PDA

View Full Version : PFTS is finally going turbo



PetefromtheStreets
04-25-2015, 07:40 PM
Like the title says I'm finally going turbo.

After fighting with the car for years and dreaming to set records I had to give up on my supercharger nonsense. I've been at it since 2010 with the Rotrex supercharger and have had my fill of the fun it has to offer.

Once I put PPG's in the trans I pretty much decided I was fighting an uphill battle.

After 3 built motors and 3 gearsets I've deemed it time to move on.

I will not state power or time goals as they aren't needed.

My previous setup made 530hp/404trq
Ran an 11.90 @124.36mph.
1.96 60ft. Ewww

Now its time to simply make more and go faster.

The motor is built and sleeved along with the trans being built.

I'm currently in the parts collection stage as I recently sold my Rotrex blower setup.

Onto the pictures

Chime in with opinions or questions alike...


Say goodbye to the blower..
http://images.tapatalk-cdn.com/15/04/25/ae6d8d0966642224b0f2e98883ced127.jpg

My PTE66 gate!
http://images.tapatalk-cdn.com/15/04/25/6525cc0273ccf9a39960e182eb7f3c21.jpg

The turbo of choice
Can't go wrong with a Borg.
http://images.tapatalk-cdn.com/15/04/25/dfb85a8c043a5941de11a78238b44d9b.jpg

And me messing around with the turbo
http://images.tapatalk-cdn.com/15/04/25/afdf7dbde13065bc75ef64fad0a77556.jpg

Waiting on my:
Fmic
4 port Boost controller
Turbo manifold- by Turbo Elements

And fab work to be done....
Stay tuned

ryaano18
04-26-2015, 12:48 AM
Hellllllllllllllllllllllssssssssssssssssssssssssss yeaaaaaaaaaaaaaaaaaaaaaaaaa :)

BoostedK20
04-26-2015, 07:24 PM
Awesome!!! This is very promising! :spaz::heart:

I'm sad to see the Rotrex setup go. Maybe it'll be back one day with the turbo on the car :iorun:

dkpr87
04-27-2015, 12:01 PM
Me when a friend goes Turbo

http://i143.photobucket.com/albums/r135/ArmyDude87/Yesss%20Yesssss_zps9yepkosb.jpg

monjarassi
04-28-2015, 02:10 AM
Finally man. Great choice of turbo, even doh im a sucker for PTE

PetefromtheStreets
04-28-2015, 08:37 PM
Hellllllllllllllllllllllssssssssssssssssssssssssss yeaaaaaaaaaaaaaaaaaaaaaaaaa :)
Yessir!

Awesome!!! This is very promising! :spaz::heart:

I'm sad to see the Rotrex setup go. Maybe it'll be back one day with the turbo on the car :iorun:
Thanks man. I had my fun. Time to experience New fun lol

Me when a friend goes Turbo

http://i143.photobucket.com/albums/r135/ArmyDude87/Yesss%20Yesssss_zps9yepkosb.jpg
Lmao

Finally man. Great choice of turbo, even doh im a sucker for PTE
Thanks man. That PTE stuff is pricey

dkpr87
04-28-2015, 08:40 PM
PTE is good, but bang for buck BW FTW

PetefromtheStreets
04-28-2015, 08:40 PM
Fmic came in today.

She's a beast
http://images.tapatalk-cdn.com/15/04/28/24baba5e7aa0cd314b62dd0383fc0f68.jpghttp://images.tapatalk-cdn.com/15/04/28/f9a14625ff8926f68696833c8d6b3a28.jpghttp://images.tapatalk-cdn.com/15/04/28/c59f724cb346a04b55a4d33fcc246884.jpghttp://images.tapatalk-cdn.com/15/04/28/bf0126e93766bd35dc3b160f2ad36185.jpghttp://images.tapatalk-cdn.com/15/04/28/5472c0c667e54202ca34c42db65d34c6.jpg

Baffled and all!

PetefromtheStreets
04-28-2015, 08:43 PM
PTE is good, but bang for buck BW FTW
I'm being told to Send it to bullseye for their billet upgrade

dkpr87
04-29-2015, 10:10 AM
I'm being told to Send it to bullseye for their billet upgrade

I just took at it.... i like....

but i'm gonna run with this for a while and see how it goes ;-)

PetefromtheStreets
04-29-2015, 10:32 AM
I just took at it.... i like....

but i'm gonna run with this for a while and see how it goes ;-)
Same here I'll do a 67 if I upgrade

dkpr87
04-29-2015, 10:55 AM
Same here I'll do a 67 if I upgrade

I'm going EFR after this setup

PetefromtheStreets
04-29-2015, 10:56 AM
I'm going EFR after this setup
I have only seen 660 on an efr car tho

dkpr87
04-29-2015, 11:09 AM
I have only seen 660 on an efr car tho

Which EFR Turbo though?

PetefromtheStreets
04-29-2015, 11:13 AM
Which EFR Turbo though?
Not sure to be honest.

dkpr87
04-29-2015, 11:18 AM
http://www.full-race.com/store/efr-turbos/borgwarner-efr-9180-turbo-1.html

this is the one i want :fyea:

PetefromtheStreets
04-29-2015, 11:44 PM
http://www.full-race.com/store/efr-turbos/borgwarner-efr-9180-turbo-1.html

this is the one i want :fyea:
Looks like a badass complicated looking turbo lol. Built in bov? Say waaaaaaa?

dkpr87
04-29-2015, 11:56 PM
Looks like a badass complicated looking turbo lol. Built in bov? Say waaaaaaa?
Yessir!!!! Twin gated internal BOV :D :eek:

PetefromtheStreets
04-30-2015, 10:31 AM
Yessir!!!! Twin gated internal BOV :D :eek:
That's wild lol

PetefromtheStreets
04-30-2015, 10:42 AM
Not a major update but my plugs came inhttp://images.tapatalk-cdn.com/15/04/30/3aea807274f69d90e6356852c0ba4230.jpg

And my turbo manifold heat wrap came in
http://images.tapatalk-cdn.com/15/04/30/b908074d4c7a32d98aa66664b10b574e.jpg

dkpr87
04-30-2015, 11:19 AM
Not a major update but my plugs came inhttp://images.tapatalk-cdn.com/15/04/30/3aea807274f69d90e6356852c0ba4230.jpg

One step closer!

monjarassi
04-30-2015, 04:38 PM
Don't wrap it show of them welds

PetefromtheStreets
04-30-2015, 04:44 PM
Don't wrap it show of them welds
I'll take lots of pics before it's wrapped but I'm wrapping that bish all the way up. Lol

dkpr87
05-04-2015, 09:28 AM
I'll take lots of pics before it's wrapped but I'm wrapping that bish all the way up. Lol

I'm doing a ceramic coating on mine to help with the heat, does the wrap really help??

PetefromtheStreets
05-04-2015, 09:46 AM
I'm doing a ceramic coating on mine to help with the heat, does the wrap really help??
Yes. The heat wrap is proven to lower under hood temps. Not to say ceramic doesn't I just don't have experience with the coatings.

dkpr87
05-04-2015, 05:47 PM
Yes. The heat wrap is proven to lower under hood temps. Not to say ceramic doesn't I just don't have experience with the coatings.

I've always wanted to know LOL

PetefromtheStreets
05-05-2015, 07:47 AM
Turbo blanket and gold tape came in yesterday. So of course I put the blanket on the turbo lol
http://images.tapatalk-cdn.com/15/05/05/b1f17320a22851f25281da6b951be797.jpg
http://images.tapatalk-cdn.com/15/05/05/1c644eed578423840d4c81d036657173.jpghttp://images.tapatalk-cdn.com/15/05/05/dad2a3ca3e358e93476e2ffa051d80bd.jpghttp://images.tapatalk-cdn.com/15/05/05/cbeddf0818c884682298e54a520997aa.jpg

Going to start prepping the bay for turbo install soon. Manifold is another 2 weeks out I believe.

PetefromtheStreets
05-05-2015, 09:51 PM
For my downpipe I bought the PLM sidewinder downpipe as a starting point as it's only 200 bucks. So I'll need to do is cut off the section where it buckles down to 2.5" and weld on my borg warner boostlab adapter and I should be good to go.. I'll also need to weld a vband onto the end of the dp to connect to the rest of my exhaust.

http://images.tapatalk-cdn.com/15/05/05/2e13b4531208405f38acb518cb9fef37.jpg

dkpr87
05-05-2015, 10:23 PM
For my downpipe I bought the PLM sidewinder downpipe as a starting point as it's only 200 bucks. So I'll need to do is cut off the section where it buckles down to 2.5" and weld on my borg warner boostlab adapter and I should be good to go.. I'll also need to weld a vband onto the end of the dp to connect to the rest of my exhaust.

http://images.tapatalk-cdn.com/15/05/05/2e13b4531208405f38acb518cb9fef37.jpg
So jelly... nobody makes downpipes for EGs

PetefromtheStreets
05-07-2015, 01:24 PM
So jelly... nobody makes downpipes for EGs
I'll have to Modify it to got with my turbo and exhaust but its a general starting point

PetefromtheStreets
05-07-2015, 01:25 PM
My stainless zipties cane in today for my header wrap. Lots and lots of them. Lolhttp://images.tapatalk-cdn.com/15/05/07/1397fa2f7cef64ec57c3f43ea9f36917.jpg

dkpr87
05-07-2015, 04:23 PM
All the zip ties.....

aLmk
05-08-2015, 02:33 PM
O snap! sub'd

PetefromtheStreets
05-12-2015, 09:15 PM
O snap! sub'd
Thanks buddy. In the process of ordering s2 ultra and 10 spacer. Damn tb cost half of what the manifold does. Lol

mnc1408
05-13-2015, 01:27 PM
fook yes, cant wait!!!

PetefromtheStreets
05-13-2015, 06:53 PM
fook yes, cant wait!!!
Thanks man!

PetefromtheStreets
05-13-2015, 06:54 PM
Sold my xcessive intake manifold and 74mm throttle body.

http://images.tapatalk-cdn.com/15/05/13/369323c4a1fc55f2bfdd7a88e355ae29.jpg
http://images.tapatalk-cdn.com/15/05/13/1e01fa797e06c74100605f2a624bf37a.jpg

Ordered s2 ultra and 90mm tb

monjarassi
05-13-2015, 11:41 PM
Sweet best of luck with that im

PetefromtheStreets
05-15-2015, 02:27 PM
IM and throttle body are in!

