotfl:
No actually I like tight vaginas and oem boxes ! I had a hybrid box a few years ago but didn't care for it and just haven't really had issue with the rsx box and hybrid cables .
Frostydc5
03-07-2014, 05:38 PM
Yea imma go ahead and get it this week when i get my money together (got some other k-tuned parts coming in today actually -__-). Just a new original model one. I talked to your guy Mike at k-tuned for a long time about it and he recommended I stick with the older one just due to the fact that my PPG's aren't dogbox and the car sees auto-x and road course witch isnt too hard on the shifter. He said if i drag raced or had a dogbox to get the newer one.
thats pretty much what i told you its for the dog box guys and drag racers, and shit you can always get the upgrade ater if you decide you want it
02civic629
03-07-2014, 06:26 PM
No actually I like tight vaginas and oem boxes ! I had a hybrid box a few years ago but didn't care for it and just haven't really had issue with the rsx box and hybrid cables .
My oem box was looser than a white girl after she leaves a black guy hahaha. In like each gear you had about 2 inches of play side to side :rotfl:
thats pretty much what i told you its for the dog box guys and drag racers, and shit you can always get the upgrade ater if you decide you want it
Im not upgrading anytime soon from that once i get it. I really don't even wanna buy this k-tuned shifter but after pure abuse for 2 years this buddy club served it purpose for only 100 bucks :thumb:
Frostydc5
03-07-2014, 06:30 PM
My oem box was looser than a white girl after she leaves a black guy hahaha. In like each gear you had about 2 inches of play side to side :rotfl:
Im not upgrading anytime soon from that once i get it. I really don't even wanna buy this k-tuned shifter but after pure abuse for 2 years this buddy club served it purpose for only 100 bucks :thumb:
its about time you see the light
Powered by vBulletin® Version 4.2.5 Copyright © 2024 vBulletin Solutions Inc. All rights reserved.