PDA

View Full Version : marsman328's Sheepey Built DC5 Build



marsman328
12-01-2015, 07:40 PM
Greetings :biggrin:

Some of you might know me from ClubRSX (hi)! For those who don't know me, hello. I've been on ClubRSX for years, decided i would finally post up on here.

Enjoy!

Sponsors:
• Continental Tire
• Seibon Carbon Fiber
• NeoChromeParts.com
• DICE Motorsports
• Sheepey Built

Modification List:

Interior:
• OEM DC5 Type-R Recaro Seats, Black suede w/ red stitch
• OEM DC5 Type-R Rear Suede Seats
• OEM DC5 Type-R Honda Badges
• Autopower 4point roll-bar (custom fitted through rear panels)
• Full black interior
• Custom black suede headliner
• S2000 Cluster retrofit
• S2000 push start button with custom carbon panel
• Nardi 330mm black/red stitch steering wheel
• NRG steering wheel release/short hub
• Crow Enterprises Black 3” 6 point racing harnesses
• Pioneer Navigation
• JL Audio 4ch/mono Amplifiers & speaker/12”sub
• Generic C-pillar Bar
• Hybrid Racing RSX Shifter Box
• Skunk2 Weighted Knob

Exteror/Body:
• Custom pearl white color (BMW Frost/Lexus Pearl)
• Shaved engine bay, with blue flake
• Seibon Carbon Fiber TS Style Hood, Paint matched, showing carbon in vents
• Seibon Carbon Fiber TR Style Spoiler, sides of spoiler paint matched
• OEM A-Spec Front lip
• Type R Front Bumper
• Mugen Style VIS Side Skirts
• Mugen Style VIS Rear Lip (custom molded to rear bumper)
• Custom mounted flush back up camera in 3rd brake light
• OEM DC5 Type R Black Housing HID Headlights
• Password JDM Bumper Quick Release Fasteners (Custom NeoChrome Blue)
• PLX DM-100 Touch & DM-6 (Two) Gauges
• Ortiz Custom Pods
Dual Center Console Gauge Mount & Single Left Air Vent Mount

Brakes/Suspension:
• AP Racing 4 Piston BBK 330mm (Custom NeoChrome Blue Caliper and Hat)
• Function&Form TypeII Coilovers
• OEM DC5 Type R Sway Bars/Control arms

Wheels/Tires:
• Rays Gram Light 57dr Semi-Gloss Black
18X9.5 +22/18X9.5 +38
• Continental Tires: Extreme Contact DW
235/40/18 (front) 225/40/18 (rear)
• Project Kics R40 Iconix Locking Lug Nuts (NeoChrome w/ black centers)

Motor/Performance:
• Hondata K-Pro
• RBC Intake Manifold (CNS Custom Works Shaved and Polished)
• Golden Eagle Fuel Rail
• K-Tuned A/C P/S Delete
• Tucked Clutch Line
• Relocated Fuse Box
• Relocated Battery
• Wireworx Non-MilSpec Tucked Engine Harness
• Custom ABS Delete Tucked Brake Line Kit (Encore Kit)
• Innovative 75a Billet Mounts w/ steel front mount
• Valve Cover (Custom NeoChrome Blue) with custom All-In Fab Catch Can
• Innovative 75a Billet Mounts (Custom NeoChrome Blue)
• Competech Titanium Front Strut Bar (mounts Custom NeoChrome Blue)
• Downstar Dress Up Washers and bolts (Washers Custom NeoChrome Blue)
• Sheepey Built Turbo Kit,
Black thermal coated Manifold, DP, Exhaust Housing
Precision 6062 Gen 2 Ball Bearing Turbo
• Tial 60mm Wastegate/50mm Blow off Valve (Clear Anodized)
• RyWire Tucked Radiator w/ -16 AN fittings
Jegs -16 AN Blue/Silver Fittings
Russell Black Nylon Braided Hose w/ blue accents
• K24a2 Block
• Weisco 87.5mm Pistons 8.8:1
• Eagle H-Beam Rods
• OEM Honda Bearings
• Supertech Valves(flat face)/Springs/Retainers
• Black powdered OEM Throttle Body/K-Tuned spacer
• Skunk2 Low profile Valve Cover hardware
• Walbro 400lph Fuel Pump
• Injector Dynamics 1000cc Injectors
• Aeromotive Fuel Pressure Regulator
• Jegs Blue/Silver –AN fittings (-8an Feed, -6an Return)
• Russell Black Nylon Braided Hose w/ blue accents (-8an Feed, -6an Return)
• Competition Clutch Stage 4
• Fluidampr Crank Damper
• K-Tuned Oval 3” Catback Exhaust
• K-Tuned K20 Upper coolant housing with filler neck (-16 an fitting)
• K-Tuned K-Series Lower swivel housing with (-16 an & recirculation fitting)
• K-Tuned Coolant Cap
• K-Tuned Billet Throttle Cable/Bracket
• K-Tuned Billet Transmission Bracket
• K-Tuned Coil Pack Cover