Skunk2 ultra with skunk2 90mm tb
http://images.tapatalk-cdn.com/15/05/15/860b5fe7bf9eabbdcb5693e8c7a560cc.jpghttp://images.tapatalk-cdn.com/15/05/15/d02c54179f698d63655bea385fce676e.jpghttp://images.tapatalk-cdn.com/15/05/15/7fe7b95d8343f355c06ead9ae002d562.jpg
http://images.tapatalk-cdn.com/15/05/15/3ebacddd060ea48e8619cfc4b1977861.jpghttp://images.tapatalk-cdn.com/15/05/15/2191f37ed3c3bfbb554f2962487b877a.jpghttp://images.tapatalk-cdn.com/15/05/15/1f77841cb3ac6b0c6b11d96ee5a7a3d8.jpghttp://images.tapatalk-cdn.com/15/05/15/19c25c8df2779f78f73a42fd0e0a07ef.jpghttp://images.tapatalk-cdn.com/15/05/15/31ed98ab6cb70c62530cdce8f9e5e17f.jpg

BOSS!

Have to order a new ps/ac elim kit as my ep3 idler won't fit with this massive manifold.

Ordering a space for it soon before fab work is done

dkpr87
05-15-2015, 02:50 PM
IM and throttle body are in!

Skunk2 ultra with skunk2 90mm tb
http://images.tapatalk-cdn.com/15/05/15/860b5fe7bf9eabbdcb5693e8c7a560cc.jpghttp://images.tapatalk-cdn.com/15/05/15/d02c54179f698d63655bea385fce676e.jpghttp://images.tapatalk-cdn.com/15/05/15/7fe7b95d8343f355c06ead9ae002d562.jpg
http://images.tapatalk-cdn.com/15/05/15/3ebacddd060ea48e8619cfc4b1977861.jpghttp://images.tapatalk-cdn.com/15/05/15/2191f37ed3c3bfbb554f2962487b877a.jpghttp://images.tapatalk-cdn.com/15/05/15/1f77841cb3ac6b0c6b11d96ee5a7a3d8.jpghttp://images.tapatalk-cdn.com/15/05/15/19c25c8df2779f78f73a42fd0e0a07ef.jpghttp://images.tapatalk-cdn.com/15/05/15/31ed98ab6cb70c62530cdce8f9e5e17f.jpg

BOSS!

Have to order a new ps/ac elim kit as my ep3 idler won't fit with this massive manifold.

Ordering a space for it soon before fab work is done

Remember to cap off that MAP Sensor hole ;-)

PetefromtheStreets
05-15-2015, 02:51 PM
You know it Lmfaooo!

PetefromtheStreets
05-18-2015, 12:46 PM
So after looking in the manifold and seeing all the casting marks I cant just let them sit. Especially while I am still waiting on My turbo manifold to arrive. So I have started to sand and polish them out. http://images.tapatalk-cdn.com/15/05/18/226232594a394f68d32232dd16143ca7.jpghttp://images.tapatalk-cdn.com/15/05/18/75bfd07890d19c45ed6a8b83a81a6181.jpghttp://images.tapatalk-cdn.com/15/05/18/235c1a72e2ae2a271cfb8a2fb58245eb.jpghttp://images.tapatalk-cdn.com/15/05/18/3faf72d079edf8a84ee0d91af79b2acf.jpghttp://images.tapatalk-cdn.com/15/05/18/0d9be814a9a6cdbadd86859fa5cb3f3f.jpghttp://images.tapatalk-cdn.com/15/05/18/1eaa61d339e7fbbe717b426c07ca1738.jpg

dkpr87
05-18-2015, 01:50 PM
This last update got me like...

:fyea: :fyea: :fyea:

PetefromtheStreets
05-18-2015, 11:31 PM
This last update got me like...

:fyea: :fyea: :fyea:
Aww yea. Thanks man

PetefromtheStreets
05-18-2015, 11:31 PM
So I got around to doing some more clean up on the intake manifold.

Enjoy...
http://images.tapatalk-cdn.com/15/05/18/9d3320670ed0ef6dccdc4f70fc9857f8.jpg
http://images.tapatalk-cdn.com/15/05/18/155765595b971fcf5e0a74891ee6be5e.jpg
http://images.tapatalk-cdn.com/15/05/18/baba42d2f5424f3238590a3ec2749b10.jpghttp://images.tapatalk-cdn.com/15/05/18/69b498504d124d9ffb6d156749c9f3ca.jpghttp://images.tapatalk-cdn.com/15/05/18/eb27dadcb0279c7ccd4e92addd76a72e.jpg

monjarassi
05-21-2015, 12:27 AM
Get-r-done

PetefromtheStreets
05-21-2015, 12:36 AM
Get-r-done
And she's done. Well....the runners are. I've done about as much as I want to without going perfectly smooth. Now its time to focus on the plenum side.

http://images.tapatalk-cdn.com/15/05/20/a4f34a35b69e4338027d128592b4fb34.jpghttp://images.tapatalk-cdn.com/15/05/20/000e6f727282d311be05759cda9fe51b.jpghttp://images.tapatalk-cdn.com/15/05/20/571ed2460c70afec08f7f6079d8e5be6.jpg

monjarassi
05-21-2015, 12:41 AM
Fawk yea

PetefromtheStreets
05-24-2015, 01:32 AM
So a friend of mine has a high hp evo. He was talking to me about his boost controller heating up and shutting off. I'm not sure of the cause wither that be it or not, but I decided I had plenty I'd time to kill as I wait on My turbo manifold. So I too my DEI velcro heat sleeve and put it around the 4 port boost controller to try and help this. Plus I was bored and just wanted to do it.

http://images.tapatalk-cdn.com/15/05/23/65ee50b70727f80379182af637d725ec.jpg
http://images.tapatalk-cdn.com/15/05/23/36a361023238679e24861233318739e5.jpg
http://images.tapatalk-cdn.com/15/05/23/abeba68f9ada7d5ed18cdca6bf569a56.jpg

monjarassi
05-25-2015, 09:03 PM
What a big mouth on that gate

dkpr87
05-26-2015, 03:47 PM
Hey Pete.... you know what i love to do.... wait.....

PetefromtheStreets
05-26-2015, 03:48 PM
Hey Pete.... you know what i love to do.... wait.....
Me too but I'm tired of waiting

dkpr87
05-26-2015, 04:06 PM
Me too but I'm tired of waiting

Bro... been at this since January... tell me about it....

i feel i should've traded you my kit for your kit and we'd be happy campers LOL

PetefromtheStreets
05-26-2015, 04:07 PM
Bro... been at this since January... tell me about it....

i feel i should've traded you my kit for your kit and we'd be happy campers LOL
January? Wish I would have known that. I wouldn't have bought from him smh.

dkpr87
05-26-2015, 04:15 PM
January? Wish I would have known that. I wouldn't have bought from him smh.

To be honest bro, the first mani came in fine, it's just we had a miscommunication and had to send it back for some alteration, that's all fine and dandy, but the wait since has been pretty brutal, and i didn't think to even say anything since he was communicating pretty frequently with me... however had a known then what i know now... yeeeeeaaaa.....

PetefromtheStreets
05-27-2015, 11:19 PM
After my son's baseball game I decided to take a look at this massive fmic I the car. Just to get an idea...

http://images.tapatalk-cdn.com/15/05/27/769fbe4329e4e53278f07431ce023bd7.jpghttp://images.tapatalk-cdn.com/15/05/27/71e41520dbc64429141f9d0e43b491fb.jpg

Well she is a beast. The shop will have the task of mounting and piping once the turbo manifold comes in.

PetefromtheStreets
06-01-2015, 09:38 AM
Big boy throttle body problems...

B series tps sensor and pigtail came in today.
http://images.tapatalk-cdn.com/15/06/01/b3fb91e043bdab346a34a674f8f6c02e.jpg

BoostedK20
06-03-2015, 10:45 AM
Bro... been at this since January... tell me about it....

i feel i should've traded you my kit for your kit and we'd be happy campers LOL


January? Wish I would have known that. I wouldn't have bought from him smh.

Gentlemen, I truly take pride of my position in this community because it enables me to help with problems related to your builds lives, etc. This includes fabrication issues. If someone is taking too long to create a piece that should have been completed already (several months) please PM me privately about the situation. Together, we will make it work. I have access to some of the best fabricators in the business, and they would love to help in any way they can.

Big boy throttle body problems...

B series tps sensor and pigtail came in today.
http://images.tapatalk-cdn.com/15/06/01/b3fb91e043bdab346a34a674f8f6c02e.jpg

Mustang adapter problems?

PetefromtheStreets
06-03-2015, 11:06 AM
Gentlemen, I truly take pride of my position in this community because it enables me to help with problems related to your builds lives, etc. This includes fabrication issues. If someone is taking too long to create a piece that should have been completed already (several months) please PM me privately about the situation. Together, we will make it work. I have access to some of the best fabricators in the business, and they would love to help in any way they can.


Mustang adapter problems?
Mustang bolt pattern. But b series tps sensor and pigtail. Lol


And as for the manifold I spoke with him today. It "ships" tomorrow.

PetefromtheStreets
06-21-2015, 11:23 PM
So I've been sitting a a stand still a couple weeks. Ive got a few things coming in still.

Aem 5 bar map sensor and pigtail.

Ktuned water pump block off plate.

And a Turbo manifold. (Going through tough times with this)

I painted my intake manifold flat black and installed a skunk2 1L spacer in it as well.
http://images.tapatalk-cdn.com/15/06/21/5e9c6aec6d140948b18548d11a6778f0.jpg

I removed the old water pump housing, idler, tensioner and alternator.
http://images.tapatalk-cdn.com/15/06/21/14f644778b90d00cad7da11058d6ac3d.jpg
http://images.tapatalk-cdn.com/15/06/21/9417568f762be81e219be6e83e84e1c4.jpghttp://images.tapatalk-cdn.com/15/06/21/0d9e56f4d894b80f4f6bc6b5aadb0e03.jpghttp://images.tapatalk-cdn.com/15/06/21/19ec9505b1dc6d54e22d4f2bda3db986.jpg

Installed the intake manifold on the car now that the water pump housing doesn't make contact.
http://images.tapatalk-cdn.com/15/06/21/1764e993b49e1bd0edeea447779db315.jpg

http://images.tapatalk-cdn.com/15/06/21/1e7b0c5c13e7e117cf631d10358d8b72.jpg
http://images.tapatalk-cdn.com/15/06/21/775faca5c267c329a8ce649fd0619bbc.jpg
http://images.tapatalk-cdn.com/15/06/21/0cff36aae3075d30b23c40c2be2b1d85.jpg

As for the turbo manifold I'm at a stand still currently. Problem after problem. Need that to really start working on placement of everything.

