PDA

View Full Version : K20Tuned DC4 K24 615HP



K20Tuned
09-06-2011, 12:12 PM
Bought this integra back in 2006 for $800.00
Now how much I have put into it.... ahhhh, rather no think about it, lol!
http://www.k20tuned.com/boosted/1.jpg

K24A4 Block stock 87mm sleeves rebuild
Wiseco 10:1 Pistons, BluePrint Racing H Rods and ACL Bearing Kit
http://www.k20tuned.com/boosted/3.jpg
http://www.k20tuned.com/boosted/4.jpg

Turbo Kit I put together myself....
Fab-Worx Manifold, Precision T67 Journal Turbo, TiAL WG and BOV
http://www.k20tuned.com/boosted/5.jpg
http://www.k20tuned.com/boosted/6.jpg

RSX 6 Speed trans, I installed DC5 OEM LSD
http://www.k20tuned.com/boosted/7.jpg

Installed and ready to breakin motor...
http://www.k20tuned.com/boosted/9.jpg
http://www.k20tuned.com/boosted/10.jpg
http://www.k20tuned.com/boosted/12.jpg

Breakin completed and compression test looked nice...
Now time to turn up the Boost!
http://www.k20tuned.com/boosted/14.jpg
http://www.k20tuned.com/boosted/13.jpg

Here are the numbers... 322HP@10psi, 427HP@14psi, 538HP@20psi and 615HP@24psi

Click link for youtube vid...
http://www.youtube.com/watch?v=moRJo-x3Okk

E85power
09-06-2011, 12:18 PM
Where is the new rotrex setup?

K20Tuned
09-06-2011, 12:44 PM
Rotrex kit was sold

boosted_teg
09-08-2011, 01:44 AM
Crazy 4 psi went from 538 to 615.

What gas are you running?

Spoolin_VTEC
09-08-2011, 11:40 AM
Sick progress, $800 was just a shell right? As Teg said, what fuel?

K20Tuned
09-11-2011, 10:17 AM
Boost_Teg yeh it was amazing!!!
538HP@20psi 93 oct pump and 615HP@24psi tune was on race gas, unleaded VP103.

Si Speed 317
09-11-2011, 11:25 AM
^ I figured it was on race gas. HUGE jump from just 4psi, lol. Great numbers though :thumb:

420Coupe
09-11-2011, 11:55 AM
:drooling: ****ing AMAZINNGGGG let me know how that TURBO does ! Precision Fan here! and that bish is HUGE!

boosted_teg
09-11-2011, 08:13 PM
i need some good 93 pump fuel here!

Spoolin_VTEC
09-12-2011, 01:23 PM
Another awesome integra :thumb: We should have a ROTM for best overall integra :spaz:

chef andre
10-19-2011, 01:17 AM
Bump for a local. Looking forward to the new motor setup!!!!

Spaz
10-19-2011, 04:49 PM
wow that is a sick engine build and amazing numbers!!! Makes me wish I would have kept my DC2 and built/swapped that!

Si Speed 317
10-20-2011, 01:12 PM
Love this car, is K20Tuned still on here though? Hasn't posted in a while..

K20Tuned
11-02-2011, 07:53 PM
Busy with work guys, hence the absence... LOL
Here is an update of the new build: 89mm bore x 101.6mm stroke = 2528cc

http://3.bp.blogspot.com/-YUpzC5oU8Bc/Toz6GJ3OO0I/AAAAAAAAAGU/zyl7WeaSNco/s1600/SL740141.JPG
http://4.bp.blogspot.com/-_8GBO8ATAm0/Toz6F0SifFI/AAAAAAAAAGQ/m7fENS5ZJeo/s1600/SL740138.JPG
http://2.bp.blogspot.com/-J7atAPQq-pY/TpY9xUZDXjI/AAAAAAAAAGg/DPgyN27Afxo/s1600/trans.jpg
http://www.k20tuned.com/images/installed1.jpg

Spaz
11-02-2011, 08:44 PM
What is your transmission setup?

Spoolin_VTEC
11-03-2011, 12:22 AM
Damn, that's awesome! And Spaz, I think it's OEM tranny with TSX 6th, and OEM LSD.

K20Tuned
11-03-2011, 06:20 AM
yep spoolin is correct about the transmission. I may swap 2nd gear out for a tsx later if ratio is too close.

Spoolin_VTEC
11-03-2011, 10:08 AM
:woohoo: K20Tuned, are you becoming a sponsor? Because that's a hell of a company car lol

K20Tuned
11-03-2011, 07:48 PM
:woohoo: K20Tuned, are you becoming a sponsor? Because that's a hell of a company car lol

I would not mind becoming a sponsor on the forum, but still in negotiation phase with admin.

Spaz
11-03-2011, 09:32 PM
I'm surprised about the trans. Hopefully better luck than me!

vdubkilla
11-03-2011, 10:30 PM
Is this the same " K20tuned " also known as Dale that so many people on K20A.org have had problems with ?? http://www.k20a.org/forum/showthread.php?t=84744

K20Tuned
11-11-2011, 01:17 AM
Thanks everyone for the comments, will keep you all posted.

PetefromtheStreets
11-11-2011, 02:54 PM
Sick car for sure. And I'm sorry to hear about your past misfortunes. I have no opinion on the matter. I've never done business with you guys but i hope all works out for you.