PDA

View Full Version : 340hp Rotrex EP3 FD?



gparker85
03-28-2016, 12:30 PM
http://uploads.tapatalk-cdn.com/20160328/e4de5cf357ff184c6113de3fec11a9ff.jpg

What FD would you recommend with this setup?

Running a standard EP3 box (4.7fd) with a mfactory helical diff.

I'm getting alot of spin in 1st and 2nd running AD08R's

Sent from my HTC One_M8 using Tapatalk

BoostedK20
03-29-2016, 10:52 AM
Possibly a 4.3 FD. PetefromtheStreets is great at transmission, he will chime in.

Post a build thread!

PetefromtheStreets
03-29-2016, 11:03 AM
Possibly a 4.3 FD. PetefromtheStreets is great at transmission, he will chime in.

Post a build thread!

Thank you for the kind words man.


What is the car being used for? Just a daily driver? Track car or drag racing?

For a track car or a daily I'd stick with what you've got. Quicker acceleration

Personally if you're only spinning 1st and second I'd leave it be. There are things you can do with the blower to lower boost in those gears if you prefer.

Jaydee used a tial wastegate and welded it to the charge piping and used it to reduce boost to help with traction. This may be a more effective route for you to explore.

BoostedK20
04-06-2016, 10:53 AM
Thank you for the kind words man.


What is the car being used for? Just a daily driver? Track car or drag racing?

For a track car or a daily I'd stick with what you've got. Quicker acceleration

Personally if you're only spinning 1st and second I'd leave it be. There are things you can do with the blower to lower boost in those gears if you prefer.

Jaydee used a tial wastegate and welded it to the charge piping and used it to reduce boost to help with traction. This may be a more effective route for you to explore.
gparker85 Did you see this post?