Hope you guys enjoy.

Sent from my SAMSUNG-SM-G900A using Tapatalk

PetefromtheStreets
07-06-2015, 09:38 AM
Been doing small things here and there to pass the time while waiting in a turbo manifold. Ended up getting my money back after receiving the run around for a few weeks about shipping. Thank you PayPal...

So the small things I've been doing is relocating the fuse box like the rest of the guys do. Looks a lot cleaner for sure.

And made a boost controller bracket.

Ppl usually ziptie them but I've got time. Lol and tools. So I made one up

http://images.tapatalk-cdn.com/15/07/06/026c2514a316ab4310770fd0756e2d04.jpg
http://images.tapatalk-cdn.com/15/07/06/9e36b67378cde56c774186e0c371167e.jpg
http://images.tapatalk-cdn.com/15/07/06/7d6225950ddaa8b17d93ca74fd1b105e.jpg
http://images.tapatalk-cdn.com/15/07/06/604889bd71db4e7c2a3149815710d7fe.jpg
http://images.tapatalk-cdn.com/15/07/06/c9089ef8b079525d9237068b0682b418.jpg

Just need to cut it out and clean it up.

Screw size used was a 4-40 x 1"

Also wired in my alternate speed sensor input And PWM booster.

Waiting on new manifold and intercooler piping to be made. Gonna be a couple weeks for that part.

Sent from my SAMSUNG-SM-G900A using Tapatalk

dkpr87
07-09-2015, 03:53 PM
Been doing small things here and there to pass the time while waiting in a turbo manifold. Ended up getting my money back after receiving the run around for a few weeks about shipping. Thank you PayPal...

So the small things I've been doing is relocating the fuse box like the rest of the guys do. Looks a lot cleaner for sure.

And made a boost controller bracket.

Ppl usually ziptie them but I've got time. Lol and tools. So I made one up

http://images.tapatalk-cdn.com/15/07/06/026c2514a316ab4310770fd0756e2d04.jpg
http://images.tapatalk-cdn.com/15/07/06/9e36b67378cde56c774186e0c371167e.jpg
http://images.tapatalk-cdn.com/15/07/06/7d6225950ddaa8b17d93ca74fd1b105e.jpg
http://images.tapatalk-cdn.com/15/07/06/604889bd71db4e7c2a3149815710d7fe.jpg
http://images.tapatalk-cdn.com/15/07/06/c9089ef8b079525d9237068b0682b418.jpg

Just need to cut it out and clean it up.

Screw size used was a 4-40 x 1"

Also wired in my alternate speed sensor input And PWM booster.

Waiting on new manifold and intercooler piping to be made. Gonna be a couple weeks for that part.

Sent from my SAMSUNG-SM-G900A using Tapatalk

But why all this little tedious stuff... still gonna smoke you tho... LMFAO jk jk bro

good to see someone paying attention to detail and tending to the little things :-) can't wait to see your new mani :-)

PetefromtheStreets
07-14-2015, 01:33 PM
But why all this little tedious stuff... still gonna smoke you tho... LMFAO jk jk bro

good to see someone paying attention to detail and tending to the little things :-) can't wait to see your new mani :-)
Lol I know you will. Cant wait to see the new manifold either. Gonna be sick. Stay tuned

Sent from my SM-T320 using Tapatalk

PetefromtheStreets
07-31-2015, 11:50 AM
Ok so my cars been at the shop a couple weeks now. They have a back log to get caught up on sho I'm not stressing about it. The guy has now placed the turbo in the bay with brackets. So he's started making the collector for it. He's waiting on my head flange to arrive to start working on the runners. In the mean time he's mounted my intercooler and getting ideas for pipe routing.

Here's what pics I have so far...
http://images.tapatalk-cdn.com/15/07/31/373ef67daa699eed85ec4d3b3d649ce1.jpg
http://images.tapatalk-cdn.com/15/07/31/52867d8637d9c019d5dfd81e2e6954c2.jpg

I will be headed by the shop today to grab a couple other pics and to discuss piping and dp options.

Getting there guys. Slowly but surely

Sent from my SAMSUNG-SM-G900A using Tapatalk


Sent from my SAMSUNG-SM-G900A using Tapatalk

PetefromtheStreets
08-11-2015, 12:47 AM
Ok so I have received this much from the fan guy so far...

Manifold collector has been started...
http://images.tapatalk-cdn.com/15/08/10/a23d56e18367c56104ea1e94dd215c6c.jpg

And he's started on piping....I'm pretty stoked about the cold side pipe right now. Looks really good. Nice short piping and looks good paired with the 90mm tb being the piping is 3.5".

http://images.tapatalk-cdn.com/15/08/10/7764b53e8d347255512eddd8c50e343b.jpg

I hope to have more for updates later this week.

Enjoy! And thanks for looking

Sent from my SAMSUNG-SM-G900A using Tapatalk

dkpr87
08-12-2015, 12:50 PM
are you running 3.5" or 3" out of the turbo?

PetefromtheStreets
08-12-2015, 12:59 PM
are you running 3.5" or 3" out of the turbo?
I'm really hoping it's 3". Lol

Sent from my SAMSUNG-SM-G900A using Tapatalk

dkpr87
08-12-2015, 03:00 PM
I'm really hoping it's 3". Lol

Sent from my SAMSUNG-SM-G900A using Tapatalk

word

PetefromtheStreets
08-12-2015, 03:01 PM
word
Yea this guy isn't good with communication. But I heard he's good and he's local.

Sent from my SAMSUNG-SM-G900A using Tapatalk

dkpr87
08-12-2015, 03:53 PM
Yea this guy isn't good with communication. But I heard he's good and he's local.

Sent from my SAMSUNG-SM-G900A using Tapatalk

not like you cant go and see your car, communication is a big for me, but if the car is in town i'll just swing by and check it out

PetefromtheStreets
08-12-2015, 03:56 PM
not like you cant go and see your car, communication is a big for me, but if the car is in town i'll just swing by and check it out
Exactly. I also sent him a message when I seen the 3-3.5" 90 laying in the floor next to the fmic

Sent from my SAMSUNG-SM-G900A using Tapatalk

dkpr87
08-12-2015, 04:24 PM
Exactly. I also sent him a message when I seen the 3-3.5" 90 laying in the floor next to the fmic

Sent from my SAMSUNG-SM-G900A using Tapatalk

I think i may have to go 3.5 step down to 3... i dont want to though LOL

PetefromtheStreets
08-12-2015, 04:26 PM
I think i may have to go 3.5 step down to 3... i dont want to though LOL
I ran 3.5" from fmic to tb. But only want 3" from fmic to turbo.

I didn't want a 3" pipe going to that large ass tb. I wanted to taper the pipe put full 3.5 for that short of a section will do

Sent from my SAMSUNG-SM-G900A using Tapatalk

dkpr87
08-12-2015, 04:44 PM
I'm talking about the exhaust bruh :-P

My IC is mostly 3, except for the TB pipe thats 3.5

PetefromtheStreets
08-12-2015, 04:45 PM
I'm talking about the exhaust bruh :-P
Lol you didn't say that

Sent from my SAMSUNG-SM-G900A using Tapatalk

dkpr87
08-26-2015, 04:16 PM
Lol you didn't say that

Sent from my SAMSUNG-SM-G900A using Tapatalk

:trolls:

monjarassi
08-30-2015, 10:15 PM
Where we at need updates

PetefromtheStreets
08-30-2015, 11:22 PM
Where we at need updates
I'm calling the guy Wednesday for an update. There was one car in front of mine to be done.that car was supposed to be finished friday. He said after it was done that he could knock mine out. So I'm hoping that should be in the next week or 2.


Sent from my SM-T320 using Tapatalk

dkpr87
09-04-2015, 03:19 PM
I'm calling the guy Wednesday for an update. There was one car in front of mine to be done.that car was supposed to be finished friday. He said after it was done that he could knock mine out. So I'm hoping that should be in the next week or 2.


Sent from my SM-T320 using Tapatalk

Awesome man! hope to see pics!!! :spaz:

PetefromtheStreets
09-07-2015, 10:47 PM
Awesome man! hope to see pics!!! :spaz:
Not much for an update. ...guy said it'd be fine this week. so I'll be stopping by there Friday to see.

Sent from my SM-T320 using Tapatalk

monjarassi
09-08-2015, 12:19 AM
Let us know

PetefromtheStreets
09-22-2015, 11:25 AM
Manifolds current situation

http://images.tapatalk-cdn.com/15/09/22/c6edcba050f0d1b3175843ed6e751187.jpghttp://images.tapatalk-cdn.com/15/09/22/a97256cd93a8bec90b573241cd61a92b.jpghttp://images.tapatalk-cdn.com/15/09/22/a6465e658b662c3ef0bf6ea9e25fd958.jpg

Sent from my SAMSUNG-SM-G900A using Tapatalk

monjarassi
09-22-2015, 11:29 PM
Nice.....

vdubkilla
09-30-2015, 11:35 PM
Glad to see this man your gonna love that turbo power and it was good to see you an your son at Irev can't wait to see ya go down the track with the new set up !

BoostedK20
10-02-2015, 08:38 AM
Post the completed manifold picture later today after the server update!

PetefromtheStreets
10-02-2015, 08:47 AM
Glad to see this man your gonna love that turbo power and it was good to see you an your son at Irev can't wait to see ya go down the track with the new set up !

Thanks man. I can't wait to see what it's like. And yea man. It was good to see you too. I was burnt up the next day so I know you had to be. LOL

PetefromtheStreets
10-02-2015, 08:48 AM
Post the completed manifold picture later today after the server update!

Yessir. You know it. I'm waiting on some other pictures to be sent to me so I can post them all at once. When is the server update?

