PDA

View Full Version : aem wideband vs Kpro built in wideband



boosted_teg
06-19-2011, 12:28 AM
So i've been tuning my car lately and ive come into a little complication. I have the stock rsx type s wideband reading and trimming fuel, but i also have my AEM wideband dataloguing my fuel for boost.

I removed resistors c300 and c301 to get the eld voltage readings to read below 1.7v from the AEM.

Now, everything runs fine. But tonight my aem in boost =10.7-11.0 while the rsx one will read 12-13s. Thats quite the difference in between both sensors.

This is all being done on 0 cam angle and up to 4.1 psi to get the fuel curves down.


which to trust?

:FUU:

Si Speed 317
06-19-2011, 12:47 PM
Hmm, the one thing I know is that if you add 5-10% to your fuel tables and re-datalog, your OEM wideband should adjust. If it does, I would trust that one. If it doesn't, I would trust the AEM wideband and replace your OEM one. That's how I found out my OEM wideband was bad

boosted_teg
06-19-2011, 06:40 PM
they both adjust with added fuel. AEM is brand new, the OEM is year old