PDA

View Full Version : Another Turbo Ep3... :)



Sheaperk
02-25-2016, 12:53 AM
02 Ep3

Engine
T1 Spec Long block built by Watts Shop
JE assymetrical pistons 10:1
GE sleeves
Manley turbo tuff rods
87.5mm K20 - 4Piston oil pump
Ferrea valves, Supertech springs & Guides
Prayoonto shim kit 120lb rate
Pray2 cams w/45* limited Cam Gear
S2 ultra Intake Mani.
Ktuned 90tb


Fuel system
Full blown hanger w/ 2 - walbro hp255's
-8feed -6return
Fore Innovations Regulator
Fuellab 6 micron inline filter
ID2000 injectors
Ethanol


Turbo setup
AFI t4 sidewinder manifold
Tial 60 gate
Precision t4 6266 .96ar
Sheepey 800hp intercooler
Tial 50 bov


Trans
Ep3 5 spd
Gear X 1st-4th (k20 drag kit) w/ gear-x 4.058 fd
Mfactory LSD
Competition Twin Disc
Insane Shafts 1000hp axles


Kpro v4
Plx wideband
Hondata Traction control
Zeitronix - Ethanol content analyzer
UK instrument cluster
And kept Air Conditioning 😎



Should make it on the dyno pretty soon, just sent it off for exhaust and charge pipes. Then all ready for dyno :)

http://uploads.tapatalk-cdn.com/20160225/2cec83e0590440d9866dbb6b1dc5cc4c.jpg
http://uploads.tapatalk-cdn.com/20160225/afc40cce0d9dfe5d90a7e40f753542f9.jpg
http://uploads.tapatalk-cdn.com/20160225/0176d0250011073811f46fbac1748d7a.jpghttp://uploads.tapatalk-cdn.com/20160225/82675d096dc88bd69c0a221c581cb1c0.jpghttp://uploads.tapatalk-cdn.com/20160225/fec96edeffa5460124621cef087fdaed.jpg
http://uploads.tapatalk-cdn.com/20160225/80e7299c08e614453e1fa676b26578c6.jpg
http://uploads.tapatalk-cdn.com/20160225/c044d1999271cd090d465676b5a9c5a7.jpg
http://uploads.tapatalk-cdn.com/20160225/342cfe76aea3ec6b51bf54268e03b28f.jpg
http://uploads.tapatalk-cdn.com/20160225/4fdcfe32a0cbc34e6f7de8f81bdd30c7.jpg
http://uploads.tapatalk-cdn.com/20160225/da2f1cab1bc2bbf1d06e8b912616cebc.jpg
http://uploads.tapatalk-cdn.com/20160225/b12569d32171631af9388f2b3d4ea59c.jpg
http://uploads.tapatalk-cdn.com/20160225/a3eed9acb105f348b5c164fe3362085d.jpg
http://uploads.tapatalk-cdn.com/20160225/535acc9a0d8bea717448d0a9f67f6d38.jpghttp://uploads.tapatalk-cdn.com/20160225/eb86c20ad817c3226da4c65e31f878c4.jpg


Sent from my iPhone using Tapatalk

mnc1408
02-25-2016, 11:22 AM
very very nice!!!

K20JuJu
02-26-2016, 12:34 PM
02 Ep3

Engine
T1 Spec Long block built by Watts Shop
JE assymetrical pistons 10:1
GE sleeves
Manley turbo tuff rods
87.5mm K20 - 4Piston oil pump
Ferrea valves, Supertech springs & Guides
Prayoonto shim kit 120lb rate
Pray2 cams w/45* limited Cam Gear
S2 ultra Intake Mani.
Ktuned 90tb


Fuel system
Full blown hanger w/ 2 - walbro hp255's
-8feed -6return
Fore Innovations Regulator
Fuellab 6 micron inline filter
ID2000 injectors
Ethanol


Turbo setup
AFI t4 sidewinder manifold
Tial 60 gate
Precision t4 6266 .96ar
Sheepey 800hp intercooler
Tial 50 bov


Trans
Ep3 5 spd
Gear X 1st-4th (k20 drag kit) w/ gear-x 4.058 fd
Mfactory LSD
Competition Twin Disc
Insane Shafts 1000hp axles