PetefromtheStreets
10-05-2015, 08:33 PM
Well the manifold has been completed. I go pick up the car Wednesday. Then I need to make some oil lines and swap out cams at some point. I can't wait. Should be running by next weekend.

http://images.tapatalk-cdn.com/15/10/05/0a0f60abf7a989f0fffb1bac626edb68.jpghttp://images.tapatalk-cdn.com/15/10/05/7f937103ed9bd85be5afd699d74e35a2.jpghttp://images.tapatalk-cdn.com/15/10/05/1d588dfd902bb87958a1a15da13424fd.jpg
Dat gate!

Sent from my iPhone using Tapatalk

PetefromtheStreets
10-07-2015, 10:03 PM
So I just got back home with the car.

She needs a couple things before it will fire up but I can be patient.

Anyways here are some pics...

http://images.tapatalk-cdn.com/15/10/07/ae9c36a257f94b5c8548a7e8f35013a1.jpghttp://images.tapatalk-cdn.com/15/10/07/3013795f2d78ddf0c4357f92dbf68916.jpghttp://images.tapatalk-cdn.com/15/10/07/ddfc2376bdc0123109b41f3d5c5cee96.jpghttp://images.tapatalk-cdn.com/15/10/07/cd5fdf75e7042c379d91b0de76621bcb.jpghttp://images.tapatalk-cdn.com/15/10/07/4a85cd5840d570335d2d74b16e97fada.jpghttp://images.tapatalk-cdn.com/15/10/07/61c9013d76df73ee6864cf88193a4d9b.jpg

I am beyond thrilled with the outcome so far. Just a few things need to be cleaned up and addressed before she's street ready.

Thanks for looking.

Lmk what you think.


Sent from my iPhone using Tapatalk

monjarassi
10-08-2015, 01:09 AM
Fawk yea looks sick sirre

PetefromtheStreets
10-08-2015, 10:46 AM
Here's some daytime shots.

http://images.tapatalk-cdn.com/15/10/08/82222bd1b8d7b73c9fdaaae80749d359.jpghttp://images.tapatalk-cdn.com/15/10/08/e70075e226f45aaca864e0ef7332869c.jpghttp://images.tapatalk-cdn.com/15/10/08/9820e5ae09a2aa100f26c8aed23adf92.jpghttp://images.tapatalk-cdn.com/15/10/08/ccec044f634f7a3da174865f17917c7f.jpghttp://images.tapatalk-cdn.com/15/10/08/b4e9d37b698997d858b0586bfe81da70.jpghttp://images.tapatalk-cdn.com/15/10/08/af642f0d57b65374f2f74dc3f9004b85.jpg


Sent from my iPhone using Tapatalk

PetefromtheStreets
10-13-2015, 03:24 PM
Took the trans back out of the car. Prior to tear down and purchase of the turbo components I had issues getting the car into 5/6 gears. Figured it was a synchro issue.

Turns out the hub was broken at all 3 channels where the synchro mates to the hub. It messed up both synchros pretty bad. You can see a good synchro vs the bad in the pictures below.

Onto the pics.

Enjoy....


http://images.tapatalk-cdn.com/15/10/13/c32151e5be3b68c08a802676a42d43c9.jpghttp://images.tapatalk-cdn.com/15/10/13/bbfc2cadf94d286b3cfb9928c17b44f0.jpghttp://images.tapatalk-cdn.com/15/10/13/98a1917d8d57b7e44fed21acfb14aab8.jpghttp://images.tapatalk-cdn.com/15/10/13/74896140285f056c4445ce27d6a208b3.jpghttp://images.tapatalk-cdn.com/15/10/13/1ca391ef4f44dd5fb85780b1057fdc0f.jpghttp://images.tapatalk-cdn.com/15/10/13/090364641012ba0576909f3827f8a529.jpghttp://images.tapatalk-cdn.com/15/10/13/8b8e277c703bc013d377f452534051bf.jpghttp://images.tapatalk-cdn.com/15/10/13/e3e9ae7056a1ba3424c0665994e9db46.jpghttp://images.tapatalk-cdn.com/15/10/13/1e9f3c62a00e0d8c2b10f1433df35527.jpghttp://images.tapatalk-cdn.com/15/10/13/ff2c0b043b95c8f0f41e43a1626ed6d2.jpghttp://images.tapatalk-cdn.com/15/10/13/93a6c20dee84444cbb24a7e4459b09c3.jpghttp://images.tapatalk-cdn.com/15/10/13/ce7dabfd909450b5c0ee56565b3f1a0a.jpghttp://images.tapatalk-cdn.com/15/10/13/93e86bb0a786d764ebd6558a25e81c9d.jpg

My coupler for turbo to hot side came in
http://images.tapatalk-cdn.com/15/10/13/903c0f6763bdfbe0ce34e9bf1782181d.jpg

Still need to order the proper size tbolt clamps and feed and return lines.


Sent from my iPhone using Tapatalk

dkpr87
10-14-2015, 06:42 PM
Your messy..... LOL

Glad to see you're getting closer!!!

PetefromtheStreets
10-14-2015, 08:26 PM
Your messy..... LOL

Glad to see you're getting closer!!!

They say the messiest people are the smart ones. Lol


Sent from my iPhone using Tapatalk

dkpr87
10-14-2015, 08:37 PM
They say the messiest people are the smart ones. Lol


Sent from my iPhone using Tapatalk

They say a lot of things LOL :yay:

Bottled Morphine
10-16-2015, 03:01 PM
Looks slow noob

PetefromtheStreets
10-19-2015, 02:20 PM
They say a lot of things LOL :yay:
Lol truuuuuu


Looks slow noob

Quitter


Sent from my iPhone using Tapatalk

PetefromtheStreets
10-19-2015, 02:32 PM
So anyways.... I rewrapped the manifold and dump tube and finished wrapping the downpipe with DEI titanium wrap. Love that stuff.

I had one helluva time bolting the manifold to the head...

The guy who built it ran 2 m10x1.5 bolts in it. They are supposed to be 10x1.25 bolts.

I went to pepboys and bought their manifold bolt kit since I needed to install studs. One I got the studs in I found out half the holes didn't line up to the flange 100% so I went out and bought some bits for my dremel. Got well aquatinted with them for a while and finally got it on about 1am.

Here's some pics.
http://images.tapatalk-cdn.com/15/10/19/24f64d4c03530c07801e398d29a12495.jpghttp://images.tapatalk-cdn.com/15/10/19/c8c7a6fbac84db521c712a2dc4afdc39.jpghttp://images.tapatalk-cdn.com/15/10/19/a5df486e8dddcbfde7150011e07e6de8.jpghttp://images.tapatalk-cdn.com/15/10/19/cffa7bc0869510b1cc0bf9680f2f4bbd.jpghttp://images.tapatalk-cdn.com/15/10/19/e2bded0d70c87f92e00832ef84c3f2cd.jpghttp://images.tapatalk-cdn.com/15/10/19/a6b3b1cdc0f9fdcf8de1b70858759f90.jpg

That's where I left off last night. Tonight, I hope to get the gate on and positioned right, the boost controller lines and boost controller mounted, and lines ran. The turbo bolted tight, oil feed line ran, intercooler piping on, and water pump hooked back up..... That's a long list of stuff for only a couple hour window. We shall see what gets done.

Still need to relocate battery, and finish moving fuse box.

http://images.tapatalk-cdn.com/15/10/19/934a3297bcf8d693edd3af89e243f220.jpg


Sent from my iPhone using Tapatalk

PetefromtheStreets
10-20-2015, 10:40 PM
Got the oil line and filter in.

http://images.tapatalk-cdn.com/15/10/20/d8c006b3ccded3d2584a83b3a6b36e85.jpg

Had to tighten the back lower turbo bolt with a special Allen key. One that I made myself. 5/16 was the right size but was retarded tight. And working blind wasn't helping. So I had to shave it down some to fit better. Also the exhaust flange was in the way for a traditional length Allen key or socket. So I had to cut one down.
http://images.tapatalk-cdn.com/15/10/20/a7dcd0c9123d739b6f7b013d8f40fa00.jpg

I ordered 2 sets of t bolt clamps so far and neither worked the best. I shouldn't have cheaper out but I'm not paying attention 19 dollars per clamp from kseriesparts. So I took some 3.5" clamps and cut this area down some to allow more threads to show initially to get it started.

http://images.tapatalk-cdn.com/15/10/20/b25cfe4bfa74d82716f22e638fab8845.jpg
http://images.tapatalk-cdn.com/15/10/20/244040a2069aece3a8e4af2e295b59d9.jpg
http://images.tapatalk-cdn.com/15/10/20/f10957b8aae9b52fb72630a55b4a07d7.jpg

Now they should fit well.

Got the turbo and center cartridge installed once the turbo to manifold bolts were tight.
http://images.tapatalk-cdn.com/15/10/20/c0fee5156538fe40645cd2d7b45f7945.jpg

Getting my oil pan back tomorrow hopefully.


Sent from my iPhone using Tapatalk

PetefromtheStreets
10-21-2015, 08:28 AM
So I got the gate in last night. Put a 4lb spring in it was told I can ramp that up a lot with the pmw booster and 4port solenoid by vitViper so I am anxious to see if it can hold near 4lbs. I have a feeling 6-8 is going to be the lowest it can hold.

Anyways... I also installed the turbo blanket, which btw is a lot of fun with the location of my turbo. Lol

Not a whole lot done last night, but it's progress.

http://images.tapatalk-cdn.com/15/10/21/7950c68273e5ae01f6528fbba4112c89.jpghttp://images.tapatalk-cdn.com/15/10/21/3fc1305808fcd93765c8f54455cb1f9f.jpghttp://images.tapatalk-cdn.com/15/10/21/62c03f8bf61af18af13020b263adb326.jpghttp://images.tapatalk-cdn.com/15/10/21/1fb17ef3cc9ac5cf5766d6461dd68eba.jpghttp://images.tapatalk-cdn.com/15/10/21/ac77fabacec0f9627d362b48deeeecce.jpg


Hope to get my oil pan back and get it on tonight along with the return line. Also going to put the water pump setup together and sealed up.


