PDA

View Full Version : jusabase 1/2 mile monster build



Jus abase
11-21-2015, 04:05 PM
So not a lot of super competitive 1/2 mile roll Hondas out there. I mean beating twin turbo lambo. Alfa gtrs. Etc...
So this will be aimed at a 200mph goal. Not reving more than 8500rpm.


Precision 6765 turbo
Brms sidewinder
Ammfab custom 3" ic pipe
Hks 60mm gate
Twin ssqv
https://scontent-lax3-1.xx.fbcdn.net/hphotos-xta1/v/t1.0-9/fr/cp0/e15/q65/12308253_971639762893092_4377275428451535873_n.jpg ?efg=eyJpIjoidCJ9&oh=5e4ff4d1fcaadb28ea8a96c0577a0aeb&oe=56E8EF37
https://scontent-lax3-1.xx.fbcdn.net/hphotos-xaf1/v/t1.0-9/12234846_967320399991695_1538270634173758668_n.jpg ?efg=eyJpIjoidCJ9&oh=79c95cd56dabae88e76f3fba0520fc67&oe=56E880AD
https://scontent-lax3-1.xx.fbcdn.net/hphotos-xtp1/t31.0-8/12238523_967319343325134_1576998877920480144_o.jpg ?efg=eyJpIjoidCJ9


Darton mid sleeve k24
Turbo tuff I beams
Wiseco 10.2:1 pistons
Upgraded tool steel wrist pins
Acl bearings
A2 oil pump
https://scontent-lax3-1.xx.fbcdn.net/hphotos-xft1/v/t1.0-9/12310718_969546263102442_3097273840845863539_n.jpg ?efg=eyJpIjoidCJ9&oh=674ef889025a262863d9f09de6c3aa37&oe=56E61270
https://scontent-lax3-1.xx.fbcdn.net/hphotos-xfp1/v/t1.0-9/12314037_969546213102447_4836695731569640738_n.jpg ?efg=eyJpIjoidCJ9&oh=3c6a1a97173e1aeb932bb201f1ec014a&oe=56DE6332
https://scontent-lax3-1.xx.fbcdn.net/hphotos-xpa1/v/t1.0-9/12274453_969546233102445_8113585947239360208_n.jpg ?efg=eyJpIjoidCJ9&oh=84924323331b7c83d0ffab3741bec786&oe=56EFEC78


Je pro seal hg
ARP head studs
Supertech 95lb springs
Supertech dish valves
Stock tsx cams


Nitto nt05r 315/35r17
Ksport suspension
Stock type s axles
Stoptech drilled and slotted rotors

Before pull and roll
https://scontent-lax3-1.xx.fbcdn.net/hphotos-xfp1/t31.0-8/12239141_962849590438776_2613510232281298540_o.jpg ?efg=eyJpIjoidCJ9
After
https://scontent-lax3-1.xx.fbcdn.net/hphotos-xpf1/v/t1.0-9/12243322_962517353805333_2348923919888850293_n.jpg ?efg=eyJpIjoidCJ9&oh=242ed358ea5208f52481517d2c36b6ae&oe=56E8D88F
https://scontent-lax3-1.xx.fbcdn.net/hphotos-xlp1/t31.0-8/12244760_967318439991891_6459536187431251235_o.jpg ?efg=eyJpIjoidCJ9
8-900hpa

Si Speed 317
11-22-2015, 12:09 PM
So not a lot of super competitive 1/2 mile roll Hondas out there. I mean beating twin turbo lambo. Alfa gtrs. Etc...
So this will be aimed at a 200mph goal. Not reving more than 8500rpm.

S366 turbo
Brms sidewinder
Ammfab custom 3" ic pipe
Hks 60mm gate
Twin ssqv

Darton mid sleeve k24
Turbo tuff I beams
Wiseco 10.2:1 pistons
Upgraded tool steel wrist pins
Acl bearings
A2 oil pump

Je pro seal hg
ARP head studs
Supertech 95lb springs
Supertech dish valves
Stock tsx cams

8-900hpa

Hell yea!! I love it. How much is done already and how much is left to be done? Any pics?

