PDA

View Full Version : NeverEnding Quest for Power



K20JuJu
02-16-2016, 01:06 PM
Hello everyone

Iva had my car close to 5 years now, Original Color Midori Green (Obviously Repainted) , it was B Series Turbo, spun a bearing and decided to sell everything and Go K Series, Didnt want to Go All Out so i went a piston and Rod Set up, something safe and Fun drive


Head

Complete Supertech Head pakg
(Valves,Springs,Retainers & Keepers)
IPS K10 cams
Skunk 2 Ultra Manifold
Skunk 2 90mm TB
2 Liter plenum
1000cc iD injectors
Precision 67/66 turbo
BWR Sidewinder /60mm Flange
Tial 60mm WG


Bottom End (stock)

K20
Arias 11:1 86mm pistons
Upgraded Wristpins
Eagle Rods
Clevite Racing Bearing
TD Autoworks timing Sproke assembly
New Timing Chain
New Chain Tensioner


Fuel System

Bosch 044 Fuel Pump
Inline Fuel filter
Aeromotive Fuel Regulator
E85


Transmision

6 Speed Type S
OBX 1-4th gears
MFactory LSD
Stock axles
Clutchmasters Twin dics

Suspension

D2 Coilovers
F7 control Arms
Skunk 2 Front Camber kits
Engalls Rear Camber Kit
TE37 in Mag Blue
Nitto NT01

http://uploads.tapatalk-cdn.com/20160216/096f34f449e9726bcd12ecbe5c3e63f2.jpg

http://uploads.tapatalk-cdn.com/20160216/224f2a16690f713a82066499ed4bbb57.jpg

http://uploads.tapatalk-cdn.com/20160216/48c87ed953c4ed69e7ce673ca110b4fc.jpg


http://uploads.tapatalk-cdn.com/20160216/e7d44448e27e9b573058cd546c6b3e16.jpg

http://uploads.tapatalk-cdn.com/20160216/8d7755162cc12d375ee8062baf8971c6.jpg


http://uploads.tapatalk-cdn.com/20160216/0f45c865816b2ebd465d55b774a91410.jpg

http://uploads.tapatalk-cdn.com/20160216/c5ceab1aaf5ca9d964b9b1bfadc9b3af.jpg

http://uploads.tapatalk-cdn.com/20160216/1d257d5641e5214a54faa672e414acb5.jpg

http://uploads.tapatalk-cdn.com/20160216/25e70bf095b2d3d0ac668e4740e2418e.jpg

BoostedK20
02-23-2016, 12:05 PM
Love the setup! Looks promising, loving the NPC coating! In for future updates!

K20JuJu
02-23-2016, 01:17 PM
6 Weeks Later and Manifold is Finally In, BWR Sidewinder/60mm WG 😊 Now to mock & Weld up the piping

http://uploads.tapatalk-cdn.com/20160223/17406540a7a23d0807c9b8d261e2f8ba.jpg

http://uploads.tapatalk-cdn.com/20160223/0d39e405b02230db0d5cdbec323a155b.jpg

BoostedK20
02-24-2016, 12:10 PM
She looks good! Are you going to have it coated or wrap it?

K20JuJu
02-24-2016, 01:03 PM
She looks good! Are you going to have it coated or wrap it?

Ive Been debating, even tho i have the Heat Shield for the turbo and the heat wrapping for the manifold.

K20JuJu
03-01-2016, 12:41 AM
*Update*

2/29/16

Few Parts Arrived today, Closer and Closer lol since we were on hold because of the turbo Manifold started giving the Fuel system a look Over, i had 1000cc injectors were left over from The B Motor and Walbro 255 , These Werent gonna cut it Anymore, upped the Injectors to 2200cc (SouthBay) and a Walbro 450 , E85 is becoming a little more accessible in my Area went with the AEM Flex Fuel Sensor , ive been hearing good things about it. Since im installing the OBX 1-4 Straight Cut Gears and MF Diff decide to replace all the Syncros (not knowing the abuse the tranny received before my hands). ill have pics of the gears Tomm.