The Engine Bay Shave:

http://i24.photobucket.com/albums/c10/marsman328/My%20Car/07363EDE-0D99-4787-A613-3954A5FFDBBF_zps7kg7akh8.jpg

http://i24.photobucket.com/albums/c10/marsman328/My%20Car/AB7C83ED-5AD0-4C53-9A6E-81B19EFB4A59_zpsp5ggiq9r.jpg

http://i24.photobucket.com/albums/c10/marsman328/My%20Car/A73661ED-7DE7-4F8C-B3CD-B421D5C4E949_zpsxqctfxza.jpg

http://i24.photobucket.com/albums/c10/marsman328/My%20Car/B675CB69-0709-4150-9078-DE3BD5175CCC_zpsq1lgo1it.jpg

http://i24.photobucket.com/albums/c10/marsman328/My%20Car/85353082-1298-4009-A23D-BB5CF8B1E5FC_zpsly1jaex8.jpg


The Motor:

http://i24.photobucket.com/albums/c10/marsman328/My%20Car/A8E020D3-FFD0-40DF-B970-4CBA5B2888D0_zpskqhftpwi.jpg

http://i24.photobucket.com/albums/c10/marsman328/My%20Car/B3C870BC-64EB-4062-BF76-EB597101F907_zpszowckh90.jpg

http://i24.photobucket.com/albums/c10/marsman328/My%20Car/3C75B79C-488B-44BF-A4C5-36004971BAAE_zpssrgpbyno.jpg

http://i24.photobucket.com/albums/c10/marsman328/My%20Car/5492AB51-274F-4B5F-854B-EAA48C7E4D07_zpswn3rqb2y.jpg

http://i24.photobucket.com/albums/c10/marsman328/My%20Car/6F742289-0248-4483-85AE-058080EE3B0B_zpsjc7hsk6w.jpg

The Sheepey Built Turbo Setup:

http://i24.photobucket.com/albums/c10/marsman328/My%20Car/9A7A272F-CAA8-4814-9A0D-91267E9ECD6B_zpsyiwncley.jpg

http://i24.photobucket.com/albums/c10/marsman328/My%20Car/2A8799F4-9ED6-44A5-B3D7-D97B5BB95B11_zps7rcbcwo3.jpg

http://i24.photobucket.com/albums/c10/marsman328/My%20Car/E5A61A90-79D8-4D0E-85A6-57EBECFD9696_zpsg16hljjw.jpg

http://i24.photobucket.com/albums/c10/marsman328/My%20Car/f7f6b975-98a8-4199-9945-cd869b6070c3_zpsxg271cur.jpg

http://i24.photobucket.com/albums/c10/marsman328/My%20Car/81BBDA07-F3EA-4000-BE60-E212AE85D1ED_zpshkmhqwsg.jpg

http://i24.photobucket.com/albums/c10/marsman328/My%20Car/3E53A9E7-A459-4536-A23A-4AE52EA4A768_zpspbj25ps0.jpg

http://i24.photobucket.com/albums/c10/marsman328/My%20Car/DD260634-49C4-48B1-8B01-52DAFD866D2C.png_zpskkhcs1fg.jpeg

http://i24.photobucket.com/albums/c10/marsman328/My%20Car/3AB91C25-E62F-43AD-B377-757866ED951C.png_zpsa2kbjamn.jpeg

http://i24.photobucket.com/albums/c10/marsman328/My%20Car/C852E489-5E5B-4616-A72E-E8A615DB08A9_zpscdgiuc1h.jpg