Now I have some questions: How much do TT lambos/GTRs weigh? Because if they're pushing 1600whp and you're pushing 800whp, you should be about half their weight to match them. Of course, that doesn't involve gearing and whatnot. But it's whp to whp. Also, what is the terrain that will be driven on? I assume blacktop. What are you planning for tires, slicks/skinnies setup?

Jus abase
11-22-2015, 01:35 PM
So far I have the complete turbo kit. I made 625/460@17 psi in my old build.

Supertech pistons 11.5:1
Eagle rods
Acl bearings
Stock a2 head
Stock RBC
Stock tab

Jus abase
11-22-2015, 02:13 PM
If you look up gringoteg he is the only Honda that's competative and he was at 7xx 8xx hp. Terrain is a runway. U can look up no fly zone az, or racewars az. Same air strip

Spoolin_VTEC
11-23-2015, 10:26 PM
So far I have the complete turbo kit. I made 625/460@17 psi in my old build.

Supertech pistons 11.5:1
Eagle rods
Acl bearings
Stock a2 head
Stock RBC
Stock tab

This my shit! Love this build. Been saying this for years now. gringoteg is serious with this. Was he a K guy or a B? Definitely IN for this build updating goodness.

Jus abase
11-23-2015, 10:29 PM
He is b series but RSX and teg are similar in size and weight. I'll be doing a k24 with sleeves also. Let's see what my turbo can push.

BoostedK20
11-26-2015, 11:52 AM
Same turbo as PetefromtheStreets I believe. Should push some nice numbers, especially with e85. What's your fuel setup?

Jus abase
11-27-2015, 11:59 AM
Single dw300 in tank feeding 3l surge tank. Twin dw350il twin -8 to single -10 feed lines. -6 return. Id2000 inj. Aeromotive a1000 fpr.

Si Speed 317
11-27-2015, 02:04 PM
Single dw300 in tank feeding 3l surge tank. Twin dw350il twin -8 to single -10 feed lines. -6 return. Id2000 inj. Aeromotive a1000 fpr.

That sure is enough fueling for your power goals. Awesome. Would have loved to see SFI injectors rather than ID though. Better bang for your buck. Just my :2c:

Jus abase
11-27-2015, 03:13 PM
My buddy had these id2000 from his supercharged s2000. Got em for $400 and had to buy k series top hats. That's bang for the buck.

Si Speed 317
11-27-2015, 03:56 PM
My buddy had these id2000 from his supercharged s2000. Got em for $400 and had to buy k series top hats. That's bang for the buck.

That sure is a bang for the buck. Thought you bought em new. Good stuff Codey

Jus abase
11-27-2015, 04:00 PM
They had 5-6 dyno pulls on em before the motor spun a bearing. Something happend to his oil pump. I swooped em up quick

Jus abase
12-05-2015, 01:46 PM
Switched things up. My s366 was cast wheel. Got a billet 6765. Let's see what it can push

Si Speed 317
12-05-2015, 02:42 PM
Switched things up. My s366 was cast wheel. Got a billet 6765. Let's see what it can push

Hell yea! Just a new wheel or the entire turbo?

Edit: Nvm I see the 1st post updated, you got a diff turbo. 6765 should make some serious power!

Jus abase
12-05-2015, 04:32 PM
Its gonna try lol. Should be goodnfor my goals.

BoostedK20
12-09-2015, 10:56 PM
Its gonna try lol. Should be goodnfor my goals.

Billet 6765 is no slouch! Should definitely be good for your goals. If you don't mind me asking, did you get a deal on it or buy it new?

Jus abase
12-09-2015, 10:59 PM
Guy put 200 miles on it and took it out because he wanted a s366. So I traded my s366 cast wheel for this billet 6765. I paid 500 for the s366. So I got a decent deal seeing how the 6765 is 1300 brand new

BoostedK20
12-09-2015, 11:01 PM
Guy put 200 miles on it and took it out because he wanted a s366. So I traded my s366 cast wheel for this billet 6765. I paid 500 for the s366. So I got a decent deal seeing how the 6765 is 1300 brand new

Straight up trade? How does the turbo check out? I guess it was too late of a spool?