http://uploads.tapatalk-cdn.com/20160301/86c5e4c79872cd16e130d9e15cbc85a6.jpg

http://uploads.tapatalk-cdn.com/20160301/7656737f8dbefeea9fb835157113fa79.jpg

http://uploads.tapatalk-cdn.com/20160301/a480065adb54d6ceb91bd4ca52cf50a1.jpg

http://uploads.tapatalk-cdn.com/20160301/a042d330de581588b915e6d217b4fa66.jpg

http://uploads.tapatalk-cdn.com/20160301/6cef195c7a07edb3aa3c38c63f19eb26.jpg

http://uploads.tapatalk-cdn.com/20160301/cc29c878bc8c89f676a58a78807b7829.jpg

K20JuJu
03-01-2016, 08:56 AM
PetefromtheStreets

Thanks for the Seals part Number, Ordered & waiting on delivery to finish up the Tranny and Mount the Motor

PetefromtheStreets
03-01-2016, 10:31 AM
PetefromtheStreets

Thanks for the Seals part Number, Ordered & waiting on delivery to finish up the Tranny and Mount the Motor

No problem man. You said you bough obx 1-4? Do you have pics?


Sent from my iPhone using Tapatalk

PetefromtheStreets
03-01-2016, 10:33 AM
And nice updates. Motor looks good and that trans casing is 🔥🔥🔥🔥


Sent from my iPhone using Tapatalk

K20JuJu
03-01-2016, 11:46 AM
No problem man. You said you bough obx 1-4? Do you have pics?


Sent from my iPhone using Tapatalk

Yea 1 - 4 gear since its the most beat on Gears, I dont have on this phone but i will have pics later today when i go take the Synchros to get installed

K20JuJu
03-01-2016, 11:51 AM
And nice updates. Motor looks good and that trans casing is 🔥🔥🔥🔥


Sent from my iPhone using Tapatalk

Thank you, i have the motor mount Brackets painted the same color effect, mounts & subframe (since i had to use a EG due to the EKK2 Mounts) were painted Gun Metal .

K20JuJu
03-01-2016, 02:44 PM
[QUOTE=PetefromtheStreets;32351]No problem man. You said you bough obx 1-4? Do you have pics?



Here they are

http://uploads.tapatalk-cdn.com/20160301/1fb993ec7ea17197bcc9a44762102861.jpg

http://uploads.tapatalk-cdn.com/20160301/8747af33aca7305d25f2a6c87979b759.jpg

http://uploads.tapatalk-cdn.com/20160301/4acb7720c53dec31c836716d2fb665f3.jpg

http://uploads.tapatalk-cdn.com/20160301/4009325e79be0a9a51d509da75bc9560.jpg

http://uploads.tapatalk-cdn.com/20160301/393455ca1eeeb2b71f7586773d515033.jpg

http://uploads.tapatalk-cdn.com/20160301/77cc1a460a079b9fd00cd56d589f58bc.jpg

http://uploads.tapatalk-cdn.com/20160301/11cd6b2bbc3c5a130cb6c751f8ed7e66.jpghttp://uploads.tapatalk-cdn.com/20160301/f8073cada3da93d14204b8807dd74179.jpg

PetefromtheStreets
03-01-2016, 02:46 PM
Ahh so 1/2 is semi helical. And 3/4 are tru straight cut. Nice man hope they work out for you. A friend and member here had 1/2 and broke 1st gear