Sent from my iPhone using Tapatalk

dkpr87
10-21-2015, 11:31 PM
Not that i condone street racing.... buuuuuuuuuuuuuut.........

this i like :-)

http://honda-tech.com/forced-induction-16/rolling-launch-control-anti-lag-k-pro-3222267/

PetefromtheStreets
10-21-2015, 11:36 PM
Not that i condone street racing.... buuuuuuuuuuuuuut.........

this i like :-)

http://honda-tech.com/forced-induction-16/rolling-launch-control-anti-lag-k-pro-3222267/

Ehh. Idk about that. I think it's cool but you couldn't launch from a light now. Your using a hand to activate something now vs it just happening. Lol


Sent from my iPhone using Tapatalk

PetefromtheStreets
10-22-2015, 11:12 AM
So I got the vacuum lines hooked up last night. And mounted the boost controller. Can't wait to fire it up soon.

Heat wrap covering all lines and wires of course.

http://images.tapatalk-cdn.com/15/10/22/5a0c819950cdaceb913a032bb7cca28a.jpghttp://images.tapatalk-cdn.com/15/10/22/7b4656cf096f6aefe0e11f026bd5011a.jpghttp://images.tapatalk-cdn.com/15/10/22/b710b5d22f3625ee4aa8d1aaa99b1389.jpghttp://images.tapatalk-cdn.com/15/10/22/f954268faf7466cfcd3f27934725212a.jpghttp://images.tapatalk-cdn.com/15/10/22/1581499c50987f2c5916153018789dbe.jpghttp://images.tapatalk-cdn.com/15/10/22/0fc516b2cac890f181fbcf0a14498bf0.jpg

That's all for last night. Trying to figure out how to route this long ass fucking throttle cable. Stupid ass Acura.

The guys taking for fucking ever on my oil pan so I can't throw the subframe back up there and situate the exhaust Ect.

Sent from my iPhone using Tapatalk

BoostedK20
10-30-2015, 12:03 AM
So I got the vacuum lines hooked up last night. And mounted the boost controller. Can't wait to fire it up soon.

Heat wrap covering all lines and wires of course.

http://images.tapatalk-cdn.com/15/10/22/5a0c819950cdaceb913a032bb7cca28a.jpghttp://images.tapatalk-cdn.com/15/10/22/7b4656cf096f6aefe0e11f026bd5011a.jpghttp://images.tapatalk-cdn.com/15/10/22/b710b5d22f3625ee4aa8d1aaa99b1389.jpghttp://images.tapatalk-cdn.com/15/10/22/f954268faf7466cfcd3f27934725212a.jpghttp://images.tapatalk-cdn.com/15/10/22/1581499c50987f2c5916153018789dbe.jpghttp://images.tapatalk-cdn.com/15/10/22/0fc516b2cac890f181fbcf0a14498bf0.jpg

That's all for last night. Trying to figure out how to route this long ass fucking throttle cable. Stupid ass Acura.

The guys taking for fucking ever on my oil pan so I can't throw the subframe back up there and situate the exhaust Ect.

Sent from my iPhone using Tapatalk

Good update. I don't think I've ever heard or read you swear so much! :rotfl: What is being done with your oil pan? Track regulation goodness?

PetefromtheStreets
10-30-2015, 03:05 PM
Good update. I don't think I've ever heard or read you swear so much! :rotfl: What is being done with your oil pan? Track regulation goodness?

Haha I swore more in person in the garage messing with the car.

And he's welding the return line fitting on. I got it back and installed. I need to redo the hot side intercooler pipe as it has a shitty angle for a coupler off the turbo. So that's getting fixed after World Cup Finals. That's when the shop will have time.


Sent from my iPhone using Tapatalk

BoostedK20
11-16-2015, 03:15 PM
Haha I swore more in person in the garage messing with the car.

And he's welding the return line fitting on. I got it back and installed. I need to redo the hot side intercooler pipe as it has a shitty angle for a coupler off the turbo. So that's getting fixed after World Cup Finals. That's when the shop will have time.


Sent from my iPhone using Tapatalk
WCF has passed, where are the updates?! Hope all is well!

dkpr87
11-16-2015, 03:56 PM
WCF has passed, where are the updates?! Hope all is well!
Same here man! Updates! Updates! Updates!

Sent from my SAMSUNG-SM-N920A using Tapatalk

BoostedK20
11-16-2015, 04:02 PM
Hopefully your test went well!!

Spoolin_VTEC
11-16-2015, 09:56 PM
Petey Streets! Long time man. Test? What kinda test, a compression test? I hope that went well too!

Si Speed 317
11-16-2015, 10:33 PM
If they ask where the Declaration of Independence was signed, just say at the bottom. Good luck brother!

PetefromtheStreets
11-16-2015, 11:05 PM
If they ask where the Declaration of Independence was signed, just say at the bottom. Good luck brother!

Lmfaooo. I will make sure that is the answer. Lol


Petey Streets! Long time man. Test? What kinda test, a compression test? I hope that went well too!

Wassup man. Long time indeed. Everything good for you?

Test is an Aptitude test for getting into a local union. I test on Thursday so wish me luck.


Hopefully your test went well!!
Test is on Thursday wish me luck! And thank you


Same here man! Updates! Updates! Updates!
[QUOTE=BoostedK20;31633]WCF has passed, where are the updates?! Hope all is well!

I have put the car on a complete stop while I spent the last couple weeks studying for this test. After the test I will continue with the car and get it knocked out.

Unfortunately I just can't spend the time on the car right now.


Sent from my iPhone using Tapatalk

PetefromtheStreets
11-20-2015, 05:08 PM
Now that my testing is over with I've got time to get back to the car. Here's a pic of gold on the rad. That's all the wrap I'll be applying now. May remove the bit on the manifold. I'm undecided. http://images.tapatalk-cdn.com/15/11/20/ad93d8f4862d6fdc4f68271511b4e289.jpg

Waiting on the shop to get back to me about getting the car up there for modification of the intercooler piping, and make the battery relocation tray and then she should be good to tune and roll out.


Sent from my iPhone using Tapatalk

dkpr87
11-20-2015, 06:14 PM
Now that my testing is over with I've got time to get back to the car. Here's a pic of gold on the rad. That's all the wrap I'll be applying now. May remove the bit on the manifold. I'm undecided. http://images.tapatalk-cdn.com/15/11/20/ad93d8f4862d6fdc4f68271511b4e289.jpg

Waiting on the shop to get back to me about getting the car up there for modification of the intercooler piping, and make the battery relocation tray and then she should be good to tune and roll out.

Sent from my iPhone using Tapatalk

:ohsnap:

Spoolin_VTEC
11-23-2015, 10:20 PM
:rotfl: @ the one spot of gold wrap on the manifold hahahaha. I feel like I know your thought process with that. "This won't do anything realistically, but it's more gold to put down, and that's doing something. ::lays gold wrap::

::takes pic::

:iorun:

PetefromtheStreets
11-23-2015, 10:21 PM
:rotfl: @ the one spot of gold wrap on the manifold hahahaha. I feel like I know your thought process with that. "This won't do anything realistically, but it's more gold to put down, and that's doing something. ::lays gold wrap::

::takes pic::

:iorun:

Lmao. Exactly. But I've since pulled it off


Sent from my iPhone using Tapatalk

PetefromtheStreets
11-25-2015, 02:21 AM
So she's finally back on all 4's tonight.

Next week I'll have it in the shop for a few things to get her done then cruisin time. http://images.tapatalk-cdn.com/15/11/24/8939e07f50a6d3ac3369d6f16e5e679b.jpg


Sent from my iPhone using Tapatalk

PetefromtheStreets
12-04-2015, 12:22 AM
So a couple days ago now I started her up for the first time turbo'd. What an amazing time. I am in love with the sidewinder sound and to my surprise the car is sooooooo quiet. Even on a cold start she's much quieter than my car was at operating temperature with the blower.

Can't wait to finish the fmic piping and mount the battery. Then I finally get to take her on the road.

Anyways. Here's some video of it. More to follow soon.

https://www.dropbox.com/s/979wwlggxvp9q9q/Video%20Dec%2003%2C%2011%2017%2019%20PM.mov?dl=0


Sent from my iPhone using Tapatalk

Si Speed 317
12-05-2015, 10:50 AM
So a couple days ago now I started her up for the first time turbo'd. What an amazing time. I am in love with the sidewinder sound and to my surprise the car is sooooooo quiet. Even on a cold start she's much quieter than my car was at operating temperature with the blower.

Can't wait to finish the fmic piping and mount the battery. Then I finally get to take her on the road.

Anyways. Here's some video of it. More to follow soon.

https://www.dropbox.com/s/979wwlggxvp9q9q/Video%20Dec%2003%2C%2011%2017%2019%20PM.mov?dl=0


Sent from my iPhone using Tapatalk

:woot::woot::woot::woot::iorun: Congratulations! Hell of a feeling man, I'm sure you're super eager now. Keep us updated!!

PetefromtheStreets
12-05-2015, 10:53 AM
:woot::woot::woot::woot::iorun: Congratulations! Hell of a feeling man, I'm sure you're super eager now. Keep us updated!!

Veeeeeeerrrrrrrrrryyyyy eager! Just waiting on the shop to open its doors for me. So soooooon


Sent from my iPhone using Tapatalk

Si Speed 317
12-05-2015, 10:54 AM
Veeeeeeerrrrrrrrrryyyyy eager! Just waiting on the shop to open its doors for me. So soooooon


Sent from my iPhone using Tapatalk

Having it dyno tuned?

PetefromtheStreets
12-05-2015, 11:12 AM
Having it dyno tuned?

Yessir. I'm going to tune it on pump gas


Sent from my iPhone using Tapatalk

PetefromtheStreets
12-05-2015, 11:16 AM
Then have Mo tune it on race gas


Sent from my iPhone using Tapatalk

PetefromtheStreets
12-07-2015, 03:30 PM
Cars going to the shop this week for sure. Hopefully Wednesday is what I was told. So that will be great


But anyways here's a couple revs I'm digging the sound of the exhaust now with the turbo installed.

Much much quieter than when supercharged

https://www.dropbox.com/s/0l80qfcodjz6j1f/Video%20Dec%2007%2C%209%2044%2015%20AM.mov?dl=0

Sent from my iPhone using Tapatalk

BoostedK20
12-07-2015, 03:46 PM
Cars going to the shop this week for sure. Hopefully Wednesday is what I was told. So that will be great


But anyways here's a couple revs I'm digging the sound of the exhaust now with the turbo installed.

Much much quieter than when supercharged

https://www.dropbox.com/s/0l80qfcodjz6j1f/Video%20Dec%2007%2C%209%2044%2015%20AM.mov?dl=0

Sent from my iPhone using Tapatalk

Sounds good!!! Hope you can get some dyno videos. What #s/boost level are you shooting for?