Kpro v4
Plx wideband
Hondata Traction control
Zeitronix - Ethanol content analyzer
UK instrument cluster
And kept Air Conditioning 😎



Should make it on the dyno pretty soon, just sent it off for exhaust and charge pipes. Then all ready for dyno :)

http://uploads.tapatalk-cdn.com/20160225/2cec83e0590440d9866dbb6b1dc5cc4c.jpg
http://uploads.tapatalk-cdn.com/20160225/afc40cce0d9dfe5d90a7e40f753542f9.jpg
http://uploads.tapatalk-cdn.com/20160225/0176d0250011073811f46fbac1748d7a.jpghttp://uploads.tapatalk-cdn.com/20160225/82675d096dc88bd69c0a221c581cb1c0.jpghttp://uploads.tapatalk-cdn.com/20160225/fec96edeffa5460124621cef087fdaed.jpg
http://uploads.tapatalk-cdn.com/20160225/80e7299c08e614453e1fa676b26578c6.jpg
http://uploads.tapatalk-cdn.com/20160225/c044d1999271cd090d465676b5a9c5a7.jpg
http://uploads.tapatalk-cdn.com/20160225/342cfe76aea3ec6b51bf54268e03b28f.jpg
http://uploads.tapatalk-cdn.com/20160225/4fdcfe32a0cbc34e6f7de8f81bdd30c7.jpg
http://uploads.tapatalk-cdn.com/20160225/da2f1cab1bc2bbf1d06e8b912616cebc.jpg
http://uploads.tapatalk-cdn.com/20160225/b12569d32171631af9388f2b3d4ea59c.jpg
http://uploads.tapatalk-cdn.com/20160225/a3eed9acb105f348b5c164fe3362085d.jpg
http://uploads.tapatalk-cdn.com/20160225/535acc9a0d8bea717448d0a9f67f6d38.jpghttp://uploads.tapatalk-cdn.com/20160225/eb86c20ad817c3226da4c65e31f878c4.jpg


Sent from my iPhone using Tapatalk

Awesome setup !! What power are you looking to get ??

Sheaperk
02-26-2016, 01:36 PM
~750ish


Instagram Sheaperk

Jonezy
03-05-2016, 08:27 AM
Looks good matey, going all out on my UK ep3 soon.

You got a pic of how your cooler looks with the bumper on? I had to chop away quite a lot of bumper on old cooler and new one is thicker.

Jonezy
03-05-2016, 08:28 AM
Also how and what have you mounted those gauges on

Sheaperk
03-05-2016, 10:05 AM
I havent got my new cooler on yet. But my last setup i had to cut quite a bit. http://uploads.tapatalk-cdn.com/20160305/9b94565eed1762ee0881802e6d194456.jpg

For the gauges; I just bought single gauge mounts and screwed them to the plastic steering column cover


Instagram Sheaperk

Jonezy
03-05-2016, 12:56 PM
That looks good! That keeps AC does it? You just go for regular turbo tuffs or with 625+ bolts?

Wish I had seen that oil pump last month too!

Sheaperk
03-06-2016, 12:47 AM
Yea. I kept ac.
And i have the turbo tuffs with arp bolts, and upgraded wrist pins.


Instagram Sheaperk

Jonezy
03-06-2016, 07:53 PM
Sounds good!

Thanks for taking the time to reply matey!

Guessing you didn't move the rad and AC rad back into the bay at all? Just made space behind the bumper I guess

Sheaperk
03-06-2016, 07:54 PM
No prob man!
Yea. Factory location for all of it with mishimoto full size radiator


Instagram Sheaperk

BoostedK20
03-06-2016, 08:37 PM
I havent got my new cooler on yet. But my last setup i had to cut quite a bit. http://uploads.tapatalk-cdn.com/20160305/9b94565eed1762ee0881802e6d194456.jpg

For the gauges; I just bought single gauge mounts and screwed them to the plastic steering column cover


Instagram Sheaperk

Say cheese!!

Jonezy
03-10-2016, 07:49 PM
Did youngest you have arp625+ upgraded bolts?

Sheaperk
03-10-2016, 07:53 PM
Yes i have them


Instagram Sheaperk

Jonezy
03-10-2016, 07:56 PM
Sweet. As much as I don't want to hear that I need em, it's nice that people answer definitively

BoostedK20
03-15-2016, 10:00 AM
Sweet. As much as I don't want to hear that I need em, it's nice that people answer definitively

Truth is what matters!