Sent from my iPhone using Tapatalk

BoostedK20
03-01-2016, 05:17 PM
Here they are

http://uploads.tapatalk-cdn.com/20160301/1fb993ec7ea17197bcc9a44762102861.jpg

http://uploads.tapatalk-cdn.com/20160301/8747af33aca7305d25f2a6c87979b759.jpg

http://uploads.tapatalk-cdn.com/20160301/4acb7720c53dec31c836716d2fb665f3.jpg

http://uploads.tapatalk-cdn.com/20160301/4009325e79be0a9a51d509da75bc9560.jpg

http://uploads.tapatalk-cdn.com/20160301/393455ca1eeeb2b71f7586773d515033.jpg

http://uploads.tapatalk-cdn.com/20160301/77cc1a460a079b9fd00cd56d589f58bc.jpg

http://uploads.tapatalk-cdn.com/20160301/11cd6b2bbc3c5a130cb6c751f8ed7e66.jpghttp://uploads.tapatalk-cdn.com/20160301/f8073cada3da93d14204b8807dd74179.jpg

How much did they run you? Are you doing the install yourself?

PetefromtheStreets
03-01-2016, 05:23 PM
If you aren't doing them yourself where are you located? If you need it I have rebuilt several transmissions including my own PPG setup


Sent from my iPhone using Tapatalk

K20JuJu
03-01-2016, 05:30 PM
Ahh so 1/2 is semi helical. And 3/4 are tru straight cut. Nice man hope they work out for you. A friend and member here had 1/2 and broke 1st gear


Sent from my iPhone using Tapatalk

Hopelly i wont have the same luck lol

K20JuJu
03-01-2016, 05:31 PM
If you aren't doing them yourself where are you located? If you need it I have rebuilt several transmissions including my own PPG setup


Sent from my iPhone using Tapatalk

Yea i Have Local Shop here In NYC Putting the Transmission together

BoostedK20
03-01-2016, 05:39 PM
Very happy you scooped up SFI injectors!

K20JuJu
03-02-2016, 01:22 AM
Out with the Old , In with the New 450 e85 Compatible pump 😁😁

http://uploads.tapatalk-cdn.com/20160302/b5ae06e10c8860f511e3f510c6bf20ad.jpg

http://uploads.tapatalk-cdn.com/20160302/de46583aee77428837c4c62a76cdca61.jpg

http://uploads.tapatalk-cdn.com/20160302/3a02c48d70c8f5dedef77e4bfb8edfaa.jpg

Here a quick shot of the Mounts & Bracket painted by NeedPowderCoating in NJ (A1 sauce)

http://uploads.tapatalk-cdn.com/20160302/1bd13ff538baec72f7309c29625eeb32.jpg
http://uploads.tapatalk-cdn.com/20160302/8508441b3a00dd978468d44e6921710d.jpg
http://uploads.tapatalk-cdn.com/20160302/0098a51b202cfc226e84950ff148e92d.jpg
http://uploads.tapatalk-cdn.com/20160302/d588af3f58cc50bf1f8f3f1ed7fa7023.jpg

K20JuJu
03-02-2016, 01:36 AM
While the Synchros & Gears were being installed, decide to experiment a little with the Manifold and flipped it, just by looking at it i can tell the headlight is going to be a problem :/ it does look cool though




http://uploads.tapatalk-cdn.com/20160302/b6bfd1c18532cff0334ad840bbbe0f25.jpg
http://uploads.tapatalk-cdn.com/20160302/7d0416c61d212780a0f509a7893daf31.jpg
http://uploads.tapatalk-cdn.com/20160302/9e10a5a02683df2719a42530dad512d5.jpg

K20JuJu
03-02-2016, 01:45 AM
Very happy you scooped up SFI injectors!

Only heard Good things about them & Theyre company.

K20JuJu
03-02-2016, 09:10 PM
First Side Done

http://uploads.tapatalk-cdn.com/20160303/bf4392dafa18dcf24ccc74ccd62b55b2.jpg
http://uploads.tapatalk-cdn.com/20160303/46b54b8d633fb8e07c781e2aedec16f4.jpg


Factory VS Stock

http://uploads.tapatalk-cdn.com/20160303/3bcb47046c53a10c447dae5f959f2733.jpg

PetefromtheStreets
03-03-2016, 12:08 PM
Those sensors may be a problem with your hood as well with the IM flipped that direction.