PetefromtheStreets
12-07-2015, 04:00 PM
Sounds good!!! Hope you can get some dyno videos. What #s/boost level are you shooting for?

Thanks man. Looking for the following:

Pump gas
500whp on about 18-20psi

And

Race gas
750+ on 28-34psi

Whatever the turbo Max's at


Sent from my iPhone using Tapatalk

BoostedK20
12-07-2015, 04:14 PM
Thanks man. Looking for the following:

Pump gas
500whp on about 18-20psi

And

Race gas
750+ on 28-34psi

Whatever the turbo Max's at


Sent from my iPhone using Tapatalk

That race gas goal made me smile! Which race fuel will you be using?

PetefromtheStreets
12-07-2015, 04:18 PM
That race gas goal made me smile! Which race fuel will you be using?

Lolol. Pump gas I want to be fairly conservative. And race gas is kill mode lol

C16
Sent from my iPhone using Tapatalk

Spaz
12-08-2015, 01:23 PM
That would be awesome... 750.... drool

I was aiming for 600whp but now I'm thinking about just rebuilding it stock to fix oil leak and put her back in call it a day

PetefromtheStreets
12-09-2015, 10:05 PM
That would be awesome... 750.... drool

I was aiming for 600whp but now I'm thinking about just rebuilding it stock to fix oil leak and put her back in call it a day

What fun would that be lolol



Sent from my iPhone using Tapatalk

BoostedK20
12-09-2015, 11:03 PM
That would be awesome... 750.... drool

I was aiming for 600whp but now I'm thinking about just rebuilding it stock to fix oil leak and put her back in call it a day

Treblic has tuned cars that made over 700whp stock block that lasted for 2+ years daily driven IIRC. Might have been 3+ years. May have been an unopened motor. Do you have APR/aftermarket head hardware?

BoostedK20
12-09-2015, 11:03 PM
What fun would that be lolol



Sent from my iPhone using Tapatalk

After ALL the taking apart and putting back together, NOW he decides to go OEM. :rotfl::iorun::hiding:

PetefromtheStreets
12-09-2015, 11:14 PM
She made it to the shop. Whole hot side pipe needs to be remade smh.

Had sooooooooooooooo much fun loading it on the trailer. Lol. My brother in law put the wrong size ball hitch on the truck. So when my son was was operating the winch that was using my Rsx battery for power, the weight of the car lifted the trailer off of his truck hitch flinging my battery across the street. Smh. Lol. On top of that my fender liner was ripped out during the process lmao. So basically it cost me a new battery and fender liner to tow y cat to the shop. Lol

But anyways here she sits. Should have the battery tray and intercooler piping finished up tomorrow or Friday.

http://images.tapatalk-cdn.com/15/12/09/6423b0421375c9f8b151ee98d3976907.jpghttp://images.tapatalk-cdn.com/15/12/09/e251c12de9b445b60d61e1270a42db8a.jpghttp://images.tapatalk-cdn.com/15/12/09/ffa37f29e1b68f442cfa850e22c748f8.jpg


Sent from my iPhone using Tapatalk

boosted_teg
12-10-2015, 03:21 AM
why do you have to redo the piping?

Spoolin_VTEC
12-10-2015, 10:26 AM
She made it to the shop. Whole hot side pipe needs to be remade smh.

Had sooooooooooooooo much fun loading it on the trailer. Lol. My brother in law put the wrong size ball hitch on the truck. So when my son was was operating the winch that was using my Rsx battery for power, the weight of the car lifted the trailer off of his truck hitch flinging my battery across the street. Smh. Lol. On top of that my fender liner was ripped out during the process lmao. So basically it cost me a new battery and fender liner to tow y cat to the shop. Lol

But anyways here she sits. Should have the battery tray and intercooler piping finished up tomorrow or Friday.

http://images.tapatalk-cdn.com/15/12/09/6423b0421375c9f8b151ee98d3976907.jpghttp://images.tapatalk-cdn.com/15/12/09/e251c12de9b445b60d61e1270a42db8a.jpghttp://images.tapatalk-cdn.com/15/12/09/ffa37f29e1b68f442cfa850e22c748f8.jpg


Sent from my iPhone using Tapatalk

She looks so damn sexy and aggressive!!!!!!!!!!!!! CW for results. And yea, why'd you have to redo the piping?

PetefromtheStreets
12-10-2015, 12:29 PM
She looks so damn sexy and aggressive!!!!!!!!!!!!! CW for results. And yea, why'd you have to redo the piping?

Thanks man. I really appreciate it. And because the guy who made the original pipe was trying to do as little work as possible and rushed to get it done. So it had incorrect angles and the piping needed to have an angled coupler off the turbo to IC and I do not want any angled couplers in my system I only want to use straight couplers.


Sent from my iPhone using Tapatalk

PetefromtheStreets
12-10-2015, 03:42 PM
why do you have to redo the piping?

The retard who made it originally gave me some dumbass angles to work with and threw a coupler on it to cover it up.


Sent from my iPhone using Tapatalk

Si Speed 317
12-10-2015, 08:19 PM
Thanks man. I really appreciate it. And because the guy who made the original pipe was trying to do as little work as possible and rushed to get it done. So it had incorrect angles and the piping needed to have an angled coupler off the turbo to IC and I do not want any angled couplers in my system I only want to use straight couplers.


Sent from my iPhone using Tapatalk

PIECE OF SHIT.

/rant.

:rotfl: But seriously that's BS. It'll be well worth it!

PetefromtheStreets
12-11-2015, 09:38 AM
PIECE OF SHIT.

/rant.

:rotfl: But seriously that's BS. It'll be well worth it!

Yea man. It made me mad. But fuck it. Moving on with it lol. I'm not even going to tell him he fucked up. I'm just going to let him be.


Sent from my iPhone using Tapatalk

PetefromtheStreets
12-12-2015, 06:07 PM
Here she is sitting patiently.
http://images.tapatalk-cdn.com/15/12/12/f5a9dbb1cd2f74ba219ac13d4de2996b.jpghttp://images.tapatalk-cdn.com/15/12/12/46485643df50d09347f86d7fb0e54d71.jpg

Intercooler pipe all finished up
http://images.tapatalk-cdn.com/15/12/12/179b6935faa36f4dc286901293a509b3.jpg

Started on the battery trayhttp://images.tapatalk-cdn.com/15/12/12/44bbb7e9d69a05f7186250c9710aec6a.jpg

Battery tray finishedhttp://images.tapatalk-cdn.com/15/12/12/56ed842f3c286ce06604a533fa35006a.jpg

And battery installed. Still need to make the tie down
http://images.tapatalk-cdn.com/15/12/12/d005116cb7b0366eefb4b4a63fea5d2c.jpg

Packed up headed home
http://images.tapatalk-cdn.com/15/12/12/528ce101915adb37fca7188cda7915f2.jpg
http://images.tapatalk-cdn.com/15/12/12/abf526ea659fa160fcb9c30991bcc11c.jpg

Stay tuned guys Dyno time will be soon


Sent from my iPhone using Tapatalk

PetefromtheStreets
12-14-2015, 09:36 AM
Took her for her maiden voyage last night. She is officially cruising.

I think it's hilarious the car has a wastegate spring of 4psi in it and it's only making 4psi all the way to redline. It's mind boggling lol. I've heard of people having major issue with creep and I'm seeing non so far. Awesome stuff as if like to keep 4psi in 1st gear anyways.

Here's a couple pics and a video of 4psi vs 255's. Lol

http://images.tapatalk-cdn.com/15/12/14/f582bba40180ea44a516adc2cee139d8.jpg
http://images.tapatalk-cdn.com/15/12/14/a53cb6b1c3b5cea7eb36170a44bba113.jpg
https://www.dropbox.com/s/0gzdldwoqt7k2b1/Video%20Dec%2013%2C%208%2017%2043%20PM%20%281%29.m ov?dl=0


Sent from my iPhone using Tapatalk

Si Speed 317
12-14-2015, 10:37 AM
So tough! Love the 4psi till redline. I need to adjust my turbo hot side with some manual labor to reduce my boost creep.. real PITA but I've been living with it. Can't wait till you crank up the boost!

PetefromtheStreets
12-14-2015, 10:51 AM
So tough! Love the 4psi till redline. I need to adjust my turbo hot side with some manual labor to reduce my boost creep.. real PITA but I've been living with it. Can't wait till you crank up the boost!

I'm loving this turbo shenanigans. :turbohug: thanks man. Can't wait to say hello to some power


Sent from my iPhone using Tapatalk

PetefromtheStreets
12-14-2015, 10:52 AM
I also think it's because of my gate size I have no creep


Sent from my iPhone using Tapatalk

boosted_teg
12-17-2015, 01:46 AM
60mm wastegate or 2 44mm usually has no creep. People who are plagued with creep have 1 44mm gate and not done right. I think the BDL manifold is the only one i could see keep 1 small gate and have no creep.

need to see some 30-40psi pulls ;)

PetefromtheStreets
12-17-2015, 08:52 AM
60mm wastegate or 2 44mm usually has no creep. People who are plagued with creep have 1 44mm gate and not done right. I think the BDL manifold is the only one i could see keep 1 small gate and have no creep.

need to see some 30-40psi pulls ;)

So I did a good thing choosing a 66mm gate. Lol. And mmmmmm :drool: 40psi would be insane!


Sent from my iPhone using Tapatalk

Spoolin_VTEC
12-20-2015, 11:56 PM
60mm wastegate or 2 44mm usually has no creep. People who are plagued with creep have 1 44mm gate and not done right. I think the BDL manifold is the only one i could see keep 1 small gate and have no creep.

need to see some 30-40psi pulls ;)
BDL is the shit. Just sayin

So I did a good thing choosing a 66mm gate. Lol. And mmmmmm :drool: 40psi would be insane!


Sent from my iPhone using Tapatalk

66mm gate?! What company? Awesome!

PetefromtheStreets
12-21-2015, 12:43 AM
66mm gate?! What company? Awesome!

It's a PTE66 precision I originally wanted a tial but got a deal on the precision from a local friend.


Sent from my iPhone using Tapatalk

PetefromtheStreets
12-21-2015, 11:00 AM
Doing racecar things
https://www.dropbox.com/s/fxbkloy2tvpmv3x/Video%20Dec%2012%2C%203%2056%2014%20PM.mov?dl=0

I love the sidewinder sound. Oh how I've longed for that sound!

