PDA

View Full Version : My Intro AKA Str8JDM 10 sec Honda Day Build



Str8JDM
07-07-2011, 05:56 PM
Current Setup: 08 Civic Si Sedan, Stock Motor, Full Race turbo kit, Precision BB5857

I had the plan months ago to rebuild my motor. i bought almost all the stuff and then summer came a long and i wanted a bike so bad. so i sold mostly all my stuff to buy a bike and didnt really care too much bout the civic anymore. it was running and getting me where i had to go.

until last sunday. my dumb @$$ decides to do a 2nd gear still burnout and my poor car said it had enough. clutch doesnt engage anymore, car doesnt go into any gear, fml.

so if the tranny has to come out, minus well take the motor out with it and continue with the build!

Honda Day is at Englishtown, NJ on August 13-14th. planning to have the build done and the car slicked up to run.

New Setup is coming hard!

Engine:
K20Z1 Block, OEM Sleeves
86.5mm Wiseco 9.8:1 pistons
Eagle HBeam Rods
ARP Rod Bolts
ACL Race bearings
OEM 86mm Headgasket
ARP Head Studs
K20A2/Z1 oil setup
K20Z3 Head, stock casting
Ferrea 6000 series std size dish valves
Supertech 100psi Duel Valve Springs
Supertech Titanium Retainers
IPS KT1 Cams
Innovative 85A Motor Mounts

Transmission:
Jotech Stage 2 Transmission
Competition "Stage 5" 4 puck sprung clutch
OEM Flywheel
OEM Axles

Forced Induction:
Full Race Turbo Kit
Precision 6262SP, .82 Vband Hotside, .70 ported cold side
Precision 46mm Wastegate
Tial Candy Purple Blow off Valve to match Valve Cover, relocated to the current location on the IC pipes
Full Race 3" Exhaust

Fuel System:
DW 300lph Fuel Pump
Fuel return kit (-8 feed, -6 return)
All black Cloth Braided Fuel Lines
FueLab Fuel Filter
FueLab Fuel Pressure regulator
Golden Eagle Fuel Rail with Gauge
Fuel Injector Clinic 1000cc Injectors

Suspension and Brakes:
BC Racing Coilovers (8k front, 10k rear)
Rear SPC camber kit
Purple Beaks Bar
Hawk HPS Front and Rear Brake Pads
Brembo Blank Front Rotors
Goodridge Front and Rear Steel Brake lines
ARP front Extended Wheel Studs
Blackworks Racing Purple Extended Lug Nuts
Team Dynamics 15x7 +35 Rims
MH 24x8 Slicks

Pics will start popping up in the next couple of days, maybe some later. Here we go!

Str8JDM
07-07-2011, 05:56 PM
THIS POST WILL INCLUDE ALL THE MOTOR BUILD PROCESS AND PARTS


K20Z1 block stripped and ready for the machine shop
http://img718.imageshack.us/img718/5598/img0181ph.jpg
http://img853.imageshack.us/img853/5769/img0180zz.jpg
http://img820.imageshack.us/img820/5553/img0183wy.jpg

K20Z3 head stripped and ready for the machine shop (picked up a head that only had 800 miles on it!)
http://img813.imageshack.us/img813/7241/img0184vu.jpg
http://img706.imageshack.us/img706/2323/img0187mm.jpg
http://img684.imageshack.us/img684/1812/img0186dg.jpg

Crank back from machine shop all boiled clean and polished
http://img706.imageshack.us/img706/8826/img0146mh.jpg
http://img135.imageshack.us/img135/3328/img0147uh.jpg

ARP Head Studs, wouldnt trust anything else
http://img823.imageshack.us/img823/91/img0028jhi.jpg

Deatschwerks 300LPH pump, Walbro so last year..
http://img845.imageshack.us/img845/9703/img0202dc.jpg

Wiseco 86.5mm pistons, 9.8:1 compression, Eagle H-Beam Rods, Upgraded Wrist pins
http://img814.imageshack.us/img814/9386/img0204fo.jpg
http://img714.imageshack.us/img714/52/img0209cl.jpg

Left: Standard Wrist Pin
Right: Heavy Duty Upgraded Wrist Pin
http://img197.imageshack.us/img197/8431/img0210g.jpg