How she sat at SEMA 2015: (yes, i know there is no radiator lol)

http://i24.photobucket.com/albums/c10/marsman328/My%20Car/B1ADDE64-31E4-49CC-B292-CC0EC89B5E9B_zpsd3f637xz.jpg

http://i24.photobucket.com/albums/c10/marsman328/My%20Car/04512FE0-76FB-45BE-BE00-CE159D7A6E8B_zpszjzyzkb7.jpg

http://i24.photobucket.com/albums/c10/marsman328/My%20Car/F292C313-7A43-4A44-807B-2006E00DB110_zpsc7qldwkr.png

http://i24.photobucket.com/albums/c10/marsman328/My%20Car/A8307CA1-DC2C-4F5A-9D1A-7C8851154A2B_zpsuhiicpp1.jpg

http://i24.photobucket.com/albums/c10/marsman328/My%20Car/6C69E1AF-120F-4FAB-9476-86064016858D_zpsaj3kkmlc.jpg

http://i24.photobucket.com/albums/c10/marsman328/My%20Car/9ED98577-EC97-40E3-9C91-A75CA94BEF46.png_zpsflhciedx.jpeg



Picked the car up at the body shop on Thursday Oct 29,
Dropped the motor in Friday Oct 30,
Drove to Perris, CA to Sheepey Built and was at the shop 11pm on Oct 31st
Left Sheepey at next afternoon at 4pm after pulling an all nighter.
Rolled into SEMA Monday Nov 1st.

Was a very sped up process to get the car ready for that event, but there is still stuff to do before the car will be ready to run.

The loose ends I need to tie up before she will run are: the Fuel system, the Brake lines, and RyWire tucked radiator and 16 an hoses all have to be installed.

Once that is all together and tight, I will post another update!

Hopefully i will have some numbers to share with you guys within the next few weeks!

Thank to everyone who has been following my build over the years, i finally made it! lol

marsman328
12-01-2015, 07:41 PM
Had a little time over the thanksgiving holiday weekend to put in a few hours.

Ran the extended fuse box power harness thru a hidden grommet behind the passenger fender and up to the passenger air bag area. mounting the engine bay fuse box there!

http://i24.photobucket.com/albums/c10/marsman328/My%20Car/1a14e6cc-00de-4f24-9719-bdab9be5d7f5_zpsiy9629io.jpg

Started the extension process for the fuse box, calculated that I will need 183' of 18 gauge wire, and 39 feet of 12 gauge.
I should get the wire soon so i can finish the harness. Going to be solder and shrinking all connections.

http://i24.photobucket.com/albums/c10/marsman328/My%20Car/6E9ED13C-34DE-4F69-841C-0CA3CBA5C331_zpsnhykr1ro.jpg

Also, re-loomed and shrinked the charge harness. All plugged connections are already built into the engine wiring harness, so only connections for the charge are 8gauge from battery, for alternator and starter.

http://i24.photobucket.com/albums/c10/marsman328/My%20Car/6EA5DD59-2ADC-4021-8313-2D7E94D7D814_zpsu94jdzk0.jpg

Found a couple more pictures from the engine build.