Tuning soon hopefully. Waiting on the dyno time.

Here a quick pull on 4psi

Holy torque steer.

Shortly video quality and still can't see the road very well. I haven't quite figured out lens placement. I use my sun visor to hold my phone for the videos.

https://www.dropbox.com/s/gqz076o8oj8xe54/Video%20Dec%2019%2C%202%2043%2001%20AM.mov?dl=0


Sent from my iPhone using Tapatalk

BoostedK20
12-22-2015, 11:41 PM
Doing racecar things
https://www.dropbox.com/s/fxbkloy2tvpmv3x/Video%20Dec%2012%2C%203%2056%2014%20PM.mov?dl=0

I love the sidewinder sound. Oh how I've longed for that sound!

Tuning soon hopefully. Waiting on the dyno time.

Here a quick pull on 4psi

Holy torque steer.

Shortly video quality and still can't see the road very well. I haven't quite figured out lens placement. I use my sun visor to hold my phone for the videos.

https://www.dropbox.com/s/gqz076o8oj8xe54/Video%20Dec%2019%2C%202%2043%2001%20AM.mov?dl=0


Sent from my iPhone using Tapatalk

Holy torque steer or turtle in the middle of the road?
Sounds good! Eager to hear high boost!!

PetefromtheStreets
12-23-2015, 01:07 AM
Holy torque steer or turtle in the middle of the road?
Sounds good! Eager to hear high boost!!

Man she just yanks. No freakin clue how come it's so bad but it was never like this until I put the 17x9's on.

Thanks man. I'm eager for that as well. After Christmas I'll wire up the boost controller and set a tuning date.


Sent from my iPhone using Tapatalk

BoostedK20
12-23-2015, 11:28 AM
Man she just yanks. No freakin clue how come it's so bad but it was never like this until I put the 17x9's on.

Thanks man. I'm eager for that as well. After Christmas I'll wire up the boost controller and set a tuning date.


Sent from my iPhone using Tapatalk

Could it be your LCA bushings?

PetefromtheStreets
12-23-2015, 11:29 AM
Could it be your LCA bushings?

Idk but that very well could be. I'm actually going to buy the blox spherical LCA bushings because I feel some wheel hop and I'm tired of that crap


Sent from my iPhone using Tapatalk

BoostedK20
12-23-2015, 11:31 AM
Idk but that very well could be. I'm actually going to buy the blox spherical LCA bushings because I feel some wheel hop and I'm tired of that crap


Sent from my iPhone using Tapatalk

Should help tremendously. I haven't heard of the blox setup, only full-race and energy, with the latter being the more affordable of the two.

PetefromtheStreets
12-23-2015, 11:34 AM
Should help tremendously. I haven't heard of the blox setup, only full-race and energy, with the latter being the more affordable of the two.

I haven't seen full race for the Rsx. I know of energy and PCI. But PCI gives more castor which idk if I really need it. But I currently have energy suspension LCA bushings and they suck. They were ok for a while but not intended for the amount of abuse I put on them I suppose.


Sent from my iPhone using Tapatalk

BoostedK20
12-23-2015, 07:10 PM
I haven't seen full race for the Rsx. I know of energy and PCI. But PCI gives more castor which idk if I really need it. But I currently have energy suspension LCA bushings and they suck. They were ok for a while but not intended for the amount of abuse I put on them I suppose.


Sent from my iPhone using Tapatalk

Good to know!

PetefromtheStreets
12-29-2015, 12:34 PM
So I've had the car out a few times but we've had some really shitty weather. So not too much more to add on while I wait for dyno time. The car is going to be a lot of fun though. I can tell. Did a pull 2 days ago and it made 22psi. But a/f jumped to the 12's so it's not tuned for that much boost yet.

Made 22psi at 6800rpm. Still have another 2000+rpm to go. Virtual dyno says is made 531/422
http://images.tapatalk-cdn.com/15/12/29/04637b28563160ccc850e3d70cfabadc.jpg

It made 2psi till about 4600 I think maybe 5600. Then shot up. So it definitely needs tuning to get the boost controller working as it should.

Here's a little fly by. Made 12psi peak when it spun as I let off the throttle.

https://www.dropbox.com/s/2kmdtj3z2ray9q3/Video%20Dec%2027%2C%2011%2040%2002%20PM.mov?dl=0

But we're going to find out for sure what power it's at soon enough.


Sent from my iPhone using Tapatalk

boosted_teg
12-30-2015, 01:24 AM
Definetly needs tuning and should look a lot better. I never liked those virtual dyno for actual numbers. I could just change a few settings and gain a lot of power. Good for a power curve though.

Is your skunk2 manifold the 4.5 litre? or 3.5litre? Im almost debating selling my afi center feed to try one out. BWR k civic from speedfactory uses the new ultra manifolds and they make over 1000whp

PetefromtheStreets
02-08-2016, 06:38 PM
Definetly needs tuning and should look a lot better. I never liked those virtual dyno for actual numbers. I could just change a few settings and gain a lot of power. Good for a power curve though.

Is your skunk2 manifold the 4.5 litre? or 3.5litre? Im almost debating selling my afi center feed to try one out. BWR k civic from speedfactory uses the new ultra manifolds and they make over 1000whp

What's up man. Yea I totally agree you can't rely on virtual dyno for legit numbers. Just fooling around with it.

My Ultra is 4.5L. I really like it and tons of cars use them. They deff port and polish them tho. The castings are pretty rough and unsightly.


Sent from my iPhone using Tapatalk

PetefromtheStreets
02-08-2016, 06:38 PM
What's up guys. Been slow over here as I wait for my tune. Got a few things to install before dyno time though.

Spherical LCA BUSHINGS.
http://uploads.tapatalk-cdn.com/20160208/75e2b210adcc157d83fd0ce68a6928ad.jpg

New PLX GEN4 wideband controller.
http://uploads.tapatalk-cdn.com/20160208/f522ca8148108f31ad70729e86bdbad9.jpg

AEM boost gauge
http://uploads.tapatalk-cdn.com/20160208/44446f770fa1a3d58227a9e030f96a4b.jpg

And last but not least I am in the process of removing my Kelford C cams and installing k24a2 cams with 50* VTC because I've been informed by many that kelfords just suck for turbo cars and pretty much all around relative to the rest of the cams on the market.

http://uploads.tapatalk-cdn.com/20160208/9c0f3e6c903b39664532b32405e3b7e6.jpg


Sent from my iPhone using Tapatalk

BoostedK20
02-10-2016, 03:00 PM
Nice spherical bushings! Did you change your valves, springs, or retainers with the cam swap?

How much did those bushings run you?

PetefromtheStreets
02-10-2016, 03:22 PM
Nice spherical bushings! Did you change your valves, springs, or retainers with the cam swap?

How much did those bushings run you?

Thanks man. The head was already built before. So just replaced the cams and installed 50* VTC ON THE TSX cams I installed last night.

The bushings were $155


Sent from my iPhone using Tapatalk

PetefromtheStreets
02-10-2016, 03:25 PM
Finished the cam swap last night. Still need to valve lash and install VC.

http://uploads.tapatalk-cdn.com/20160210/4e7186c11f07b4bbf6ee7ba7ee8d2e15.jpg
Also installed my new turbo blanket.
http://uploads.tapatalk-cdn.com/20160210/5f198bba98583e3982f101d578153454.jpg
http://uploads.tapatalk-cdn.com/20160210/a35825e20b9026377082f3666eac5691.jpg


Sent from my iPhone using Tapatalk

PetefromtheStreets
02-15-2016, 10:41 PM
Got the poly bushings out of my old LCA's and pushed in the new blox sphericals. Can't wait to see how it responds with these in. Waiting on my PLX wideband still. Should be in tomorrow. Also ordered my brakes to be able to fit my new slicks. Wheels will be shipped this week to me. Very exciting things happening. Just need to be able to get it all done before things kick off here for racing season.

Bearing installed and back in the car.
http://uploads.tapatalk-cdn.com/20160216/558d8a53124e4699df31d5188ab71484.jpg

New brake rotors and EBC yellow stuff pads
http://uploads.tapatalk-cdn.com/20160216/8c9e5f3acd840284160d90e25b9807e2.jpg

Also ordered some new powder coated calipers and sliders. I am replacing them because I had shaved down my stock ones pretty far to fit my last set of slicks and I never really felt too confident in them. Glad to have finally gotten them off the car.

Stainless braided brake lines as well.
http://uploads.tapatalk-cdn.com/20160216/f9e94fc579332bfd2d6d7eb1cfc470cf.jpg

A friend of mine hit the wall at 150mph because an oem brake line burst. He said he'd never race a car again without those lines being replaced. Figured I'd step it up as well.

Also for future use I bought a ball joint separator. So tired of ruining boots and having trouble getting it out for the LCA's
No I did not order this one as its $288 dollars and I'm not about that life. Lol

I ordred the harbor freight special
http://uploads.tapatalk-cdn.com/20160216/5599d5b88c06c742f1443cfa94de5b1a.jpg
http://uploads.tapatalk-cdn.com/20160216/ff89442ce1ce86cc031f800eeef3d1b4.jpg


Sent from my iPhone using Tapatalk

PetefromtheStreets
02-15-2016, 10:43 PM
I love the shit out of my new turbo blanket. I get excited about that dumb trivial stuff. http://uploads.tapatalk-cdn.com/20160216/b018ac9a92eea0dbfef5dd15f7d5f68e.jpg

http://uploads.tapatalk-cdn.com/20160216/f26029c66d224d218da524813fb68ddf.jpg



Sent from my iPhone using Tapatalk

BoostedK20
02-16-2016, 12:04 PM
Great updates and pictures!! Glad things are coming together. Looking forward to your LCA bushing review!

PetefromtheStreets
02-16-2016, 12:06 PM
Great updates and pictures!! Glad things are coming together. Looking forward to your LCA bushing review!

Yea man. Gonna take some videos at the dyno and see what she looks like. I'll deff make a review for them on here.