ACL RACE Bearings
http://img807.imageshack.us/img807/4657/img0212b.jpg

block back from machine shop ready to go!
http://img10.imageshack.us/img10/5962/img0214fc.jpg
http://img155.imageshack.us/img155/467/img0215hx.jpg

IPS KT1 Cams, Accord Type R Exhaust Gear
http://img268.imageshack.us/img268/9873/img0438xk.jpg

http://img39.imageshack.us/img39/2546/img0439ve.jpg

Head back from the machine shop, all new guides, seals, and a mill job
http://img52.imageshack.us/img52/4502/img0249of.jpg
http://img204.imageshack.us/img204/939/img0250cm.jpg
http://img69.imageshack.us/img69/262/img0251m.jpg

Competition Stage 5 Clutch
http://img215.imageshack.us/img215/7200/img0252gw.jpg

Fuel System ready to rock (look for a fuel return DIY in about a week)
http://img850.imageshack.us/img850/2082/img0275cz.jpg

Injectors came back from Fuel Injector Clinic, they were flow tested and cleaned, mint...
http://img405.imageshack.us/img405/3806/img0274ie.jpg

Innovative 75A Motor Mounts
http://img204.imageshack.us/img204/6696/img0277yy.jpg

EM1 CMC with Hybrid Racing Clutch Line
http://img717.imageshack.us/img717/4276/img0276hj.jpg

Manifold With TSX Throttle Body
http://img5.imageshack.us/img5/6210/img0281me.jpg

Precision 6262S CEA
http://img33.imageshack.us/img33/999/securedownload1po.jpg
http://img12.imageshack.us/img12/4760/securedownload2r.jpg

Bottom End Built, ready to rock
http://img834.imageshack.us/img834/3398/img0278fp.jpg
http://img585.imageshack.us/img585/7029/img0279m.jpg
http://img856.imageshack.us/img856/1541/img0280ji.jpg

http://img265.imageshack.us/img265/5762/img0339xg.jpg
http://img829.imageshack.us/img829/8114/img0340uz.jpg
http://img337.imageshack.us/img337/2403/img0337kq.jpg
http://img100.imageshack.us/img100/9969/img0341aw.jpg
http://img31.imageshack.us/img31/8626/img0336qw.jpg
http://img198.imageshack.us/img198/4141/img0343nm.jpg
http://img690.imageshack.us/img690/3342/img0344zj.jpg
http://img846.imageshack.us/img846/1996/img0345ur.jpg

fuel cage all done, dw300 to -8 feed, -6 return
http://img706.imageshack.us/img706/6564/img0346gv.jpg
http://img27.imageshack.us/img27/8337/img0347uih.jpg
http://img404.imageshack.us/img404/1417/img0348qx.jpg
http://img846.imageshack.us/img846/5899/img0349qd.jpg
http://img707.imageshack.us/img707/3245/img0350hs.jpg
http://img97.imageshack.us/img97/71/img0351ka.jpg

Blow off valve location moved...
http://img824.imageshack.us/img824/4146/img0362cf.jpg

Valve cover with -10 ports welded in for catch can...
http://img822.imageshack.us/img822/4849/img0364qo.jpg

Candy Purple Powercoat!!
http://img546.imageshack.us/img546/2600/img0365b.jpg

BC Coilovers 8k/10k, Beaks Bar, 8mm Spacers for Slicks
http://img844.imageshack.us/img844/8062/img0433tx.jpg

Str8JDM
07-07-2011, 05:57 PM
THIS POST WILL INCLUDE THE WHOLE SWAP PROCESS AND DIRTY WORK ON THE CAR

What the car currently looks like before whole transformation
http://img546.imageshack.us/img546/258/img0199h.jpg
http://img820.imageshack.us/img820/69/img0198tq.jpg
http://img163.imageshack.us/img163/4381/img0200cc.jpg
http://img851.imageshack.us/img851/9231/img0196u.jpg
http://img204.imageshack.us/img204/6307/img0197hs.jpg

Marking off the new blow off location with the new purple Tial. Thanks Full Race for changing up the design and leaving us with the crap design of the blow off hitting the radiator
http://img10.imageshack.us/img10/7605/img0201yn.jpg