Jonezy
03-15-2016, 06:31 PM
I know right!!

Found that I don't exactly need to go nuts on Manley TT rods, and there are other 625+ alternatives rated to 1000bhp, well above what I'm aiming out

BoostedK20
03-29-2016, 10:56 AM
I know right!!

Found that I don't exactly need to go nuts on Manley TT rods, and there are other 625+ alternatives rated to 1000bhp, well above what I'm aiming out

Have you made any moves yet?

Jonezy
03-29-2016, 12:02 PM
None yet,still waiting on engine builder / money before I choose anything.

The crower H beams with 625+ bolts are very tempting as they are o n special everywhere I look

Sheaperk
03-29-2016, 01:04 PM
I went with the 14404-4 turbo tuffs and arp 2000 cap screws


Instagram Sheaperk

Jonezy
03-29-2016, 01:23 PM
Sure you said you had 625+ bolts earlier?
Or were you just referring to the manleys part.

Sheaperk
03-29-2016, 01:29 PM
I though i did. I just checked . Its been a few years since i bought them lolhttp://uploads.tapatalk-cdn.com/20160329/87b03193f5f8ab1097d686a234887575.jpg


Instagram Sheaperk

Sheaperk
03-29-2016, 01:30 PM
Only, now its 87.5mm


Instagram Sheaperk

Jonezy
03-29-2016, 04:03 PM
Ah with you now

Thanks for checking.

BoostedK20
04-06-2016, 10:56 AM
How are things coming along?

Sheaperk
04-06-2016, 11:31 AM
Waiting on fabricator at T1. They just got done with tx2k16. So im up next. :)


Instagram Sheaperk

BoostedK20
04-09-2016, 10:03 AM
Waiting on fabricator at T1. They just got done with tx2k16. So im up next. :)


Instagram Sheaperk

Nice! They're doing the entire engine build?

Sheaperk
04-09-2016, 11:55 AM
T1 machine shop built long block, their doing the exhaust and charge pipes, and the tune.


Instagram Sheaperk

06_typeS
04-11-2016, 05:23 AM
Nice build, what are you running for your BBK?

Sheaperk
04-11-2016, 11:10 AM
Factory brakes at the moment


Instagram Sheaperk

Sheaperk
04-16-2016, 01:54 PM
Well the fabricator is too busy at the moment. So i went a picked up the car and brought back home to a local badass exhaust shop.

Downpipe is well underway now!
http://uploads.tapatalk-cdn.com/20160416/4a39066d4f589824f584acad71334d1b.jpghttp://uploads.tapatalk-cdn.com/20160416/829da65c43d95249c731e14cd7e8bfaf.jpghttp://uploads.tapatalk-cdn.com/20160416/7a90896679db96f42c305453d998e9b6.jpg


Instagram Sheaperk

Sheaperk
04-27-2016, 02:32 PM
Exhaust and downpipe are madehttp://uploads.tapatalk-cdn.com/20160427/a7432c051e4d4bafa817fb021fc44882.jpghttp://uploads.tapatalk-cdn.com/20160427/2658572bcd9dc70aaa4283e8347e696f.jpghttp://uploads.tapatalk-cdn.com/20160427/e60daa4c3546685b7e98ef14976baea6.jpghttp://uploads.tapatalk-cdn.com/20160427/ba0ba3752623efbed605215cad81a2b4.jpg


Instagram Sheaperk

BoostedK20
04-27-2016, 11:25 PM
Love the fender exit! Will you be outlining the hole with a CF/SS plate?

Sheaperk
04-27-2016, 11:49 PM
It will definitely have a beauty ring of some special sorts!


Instagram Sheaperk

Sheaperk
05-07-2016, 11:48 PM
Local fabricator knocking out charge pipes and mounts for intercooler! 😀http://uploads.tapatalk-cdn.com/20160508/28ee6e0d102fef3409505c4cb5371169.jpg
http://uploads.tapatalk-cdn.com/20160508/c2943294b89fea2f6755ea1d4c7e6e8f.jpg


Instagram Sheaperk

BoostedK20
05-19-2016, 03:58 PM
Awesome! Fabricator does nice work!

turbo02si
06-21-2016, 01:53 PM
Awesome build dude. I'm building an ep3 too and I want to do a similar down pipe, except exit on the other side of the car. Do you have any pictures of how you snuck that pipe through or what you cut from the inside of the bay?