Sent from my iPhone using Tapatalk

PetefromtheStreets
03-03-2016, 12:09 PM
But it's looking good man. Love that 3/4th gear. Straight cut ftw!!!


Sent from my iPhone using Tapatalk

K20JuJu
03-03-2016, 12:17 PM
Those sensors may be a problem with your hood as well with the IM flipped that direction.


Sent from my iPhone using Tapatalk

Yea that was the first thing i noticed when i flipped it,But Lucky they have the same size holes on the other side as well , i will post pics of them when i get to the shop later

K20JuJu
03-03-2016, 10:13 PM
Those sensors may be a problem with your hood as well with the IM flipped that direction.


Sent from my iPhone using Tapatalk


SK2 FTW lol i can use those same caps on the holes now and switch everything over but im Short 1 hole :/ , It all comes down to how would it fit with the Headlight and how much of the light would be needed to cut off


http://uploads.tapatalk-cdn.com/20160304/9f92ffeda71a5c2979d31451b6b8324f.jpg
http://uploads.tapatalk-cdn.com/20160304/8f1124c20ac0d34cbc28804b68d51ff9.jpg

Here are both Gear Shafts, This Thing Looks BEASTLY !!!!!

http://uploads.tapatalk-cdn.com/20160304/38abafad520f2d392d02c24a9f7c1739.jpg

PetefromtheStreets
03-03-2016, 10:15 PM
SK2 FTW lol i can use those same caps on the holes now and switch everything over but im Short 1 hole :/ , It all comes down to how would it fit with the Headlight and how much of the light would be needed to cut off


http://uploads.tapatalk-cdn.com/20160304/9f92ffeda71a5c2979d31451b6b8324f.jpg
http://uploads.tapatalk-cdn.com/20160304/8f1124c20ac0d34cbc28804b68d51ff9.jpg

Here are both Gear Shafts, This Thing Looks BEASTLY !!!!!

http://uploads.tapatalk-cdn.com/20160304/38abafad520f2d392d02c24a9f7c1739.jpg

Gears look boss man.

And you can always drill and tap a hole for an additional sensor.


Sent from my iPhone using Tapatalk

K20JuJu
03-16-2016, 10:33 PM
*Update*

Motor Is Finally In !

Color cotrast look amazing, Should have her running by next week



http://uploads.tapatalk-cdn.com/20160317/97f860e0e65a3c6c3da8ad00d5f87e32.jpg
http://uploads.tapatalk-cdn.com/20160317/f067b0c05b6791788f060f7bd9e1b21d.jpg
http://uploads.tapatalk-cdn.com/20160317/fa444f607b2377c5739f71ec9041bdf5.jpg



Sent from my iPhone using Tapatalk

vdubkilla
03-16-2016, 11:50 PM
Lookin good man one of these days I need to build a trans with some "real" gears in it .It the last thing I need to complete my build as the ep3 s serve me well but they are always on borrowed time.

K20JuJu
03-27-2016, 01:29 PM
*Update*

Sold the Journal Bearing and went with a 64/66 Precision that came up for a good price ...Looks so pretty 😍😍



http://uploads.tapatalk-cdn.com/20160327/6409d09f03a1a9a9d39c537ff01efae3.jpghttp://uploads.tapatalk-cdn.com/20160327/1927fc51befad6b70281e0cbafb1da3f.jpghttp://uploads.tapatalk-cdn.com/20160327/9b170c875c47b116567c8680233f1743.jpg


Sent from my iPhone using Tapatalk

PetefromtheStreets
03-27-2016, 01:42 PM
*Update*

Sold the Journal Bearing and went with a 64/66 Precision that came up for a good price ...Looks so pretty 😍😍



http://uploads.tapatalk-cdn.com/20160327/6409d09f03a1a9a9d39c537ff01efae3.jpghttp://uploads.tapatalk-cdn.com/20160327/1927fc51befad6b70281e0cbafb1da3f.jpghttp://uploads.tapatalk-cdn.com/20160327/9b170c875c47b116567c8680233f1743.jpg


Sent from my iPhone using Tapatalk

Damn she looks good man. Keep the updates coming

BoostedK20
03-29-2016, 10:55 AM
Awesome! Nice to see things coming together well. Looking forward to coming updates!

K20JuJu
04-09-2016, 12:08 AM
*Update*

All Fabwork is done,downpipe, intercooler and Dumptube pipping is all Complete, Catch Can is in Place and bolted up,Relocate the Fuse box to under the Passenger Airbag (Removed Airbag) ,
Quick test fit of the Bumber lets you see how the intercooler fit



http://uploads.tapatalk-cdn.com/20160409/b158925e3a5abb7c084da383811fd6e2.jpghttp://uploads.tapatalk-cdn.com/20160409/7596115c0d6da98515535270abc3069d.jpghttp://uploads.tapatalk-cdn.com/20160409/bfe2a22b15436b0441354bde25ae14b3.jpghttp://uploads.tapatalk-cdn.com/20160409/e5bcf59a5ed9964f29462069c21accd3.jpghttp://uploads.tapatalk-cdn.com/20160409/1ac8a0822e14faffbbc0ccfdba417883.jpg


Sent from my iPhone using Tapatalk

BoostedK20
04-09-2016, 10:14 AM
Looking awesome!! Which bov will you be running?

K20JuJu
04-16-2016, 08:21 AM
Looking awesome!! Which bov will you be running?

Tial , just noticed i didnt have any pictures of it On the motor

K20JuJu
04-16-2016, 08:27 AM
Finally Got Her Running Last Night !!!! Jesus hearing her run made it the Wait worth it, now to break the motor in and fix all the minor kinks to then Tune. BIG BIG difference from the Gearing in a Bseries, gears are way closer, upshifting from 5th to 6th , i kept putting in 4th lol car is running on limp mode until i get the hang of the gearing and shifting



http://uploads.tapatalk-cdn.com/20160416/863c82faa5a01799cb3751afd6a4e27c.jpg

http://uploads.tapatalk-cdn.com/20160416/2ed7f32f8b38a240506ce8d8e811c1a6.jpg

http://uploads.tapatalk-cdn.com/20160416/197895a7b60cb5175824a017458cefd0.jpg


Sent from my iPhone using Tapatalk

K20JuJu
03-22-2017, 04:16 PM
Hello everyone, havent updated in a while, things get a litle hectic with a New Born... Hatch is under the knife getting a few things updated.

Finally i was able to pick up a Skunk 2 Ultra CenterFeed Manifold and K tuned 90mm Throttle body for a decent price compared to retail, A Close friend had an AFI intercooler with dual rear door left over from his turbo build so i junped on it. a few other things need to be replaced but well get to that later..heres the lastest updates

https://uploads.tapatalk-cdn.com/20170322/172b72f7df3e2fadc2b2ba75d675dcf0.jpg


https://uploads.tapatalk-cdn.com/20170322/058cfbc14eb625b1c185a844242c14a3.jpg


https://uploads.tapatalk-cdn.com/20170322/1d6a59d7bdd5ee9283e2318be18ab81e.jpg


https://uploads.tapatalk-cdn.com/20170322/45021bf67b040006e506aeac2118c80d.jpg

https://uploads.tapatalk-cdn.com/20170322/8fc0fcdcfb2b30efef73ac5aa3292dd6.jpg

K20JuJu
03-25-2017, 01:39 PM
So got some time to install a K Tuned Billet Shifter with Stock cables of coarse. ive heard alot from the Ktuned race spec cables so went with the OEM. fabbed up a shroud for the Raditor, Opted for the Ktuned Upper filler neck with fittings to the radiator, gives it a very Cleaner look.



https://uploads.tapatalk-cdn.com/20170325/f6a5b67dd34fb45f35debfc3be8dfc7c.jpghttps://uploads.tapatalk-cdn.com/20170325/9b116e22ebc7c17d6ccdb1d8f8c6f697.jpg