8/18/11: Motor Ready to be pulled out!
http://img52.imageshack.us/img52/8933/img0255sw.jpg
http://img829.imageshack.us/img829/8281/img0254ap.jpg

9/1/11: Motor Finally out the Car
http://img32.imageshack.us/img32/8967/securedownloadzi.jpg
http://img854.imageshack.us/img854/3568/img0265ge.jpg
http://img840.imageshack.us/img840/4280/img0266it.jpg


12/10/11: Almost there
That Gold wrap sucks! upgraded and protected...
http://img685.imageshack.us/img685/8586/30905426363239880811254.jpg

EM1 CMC upgrade..
http://img593.imageshack.us/img593/124/img0356bd.jpg
http://img35.imageshack.us/img35/1507/img0360zj.jpg

Innovative 85A, cant wait to sit in a vibrator...
http://img542.imageshack.us/img542/5274/img0353np.jpg
http://img705.imageshack.us/img705/3/img0354gg.jpg

Turbo Stuff going back in...
http://img191.imageshack.us/img191/8506/img0352h.jpg
http://img850.imageshack.us/img850/3109/img0357pl.jpg
http://img840.imageshack.us/img840/9947/img0358u.jpg
http://img824.imageshack.us/img824/9269/img0359x.jpg

http://img811.imageshack.us/img811/5492/img0361k.jpg

1/11/12: First Start Up!!!!
RkoXaj6Y4UA

1/19/12: Fresh Engine Bay
http://img440.imageshack.us/img440/5707/img0400n.jpg
http://img214.imageshack.us/img214/3168/img0401vy.jpg
http://img859.imageshack.us/img859/2688/img0402u.jpg
http://img193.imageshack.us/img193/8351/img0403ad.jpg
http://img593.imageshack.us/img593/787/img0404bt.jpg

06_typeS
07-07-2011, 07:00 PM
Nice, pics or car??

PetefromtheStreets
07-09-2011, 12:50 AM
That's allot of money to spend In just over a month. Best of luck to you. I may see you in e town.

Si Speed 317
07-09-2011, 04:16 PM
Sick setup, great build. Car is fast as balls as it is, he's a local boost buddy of mine :welcome: Do I see an Adm_rsx vs Str8JDM match on Honda Day? :spaz:

420Coupe
07-09-2011, 05:27 PM
Do it!

Str8JDM
07-09-2011, 05:43 PM
That's allot of money to spend In just over a month. Best of luck to you. I may see you in e town.

im not worried bout money. half the stuff is already there. ill be in 11.5 index but im planning on getting kicked out for no cage and breaking into 10s...


Sick setup, great build. Car is fast as balls as it is, he's a local boost buddy of mine :welcome: Do I see an Adm_rsx vs Str8JDM match on Honda Day? :spaz:

thank you sir, i cant wait

PetefromtheStreets
07-09-2011, 06:35 PM
That's cool with me. I'm in it for the sport and competition. I we line up that would be fun. I should be in that same class. And I too plan on getting kicked out. Lol. Best of luck to you to get her finished in time. Keep us updated.

PetefromtheStreets
07-12-2011, 01:57 PM
Any updates??

Str8JDM
07-12-2011, 04:59 PM
stuff is at machine shop

PetefromtheStreets
07-12-2011, 06:24 PM
Great. Keep us posted. I'm interested to see this thing done.

Str8JDM
07-15-2011, 05:53 PM
updated post 3 with pics. you can see how i separated post 2 into parts and motor build and post 3 to the actual dirty work on the car..

when the car is fully done it will be transformed and not even look like the same car

fre$h si
07-19-2011, 01:59 AM
Sick setup, great build. Car is fast as balls as it is, he's a local boost buddy of mine :welcome: Do I see an Adm_rsx vs Str8JDM match this weekend? :spaz:

fixed ;)

Str8JDM
04-17-2012, 07:06 PM
wow its been a while, but finally updated my first couple of posts! enjoy!

Si Speed 317
04-17-2012, 08:03 PM
Awesome update, can't wait for race gas numbers and world record breakers!