Sheaperk
06-23-2016, 10:50 PM
Cammed ss camaro dyno'd 460whp

Turbo k20 6266. 22lbshttps://vimeo.com/172055310


Instagram Sheaperk

BoostedK20
06-26-2016, 09:27 PM
Awesome build dude. I'm building an ep3 too and I want to do a similar down pipe, except exit on the other side of the car. Do you have any pictures of how you snuck that pipe through or what you cut from the inside of the bay?
I take it you can find the pictures on his instagram Sheaperk


Cammed ss camaro dyno'd 460whp

Turbo k20 6266. 22lbshttps://vimeo.com/172055310


Instagram Sheaperk
You ate that camaro alive!!

Sheaperk
07-10-2016, 10:36 AM
http://youtu.be/NQwQbMOAyxA


Instagram Sheaperk

BoostedK20
07-16-2016, 09:18 AM
http://youtu.be/NQwQbMOAyxA


Instagram Sheaperk

Good run!

Sheaperk
07-16-2016, 04:14 PM
Maxxed out id2000 injectors at 30lbs made 709whp
https://vimeo.com/174964590


Instagram Sheaperk

BoostedK20
07-27-2016, 09:38 AM
Love that spool, car sounds great! What's your fuel setup? I'm surprised you're maxxed out on those injectors at that power level.

Sheaperk
07-27-2016, 10:06 AM
Well with the base fpsi it was maxxed out. We can definitely get more out of the id2k's with higher base pressure.
I upgraded from 2 255's to 2 450's intank recently


Instagram Sheaperk

Sheaperk
07-27-2016, 10:07 AM
http://uploads.tapatalk-cdn.com/20160727/bb697d8fbface91c6a4a1950fb328146.jpg

Not the most ideal way to fit them. But it gets the job done lol


Instagram Sheaperk

Jonezy
08-04-2016, 12:05 PM
How's this work then? ^

BoostedK20
08-04-2016, 09:39 PM
How's this work then? ^

Seems it pulls from the filters, through the pumps, out the lines that connect to the fitting the red caps are covering, and bam. Fuel, spark, power.

I'm wondering if both pumps have separate power supplies/fuses though!

Jonezy
08-05-2016, 12:12 AM
Seems it pulls from the filters, through the pumps, out the lines that connect to the fitting the red caps are covering, and bam. Fuel, spark, power.

I'm wondering if both pumps have separate power supplies/fuses though!

Smart arse lol. I mean how does that fit in the tank, can't be an oem tank shape?

Sheaperk
01-02-2017, 04:26 PM
Smart arse lol. I mean how does that fit in the tank, can't be an oem tank shape?

It fits in oe tank. Have to piece it together in the tank through the hole


Sent from my iPhone using Tapatalk

Sheaperk
01-02-2017, 04:27 PM
Made roughly 800whp turned up to 35lbs


Sent from my iPhone using Tapatalk

Sheaperk
01-02-2017, 04:28 PM
https://youtu.be/lgyNCFUptKQ


Sent from my iPhone using Tapatalk

Sheaperk
01-02-2017, 04:29 PM
https://youtu.be/zBAJj4zUVMU


Sent from my iPhone using Tapatalk

Sheaperk
01-02-2017, 04:44 PM
https://youtu.be/zBAJj4zUVMU


Sent from my iPhone using Tapatalk

Sheaperk
01-02-2017, 04:46 PM
https://youtu.be/V_fPcBktKMI


Sent from my iPhone using Tapatalk

Sheaperk
01-02-2017, 04:48 PM
https://youtu.be/OHqmKeU-YV4


Sent from my iPhone using Tapatalk

BoostedK20
01-03-2017, 09:31 PM
Car sounds good and ran nicely! I'd say mid-high 9 second 1/4 mile. How do you feel shes running?

Sheaperk
01-19-2017, 11:45 PM
Car sounds good and ran nicely! I'd say mid-high 9 second 1/4 mile. How do you feel shes running?

Thanks man! Yea mid 9 for sure how it sat. Based on the 8.80 in the 1000ft


Sent from my iPhone using Tapatalk

BoostedK20
02-03-2017, 10:40 AM
What's next for your winter?