My builder specialized in k-series motor and heads and he added an oil mod to the head to better lubricate the cam journals.
There is a port on the side of the head that i will run the oil feed line to.

http://i24.photobucket.com/albums/c10/marsman328/My%20Car/5CBEBE1D-2187-436C-BE2A-2C2D43F2F0AB.png_zpsqpgzpjog.jpeg

He tapped a custom oil feed port by the temp sensor.
He also tapped a second port on the right side (not shown), and plugged it just in case i want to add an additional sensor.

http://i24.photobucket.com/albums/c10/marsman328/My%20Car/4A5424D1-0D80-4B3A-8571-87C53192BAD7_zpswj0ivn5u.jpg

Lastly, a picture of the brake line tuck kit by CRSX Member EncoreDC5!! Super clean kit by the way lol

http://i24.photobucket.com/albums/c10/marsman328/My%20Car/9076F473-AE05-414A-A40A-C1DA5BDC9B20_zpsvjqjnaes.jpg

marsman328
12-01-2015, 07:41 PM
(reserved)

marsman328
12-02-2015, 03:09 AM
(reserved)

Spoolin_VTEC
12-02-2015, 02:19 PM
Hell of a build! Welcome to the forum. Congratulations on SEMA man, very cool! Loving the oil tap for the cams.

Looking forward to the rest of this build!

BoostedK20
12-02-2015, 02:43 PM
:welcome::to::boostedk20:

Beautiful build! Big congratulations on making it to SEMA! Oil tap is very interesting, I've never seen that before! Surely looking forward to the rest of your build. Brake tuck looks promising! Wiring looks like hell, but good for you for tackling it!

I appreciate you posting up and sharing with us! I will surely be keeping track of your build! What is your power goal?

marsman328
12-02-2015, 06:51 PM
Thanks guys!

Power goal is 600whp on this setup.
I will probably get a more conservative street tune for now since I am still running stock trans and axles....
I don't want to completely ruin the trans yet lol

The wiring I'm not looking forward to finishing, but it should turn out all good in the end!!

I do plan to have the car running and tuned by mid January!! ill be posting more updates as they come

Shanket
12-03-2015, 06:53 AM
Had a little time over the thanksgiving holiday weekend to put in a few hours.

Ran the extended fuse box power harness thru a hidden grommet behind the passenger fender and up to the passenger air bag area. mounting the engine bay fuse box there!

http://i24.photobucket.com/albums/c10/marsman328/My%20Car/1a14e6cc-00de-4f24-9719-bdab9be5d7f5_zpsiy9629io.jpg

Started the extension process for the fuse box, calculated that I will need 183' of 18 gauge wire, and 39 feet of 12 gauge.
I should get the wire soon so i can finish the harness. Going to be solder and shrinking all connections.

http://i24.photobucket.com/albums/c10/marsman328/My%20Car/6E9ED13C-34DE-4F69-841C-0CA3CBA5C331_zpsnhykr1ro.jpg

Also, re-loomed and shrinked the charge harness. All plugged connections are already built into the engine wiring harness, so only connections for the charge are 8gauge from battery, for alternator and starter.

http://i24.photobucket.com/albums/c10/marsman328/My%20Car/6EA5DD59-2ADC-4021-8313-2D7E94D7D814_zpsu94jdzk0.jpg

Found a couple more pictures from the engine build.

My builder specialized in k-series motor and heads and he added an oil mod to the head to better lubricate the cam journals.
There is a port on the side of the head that i will run the oil feed line to.

http://i24.photobucket.com/albums/c10/marsman328/My%20Car/5CBEBE1D-2187-436C-BE2A-2C2D43F2F0AB.png_zpsqpgzpjog.jpeg

He tapped a custom oil feed port by the temp sensor.
He also tapped a second port on the right side (not shown), and plugged it just in case i want to add an additional sensor.

http://i24.photobucket.com/albums/c10/marsman328/My%20Car/4A5424D1-0D80-4B3A-8571-87C53192BAD7_zpswj0ivn5u.jpg

Lastly, a picture of the brake line tuck kit by CRSX Member EncoreDC5!! Super clean kit by the way lol

http://i24.photobucket.com/albums/c10/marsman328/My%20Car/9076F473-AE05-414A-A40A-C1DA5BDC9B20_zpsvjqjnaes.jpg

niice spot for fusebox

Spoolin_VTEC
12-03-2015, 05:22 PM
Thanks guys!