Jus abase
12-09-2015, 11:03 PM
Na just wanted the billet wheel. So I was either gonna buy a billet wheel for the s366 or trade. This turbo is brand new

BoostedK20
12-09-2015, 11:14 PM
Na just wanted the billet wheel. So I was either gonna buy a billet wheel for the s366 or trade. This turbo is brand new

I was referring to the guy who swapped after 200 miles. Great steal of a deal, looking forward to this!

boosted_teg
12-10-2015, 03:30 AM
ballbearing or journal?

Spoolin_VTEC
12-10-2015, 10:20 AM
I thought you were talking about the Comp 6765 for a minute! Either way, nice turbo!

Jus abase
12-10-2015, 11:34 AM
He had an s2000. And the oil pressure is known to blow those seals. So he didn't want it after he found out the s2000 oil pressure was gonna ruin it. So he wanted the s366.

Jus abase
12-10-2015, 11:35 AM
Billet journal 6765

Spoolin_VTEC
12-16-2015, 11:43 PM
He had an s2000. And the oil pressure is known to blow those seals. So he didn't want it after he found out the s2000 oil pressure was gonna ruin it. So he wanted the s366.

Hell of a deal. So hows the build going so far? What's next?

Jus abase
12-18-2015, 12:33 PM
So I had my second child last week on wed. So kids a pause for a second. Still debating trans options. But first and foremost is going to be block sleeving and hood dump fabrication. I weld so hood dump should be sooner than later. Sleeving will hopefully happen within the next couple months. I'm selling my old built longblock for a stock 06 tsx long block and cash. So that cash will pay for my sleeves and block work.

Spoolin_VTEC
12-20-2015, 11:54 PM
So I had my second child last week on wed. So kids a pause for a second. Still debating trans options. But first and foremost is going to be block sleeving and hood dump fabrication. I weld so hood dump should be sooner than later. Sleeving will hopefully happen within the next couple months. I'm selling my old built longblock for a stock 06 tsx long block and cash. So that cash will pay for my sleeves and block work.

CONGRATULATIONS!!! And sounds good! I'm looking forward to this! Post up some pics of your welding skills when you have time. God bless

Jus abase
12-20-2015, 11:56 PM
I may trade my 6765 for a gt4594r so I'm not going to build a up pipe until I decide

Spoolin_VTEC
12-21-2015, 12:02 AM
I may trade my 6765 for a gt4594r so I'm not going to build a up pipe until I decide

Going bigger and bigger! That's a 1,200hp+ rated turbo isn't it?

Jus abase
12-21-2015, 12:04 AM
Idk its a 72mm turbo. Twin ball bearing. Idk flow rates so idk power potential

BoostedK20
12-21-2015, 12:20 AM
Idk its a 72mm turbo. Twin ball bearing. Idk flow rates so idk power potential

That sure is a big boy turbo. Would be cool to see that happen. I had a GT42RS, was rated to 1000hp. IIRC it was a 74mm inducer, 102mm exducer. Spool was NUTS. The 4594R is also right around the 4 digit mark. Much more driveable IMHO over the 42RS. Different powerband and potential, flow rates as well. Looking forward to that! And congratulations as well on your second child!! God bless!

Jus abase
12-21-2015, 12:22 AM
I'm only holding back because there is very limited info on the gt4594r

Jus abase
12-21-2015, 12:30 AM
Typo gt4294r

BoostedK20
12-22-2015, 11:43 PM
GT42R is a nice turbo for sure though. Still would be a great build!

Si Speed 317
12-26-2015, 10:55 AM
GT42R would be a nice setup! IMO not the best for a street car (although now pro mods are street cars lol) but great for a track setup! Looking forward to this!

Jus abase
12-28-2015, 10:50 AM
Well looks like I'm sticking with the 6765. Hoping to make 850ish with it. Next step is block assembly. Stay tuned fellow boostedk20 brothers

BoostedK20
12-28-2015, 08:48 PM
Tuned I am brother :thumb: