PDA

View Full Version : K Series Tranny Help



K20JuJu
02-15-2016, 11:07 AM
Hello everyone

New to the Site, should have a few More updates soon.

So im currently buiding my K20 in a Midori Green Ek

So far everythings been Sloow Progress,Just got back my tranny Casing from Needpowdercoating here in NJ , "Grey Vein" is the effect, Now i need the Parts Numbers for the seals ....Does Anybody Or can anybody tell me those Parts Numbers



http://uploads.tapatalk-cdn.com/20160215/5c34ba45ff7c703a3726c9f10aead1b5.jpg

BoostedK20
02-16-2016, 12:02 PM
Welcome to the forum! Need Powder Coating does great work, I love the look!
PetefromtheStreets should have the answer for you.

PetefromtheStreets
02-16-2016, 12:05 PM
Hello everyone

New to the Site, should have a few More updates soon.

So im currently buiding my K20 in a Midori Green Ek

So far everythings been Sloow Progress,Just got back my tranny Casing from Needpowdercoating here in NJ , "Grey Vein" is the effect, Now i need the Parts Numbers for the seals ....Does Anybody Or can anybody tell me those Parts Numbers



http://uploads.tapatalk-cdn.com/20160215/5c34ba45ff7c703a3726c9f10aead1b5.jpg

What's up man. What seals are you looking to replace? The axle seals only? Or internal seals like the ones for the mainshaft?


Sent from my iPhone using Tapatalk

PetefromtheStreets
02-16-2016, 12:05 PM
Btw that is dope looking.


Sent from my iPhone using Tapatalk

K20JuJu
02-16-2016, 12:12 PM
What's up man. What seals are you looking to replace? The axle seals only? Or internal seals like the ones for the mainshaft?


Sent from my iPhone using Tapatalk


Hello,
so All Seals Basically, Everything was removed to be able to powdercoat properly,

K20JuJu
02-16-2016, 12:13 PM
Welcome to the forum! Need Powder Coating does great work, I love the look!
PetefromtheStreets should have the answer for you.

Thank you, thats Same Color i did On the Motor Mounts

PetefromtheStreets
02-16-2016, 12:17 PM
Hello,
so All Seals Basically, Everything was removed to be able to powdercoat properly,

I'll get you the part numbers. Give me a few.


Sent from my iPhone using Tapatalk

K20JuJu
02-17-2016, 12:15 PM
I'll get you the part numbers. Give me a few.


Sent from my iPhone using Tapatalk

Great, Thnk you

PetefromtheStreets
02-18-2016, 11:46 AM
Do you need bearings also? Or just seals?


Sent from my iPhone using Tapatalk

K20JuJu
02-18-2016, 11:55 AM
Do you need bearings also? Or just seals?


Sent from my iPhone using Tapatalk

Just the Seals

PetefromtheStreets
02-18-2016, 12:08 PM
Passenger side axle seal-
91206-PHR-003

Driver side axle seal
91205-PL3-B01

Oil seal-
91216-PG1-005

this seal sits under the bearing for the main shaft where it slides through the transmission casing keeping oil inside the trans and out of the clutch housing.

Hope this helps.



Sent from my iPhone using Tapatalk

K20JuJu
02-18-2016, 12:09 PM
Passenger side axle seal-
91206-PHR-003

Driver side axle seal
91205-PL3-B01

Oil seal-this seal sits under the bearing for the main shaft where it slides through the transmission casing keeping oil inside the trans and out of the clutch housing.

Hope this helps.
91216-PG1-005



Sent from my iPhone using Tapatalk

Awesome !! Thank you so much, i should have some updates later

PetefromtheStreets
02-18-2016, 01:39 PM
Awesome !! Thank you so much, i should have some updates later

No problem. In for updates!!


Sent from my iPhone using Tapatalk

BoostedK20
02-23-2016, 12:06 PM
Thank you for helping out PetefromtheStreets I'm eager to see how things pan out! K20JuJu keep us updated!