Power goal is 600whp on this setup.
I will probably get a more conservative street tune for now since I am still running stock trans and axles....
I don't want to completely ruin the trans yet lol

The wiring I'm not looking forward to finishing, but it should turn out all good in the end!!

I do plan to have the car running and tuned by mid January!! ill be posting more updates as they come
I like the goals and conservative tune part. Reality is, the trans can go at any time. Are you running an LSD? IIRC the DC5's didn't come with one, just the Si's? I'm with BoostedK20 on that one, wiring is one thing I hated doing on my car. Even the basic stuff, it's just not my forte. I'm definitely in for those upcoming updates! As for your build running my mid-Jan, do you think anything will possible limit you? I know there is always unforeseen stuff that comes up, but I'm JW.

Hey man, I know it can be annoying but I think snapping a few pics while doing things could really help people out that want to do things but don't have the money to pay a shop. They can DIY and learn at the same time. I'm not a K-series guy but it would be cool to those in need. Maybe even those that aren't K-series related like how to do basic wiring shit. Idk, I'm just thinking it could be helpful lol. Cheers either way, don't wanna put you on the spot. I just remember when I was doing my build a lot of people PM'd me asking about how to do things or how I did things. I never took any pictures because I had a desktop computer and still use a flip phone. I could draw a better picture than my phone can take - and I can't draw for shit.

marsman328
12-03-2015, 05:44 PM
niice spot for fusebox

Thanks man.


I like the goals and conservative tune part. Reality is, the trans can go at any time. Are you running an LSD? IIRC the DC5's didn't come with one, just the Si's? I'm with BoostedK20 on that one, wiring is one thing I hated doing on my car. Even the basic stuff, it's just not my forte. I'm definitely in for those upcoming updates! As for your build running my mid-Jan, do you think anything will possible limit you? I know there is always unforeseen stuff that comes up, but I'm JW.

Money is the only thing holding me back at this point to finish. I've spent..... $(a large sum of money)... just in the past 3 months to get it ready for SEMA, and i have a couple thousand left to spend, so I'm just saving my pennies to finish up by the end of the year. (tune, brake booster delete kit, fluids, misc parts, misc fittings)



Hey man, I know it can be annoying but I think snapping a few pics while doing things could really help people out that want to do things but don't have the money to pay a shop. They can DIY and learn at the same time. I'm not a K-series guy but it would be cool to those in need. Maybe even those that aren't K-series related like how to do basic wiring shit. Idk, I'm just thinking it could be helpful lol. Cheers either way, don't wanna put you on the spot. I just remember when I was doing my build a lot of people PM'd me asking about how to do things or how I did things. I never took any pictures because I had a desktop computer and still use a flip phone. I could draw a better picture than my phone can take - and I can't draw for shit.

i am the type of guy that takes pictures of everything lol

i have a lot of pictures that i have not posted yet, i always take a lot of pictures, so ill be posting more updates as the build slowly gets finished.

Spoolin_VTEC
12-03-2015, 06:00 PM
Thanks man.

Money is the only thing holding me back at this point to finish. I've spent..... $(a large sum of money)... just in the past 3 months to get it ready for SEMA, and i have a couple thousand left to spend, so I'm just saving my pennies to finish up by the end of the year. (tune, brake booster delete kit, fluids, misc parts, misc fittings)

i am the type of guy that takes pictures of everything lol

i have a lot of pictures that i have not posted yet, i always take a lot of pictures, so ill be posting more updates as the build slowly gets finished.

Glad you take pictures of everything, that's a good habit to have! I remember times where I wish I could remember how something went before I took it apart, and I always hear the 'well if you had a smart phone you could take a picture' line. Cool man, looking forward to your updates and pictures for sure!

Also, money is definitely a holder-backer. I saw a video meme on facebook earlier today about 'oh you need to work on your car? I got exactly the tool you need!' and it's a massive tool chest. The guy pulls out the drawer and it's all $100 bills. I was :rotfl: :rotfl: :rotfl:

marsman328
12-03-2015, 06:54 PM
lol thats pretty much the reality of it!

Si Speed 317
12-05-2015, 10:49 AM
marsman328 Glad to see you made it on here! I've been MIA for a while, but I remember you from the crsx days when I was on there. Build is looking great! Definitely SEMA worthy, that's one hell of an achievement! Congratulations for sure. Hope all is well man, looking forward to your build progress over the winter!

bluEP3_SC
12-06-2015, 01:02 AM
Any reason why your extending the fuse box wiring?

I am in the process of mounting my fuse box in the same spot in my EP. I've deleted my heater/ blower unit so I have a ton of space behind the dash. I was planning on just pulling the fuse box harness back through the firewall. Maybe have to extend a few wires but it doesn't look too bad. Am I missing something or are you doing it another way?

marsman328
12-06-2015, 04:44 PM
marsman328 Glad to see you made it on here! I've been MIA for a while, but I remember you from the crsx days when I was on there. Build is looking great! Definitely SEMA worthy, that's one hell of an achievement! Congratulations for sure. Hope all is well man, looking forward to your build progress over the winter!

thanks homie!!


Any reason why your extending the fuse box wiring?

I am in the process of mounting my fuse box in the same spot in my EP. I've deleted my heater/ blower unit so I have a ton of space behind the dash. I was planning on just pulling the fuse box harness back through the firewall. Maybe have to extend a few wires but it doesn't look too bad. Am I missing something or are you doing it another way?

The hole in the firewall where the heasdlight/fusebox harness travels through, is at the bottom of the firewall under the brake booster. Factory location for the fuse box is in the engine bay next to the driver side shock tower.

I am extending the wires to go through that same hole, along the inside of the dash, and to the passenger air bag area where the box is mounted.

There is maybe 12 inches of wire that would let me swing the box to another location like under the driver headlight (the location that I had it mounted previously).

To mount the box where I want in the passenger air bag area I have to extend 11 wires 103", and 21 wires 73". I will need approximately 183 feet of 18 gauge wire, and 39 feet of 12 gauge wire.

I don't see how you would be able to mount you box I the same location that I am going through extending the wires. If you can successfully do this please post up some pictures, I would love to see your process. The EP is very similar wiring and component location wise to RSX

bluEP3_SC
12-06-2015, 04:50 PM
thanks homie!!



The hole in the firewall where the heasdlight/fusebox harness travels through, is at the bottom of the firewall under the brake booster. Factory location for the fuse box is in the engine bay next to the driver side shock tower.

I am extending the wires to go through that same hole, along the inside of the dash, and to the passenger air bag area where the box is mounted.

There is maybe 12 inches of wire that would let me swing the box to another location like under the driver headlight (the location that I had it mounted previously).

To mount the box where I want in the passenger air bag area I have to extend 11 wires 103", and 21 wires 73". I will need approximately 183 feet of 18 gauge wire, and 39 feet of 12 gauge wire.

I don't see how you would be able to mount you box I the same location that I am going through extending the wires. If you can successfully do this please post up some pictures, I would love to see your process. The EP is very similar wiring and component location wise to RSX

Well for starters- just from what I can see- my fuse box wiring harness does not go into the cabin under the brake booster- but on the passenger side under the engine harness. So I have a good amount of wire length to play with. I will have to see exactly how much- but I can't imagine that i will have to extend anything.


Sent from my iPhone using Tapatalk

marsman328
12-06-2015, 05:04 PM
Well for starters- just from what I can see- my fuse box wiring harness does not go into the cabin under the brake booster- but on the passenger side under the engine harness. So I have a good amount of wire length to play with. I will have to see exactly how much- but I can't imagine that i will have to extend anything.

That would make it much easier being on the passenger side by the engine harness. For the RSX I will have to extend everything unfortunately

bluEP3_SC
12-06-2015, 05:04 PM
http://www.boostedk20.com/forums/attachment.php?attachmentid=551&d=1449435618
http://www.boostedk20.com/forums/attachment.php?attachmentid=552&d=1449435694
http://www.boostedk20.com/forums/attachment.php?attachmentid=553&d=1449435732

This is what I'm talking about- I have probably 5-6 ft of wire in the bay to play with once I pull it through the the firewall. I can see what issues you might have if your harness pulled through on the other side- that would explain why you need to extend the wires. I'm just starting this project so I'm just double checking to make sure I'm not over looking something


Sent from my iPhone using Tapatalk

marsman328
12-06-2015, 05:16 PM
551
552553
This is what I'm talking about- I have probably 5-6 ft of wire in the bay to play with once I pull it through the the firewall. I can see what issues you might have if your harness pulled through on the other side- that would explain why you need to extend the wires. I'm just starting this project so I'm just double checking to make sure I'm not over looking something

I see, gotcha. ill have to take some more detailed pictures and post

mnc1408
12-07-2015, 08:58 AM
Awesome car, had to follow you on insta. more updates please. =]

BoostedK20
12-09-2015, 11:12 PM
I see, gotcha. ill have to take some more detailed pictures and post
I'm sure many of us are looking forward to them!

http://www.boostedk20.com/forums/attachment.php?attachmentid=551&d=1449435618
http://www.boostedk20.com/forums/attachment.php?attachmentid=552&d=1449435694
http://www.boostedk20.com/forums/attachment.php?attachmentid=553&d=1449435732

This is what I'm talking about- I have probably 5-6 ft of wire in the bay to play with once I pull it through the the firewall. I can see what issues you might have if your harness pulled through on the other side- that would explain why you need to extend the wires. I'm just starting this project so I'm just double checking to make sure I'm not over looking something


Sent from my iPhone using Tapatalk
Great timing! Definitely eager to see how yours comes out as well bluEP3_SC!

Awesome car, had to follow you on insta. more updates please. =]

Make sure you follow us as well! @ BoostedK20com :wavey:

marsman328
12-10-2015, 03:14 PM
a couple pics of the interior and some other random ones.

http://i24.photobucket.com/albums/c10/marsman328/My%20Car/699664D9-083C-468A-9A90-88E8661604A4_zpspniginal.png

http://i24.photobucket.com/albums/c10/marsman328/My%20Car/874D797A-B335-402F-992B-F0B925386B51_zpsq8vnhdr8.png

http://i24.photobucket.com/albums/c10/marsman328/My%20Car/7F2EF8E1-308C-43B0-8A36-046F8D718174.png_zpsj9tlactd.jpeg

the AP Racing calipers after they were assembled, before they were installed on the car

http://i24.photobucket.com/albums/c10/marsman328/My%20Car/C3739722-5389-4725-89E0-801B3DCFE6A0_zpsvfjk3qcb.jpg

Spoolin_VTEC
12-16-2015, 11:46 PM
Nice shots and interior! You custom make that CF panel? Which EBC pads are those? Never heard of AP Racing, looks legit though. That's for sure. Beautiful powdercoat! Love the dump and 'down'pipe setup. Beautiful man

Si Speed 317
12-26-2015, 10:57 AM
Interior and brakes are dope!!

If you don't mind me asking, how did you get sponsors for your car? Feel free to PM if you don't want it public. Just interested in the process and how it came to fruition. Merry Christmas!

marsman328
04-26-2016, 11:38 PM
Car will be done for the Eibach event in Los Angeles on May 15th, lots of new stuff.

i will post some pictures after the event. Cheers!

marsman328
05-19-2016, 01:09 AM
So this weekend was a big step for the car! Got it running, and she saw her first two shows of the season!

A big thanks to Anthony (EncoreDC5) for all of his help getting the car up and running!!
He helped with the fuse box relocation, fuel system, vacuum line system, tucked radiator install, and a bunch of misc others.

Car was at the Extreme Dimensions Show in Fullerton, CA This past Saturday, and also at the Eibach Meet in Lake Elsinore, CA!

Car is getting fully finished within the next couple of weeks, dropped her back off at Sheepey built in LA on Monday!!
Also, car is getting tuned by by Church Automotive before WekFest LA in 2 weeks!
I will post numbers as soon as i get them! :vtec: :vtec:

Here is a short vid of first startup on the newly built motor & turbo setup, and some pics from this weekend! :thumbsup:

https://youtu.be/6NY-JJUkX_4

http://i24.photobucket.com/albums/c10/marsman328/My%20Car/4B641777-7E95-440A-8896-6B486A7B9CE0_zpsp4p5zbfw.jpg

http://i24.photobucket.com/albums/c10/marsman328/My%20Car/C5E622DD-6D69-48F3-8814-5F2F144D22A0_zpssy8tpmel.jpg

http://i24.photobucket.com/albums/c10/marsman328/My%20Car/18763B67-ECF7-41C2-8333-7E1EB3FEEB3F_zps6eptfluo.jpg

http://i24.photobucket.com/albums/c10/marsman328/My%20Car/F9CE8E4C-B959-43EC-80DF-AEF757648787_zpsygmhbvpe.jpg

http://i24.photobucket.com/albums/c10/marsman328/My%20Car/7FCB2629-D0BD-410B-AAE7-966B9B29A587_zpsi2sj3xqv.jpg

http://i24.photobucket.com/albums/c10/marsman328/My%20Car/FA77E3D2-3CCD-4C2B-B0C1-A162DE3ADA7B_zpsszwpkwxt.jpg

BoostedK20
05-19-2016, 03:59 PM
Love it, love it, love it!!!

marsman328
08-20-2016, 11:09 PM
here are some updated pictures!!

general exterior:

http://i24.photobucket.com/albums/c10/marsman328/My%20Car/B9C8EA52-155E-4DCF-B4A3-CAA32DA66564_zpswzp7kkze.jpg (http://s24.photobucket.com/user/marsman328/media/My%20Car/B9C8EA52-155E-4DCF-B4A3-CAA32DA66564_zpswzp7kkze.jpg.html)

new hood exit plate:

http://i24.photobucket.com/albums/c10/marsman328/IMG_8278_zpstqoeibkv.jpeg (http://s24.photobucket.com/user/marsman328/media/IMG_8278_zpstqoeibkv.jpeg.html)

and some close-ups of the finished bay, with the different up-pipes and custom catch can!

http://i24.photobucket.com/albums/c10/marsman328/IMG_7422_zpsfkuheoxu.jpeg (http://s24.photobucket.com/user/marsman328/media/IMG_7422_zpsfkuheoxu.jpeg.html)

http://i24.photobucket.com/albums/c10/marsman328/IMG_5620_zps8hjwhibb.jpeg (http://s24.photobucket.com/user/marsman328/media/IMG_5620_zps8hjwhibb.jpeg.html)

http://i24.photobucket.com/albums/c10/marsman328/IMG_1179_zps363p0svw.jpeg (http://s24.photobucket.com/user/marsman328/media/IMG_1179_zps363p0svw.jpeg.html)

http://i24.photobucket.com/albums/c10/marsman328/IMG_5620-1_zpspseq1apo.jpeg (http://s24.photobucket.com/user/marsman328/media/IMG_5620-1_zpspseq1apo.jpeg.html)


http://i24.photobucket.com/albums/c10/marsman328/IMG_8361_zpsrurnanua.jpeg (http://s24.photobucket.com/user/marsman328/media/IMG_8361_zpsrurnanua.jpeg.html)

and one shitty pic from the rear lol

http://i24.photobucket.com/albums/c10/marsman328/IMG_5940_zpsv4igwerj.jpeg

Shanket
08-22-2016, 02:53 AM
love it and interesting on catchcan placement

BoostedK20
09-13-2016, 04:54 PM
Jaw dropping!!

marsman328
10-06-2016, 05:08 PM
Thanks guys!

Spoolin_VTEC
11-04-2016, 08:13 AM
Sheepey does such awesome work. Any updates? Winter build ideas?