Sent from my iPhone using Tapatalk

PetefromtheStreets
02-16-2016, 12:06 PM
PLX wideband finally arrived today. Installing tonight. http://uploads.tapatalk-cdn.com/20160216/99d6d729f0a53371e5a2b9d9be79d7e0.jpg


Sent from my iPhone using Tapatalk

BoostedK20
02-23-2016, 12:08 PM
Any display issues with the gauge? And how is it with the auxiliary cable connectors? Heard that's a real PITA for PLX wideband owners. In for pics via dameliophotography!

PetefromtheStreets
02-23-2016, 12:16 PM
Any display issues with the gauge? And how is it with the auxiliary cable connectors? Heard that's a real PITA for PLX wideband owners. In for pics via dameliophotography!

I really like the PLX. Install was a breeze. Having tha additional little box is actually not a bad thing at all. It's very small when you have it in your hand.

Now my issue is with my kpro. It will not allow me to connect to my laptop and am in contact with hondata about my issues as I've tried everything currently available on the web besides trying it in another car.

I'll have to get Damelio into gear with the pics. She's slacking. Lol


Sent from my iPhone using Tapatalk

PetefromtheStreets
06-01-2016, 11:23 PM
Ok so it's been a while since I've been posting. I've had various reasons as to why that is. Mainly because I didn't want everyone knowing 100% of what my car had done on the dyno. But I just don't care anymore at this point.

So anyways I found out what my Ecu issue was. My kpro board had fried. So I sent my Ecu is for diag/repair. $350 later I received a working kpro.

Car started up perfect. THANK GOD!

Got the car loaded up on the trailer and off we went to the shop.
http://uploads.tapatalk-cdn.com/20160602/59f7d747f7e6b56144f64ce8e91cccb4.jpg
http://uploads.tapatalk-cdn.com/20160602/a0335ce8d0bb0e6acefab4022cdfb081.jpg

#treblictuned shop is the shit. Nothing in there that isn't racecar. Except mine when He pulled it on the dyno.
http://uploads.tapatalk-cdn.com/20160602/31826e5fd8d96eff5d680a7d7238c6fc.jpg
http://uploads.tapatalk-cdn.com/20160602/ff8ff46e40ff1e390f90ffec1304d678.jpg


Strapped her down and he built me up a Kal. Asked me questions about the build, trans, wastegate, Ect.
He did his first pull to see what the gate would hold. It held a solid 6psi to redline
https://vimeo.com/169038238

Car made like 240hp. That was pretty sweet. But even with the pwm booster the spring would only go to 9psi at 80% duty cycle. So we took the gate off and changed out the spring to a 12psi Spring. Going from 6psi spring to 12lb Spring the car picked up 100hp. Lol

https://vimeo.com/169038535

Tuning in 93 pump gas from 7-11. The car layed down 554hp @ 17psi with the filter on the turbo. I asked him if the filter was too small and he said "let's do a pull with it off".

https://vimeo.com/169038674

Car made 562hp with it off. So all in all the filter is doing pretty well. Flowing enough Ect.
http://uploads.tapatalk-cdn.com/20160602/a28deeafe5e0c95b15df144f8a3bf5ef.jpg

Out goes the pump gas and in goes the race gas. 2- 5 gallons of Q16.
http://uploads.tapatalk-cdn.com/20160602/d219e967b361b786e47ce7ed05e5e0f7.jpg

First pull on the gas with modified ignition car made 640hp tires barely holding the power to redline. Next pull he added to trackbite to the rollers to try and help and it blew the tires off and made 646hp.
https://vimeo.com/169039014

Tuner said he was Leary about tuning in 4th gear as the car would pick up a shit ton of torque. He was worried about the trans. (He forgot I had a PPG do my box in there. Lol) so I said fuck that put it in 4th.

First pull In 4th gear 30psi a coupler blew off the tb and the car made an astounding 780whp.

https://vimeo.com/169039140

I couldn't believe the car had just done that. My goal walking in there was 700. And 740 MAX! But it made that. I kept asking if that was real!

We fixed the coupler and used a bit of hairspray to keep it on this time. Next run on the dyno.

https://vimeo.com/169039379

Made 793whp 603ft/lb trq @30.1psi.

My little Borg s366 was putting in some work.

We turned it back down to 27psi and it made 733whp. So that is where it sits currently.
http://uploads.tapatalk-cdn.com/20160602/d661db5724408e6fde04b3ea550ad337.jpg
https://vimeo.com/169039437

All in all I am extremely happy with the car and tune and it's amazing how much power these K's can make. Only trouble being the chassis it's in. They are so heavy and restrictive.

I drove the car to the track the next weekend and got tires switched over.

Car looks mean AF!

http://uploads.tapatalk-cdn.com/20160602/0cc3b9849e1081c456c4fd1b2e77f7d4.jpg

First pass of the day

11.5 @ 139mph

Car drifted towards the wall and yes I got scared of it. Lol

2nd pass.
11.33 @ 122mph
Car drifted again and started cutting out. Let off at some point.

3rd pass
11.1 @ 143mph
Car ran solid but I knew it had more. I was getting more and more comfortable with it.

I decided I wasn't leaving till I went 10's.

So back to the lanes I went.

4th pass
10.74 @ 145
Car ran great. Small hiccup with the throttle.

https://vimeo.com/169040005

Found out the tps wires were held on by a couple strands on one or two wires.

Fixed that and am about to head back to get some more personal bests.

Wish me luck.


Sent from my iPhone using Tapatalk

Shanket
06-02-2016, 03:57 AM
Amazing !

BoostedK20
06-07-2016, 08:35 AM
Ok so it's been a while since I've been posting. I've had various reasons as to why that is. Mainly because I didn't want everyone knowing 100% of what my car had done on the dyno. But I just don't care anymore at this point.

So anyways I found out what my Ecu issue was. My kpro board had fried. So I sent my Ecu is for diag/repair. $350 later I received a working kpro.

Car started up perfect. THANK GOD!

Got the car loaded up on the trailer and off we went to the shop.
http://uploads.tapatalk-cdn.com/20160602/59f7d747f7e6b56144f64ce8e91cccb4.jpg
http://uploads.tapatalk-cdn.com/20160602/a0335ce8d0bb0e6acefab4022cdfb081.jpg

#treblictuned shop is the shit. Nothing in there that isn't racecar. Except mine when He pulled it on the dyno.
http://uploads.tapatalk-cdn.com/20160602/31826e5fd8d96eff5d680a7d7238c6fc.jpg
http://uploads.tapatalk-cdn.com/20160602/ff8ff46e40ff1e390f90ffec1304d678.jpg


Strapped her down and he built me up a Kal. Asked me questions about the build, trans, wastegate, Ect.
He did his first pull to see what the gate would hold. It held a solid 6psi to redline
https://vimeo.com/169038238

Car made like 240hp. That was pretty sweet. But even with the pwm booster the spring would only go to 9psi at 80% duty cycle. So we took the gate off and changed out the spring to a 12psi Spring. Going from 6psi spring to 12lb Spring the car picked up 100hp. Lol

https://vimeo.com/169038535

Tuning in 93 pump gas from 7-11. The car layed down 554hp @ 17psi with the filter on the turbo. I asked him if the filter was too small and he said "let's do a pull with it off".

https://vimeo.com/169038674

Car made 562hp with it off. So all in all the filter is doing pretty well. Flowing enough Ect.
http://uploads.tapatalk-cdn.com/20160602/a28deeafe5e0c95b15df144f8a3bf5ef.jpg

Out goes the pump gas and in goes the race gas. 2- 5 gallons of Q16.
http://uploads.tapatalk-cdn.com/20160602/d219e967b361b786e47ce7ed05e5e0f7.jpg

First pull on the gas with modified ignition car made 640hp tires barely holding the power to redline. Next pull he added to trackbite to the rollers to try and help and it blew the tires off and made 646hp.
https://vimeo.com/169039014

Tuner said he was Leary about tuning in 4th gear as the car would pick up a shit ton of torque. He was worried about the trans. (He forgot I had a PPG do my box in there. Lol) so I said fuck that put it in 4th.

First pull In 4th gear 30psi a coupler blew off the tb and the car made an astounding 780whp.

https://vimeo.com/169039140

I couldn't believe the car had just done that. My goal walking in there was 700. And 740 MAX! But it made that. I kept asking if that was real!

We fixed the coupler and used a bit of hairspray to keep it on this time. Next run on the dyno.

https://vimeo.com/169039379

Made 793whp 603ft/lb trq @30.1psi.

My little Borg s366 was putting in some work.

We turned it back down to 27psi and it made 733whp. So that is where it sits currently.
http://uploads.tapatalk-cdn.com/20160602/d661db5724408e6fde04b3ea550ad337.jpg
https://vimeo.com/169039437

All in all I am extremely happy with the car and tune and it's amazing how much power these K's can make. Only trouble being the chassis it's in. They are so heavy and restrictive.

I drove the car to the track the next weekend and got tires switched over.

Car looks mean AF!

http://uploads.tapatalk-cdn.com/20160602/0cc3b9849e1081c456c4fd1b2e77f7d4.jpg

First pass of the day

11.5 @ 139mph

Car drifted towards the wall and yes I got scared of it. Lol

2nd pass.
11.33 @ 122mph
Car drifted again and started cutting out. Let off at some point.

3rd pass
11.1 @ 143mph
Car ran solid but I knew it had more. I was getting more and more comfortable with it.

I decided I wasn't leaving till I went 10's.

So back to the lanes I went.

4th pass
10.74 @ 145
Car ran great. Small hiccup with the throttle.

https://vimeo.com/169040005

Found out the tps wires were held on by a couple strands on one or two wires.

Fixed that and am about to head back to get some more personal bests.

Wish me luck.


Sent from my iPhone using Tapatalk

Awesome write up and results!! 10.7 @ 145 is great. Eager to see what happens next!!

PetefromtheStreets
06-07-2016, 08:48 AM
http://uploads.tapatalk-cdn.com/20160607/f5ae658836ba73794fce7be6566ab076.jpg
http://uploads.tapatalk-cdn.com/20160607/1c91351b97e0c4c2341ca57aba0ab411.jpg
http://uploads.tapatalk-cdn.com/20160607/119db0d6998eeb0615f61b9b1ed13c13.jpg

Well was going to race this weekend. But that's not going to happen.

Headed to exhaust shop this morning and my hood flew up. Busted up a bunch of stuff.


Sent from my iPhone using Tapatalk

BoostedK20
06-26-2016, 09:20 PM
http://uploads.tapatalk-cdn.com/20160607/f5ae658836ba73794fce7be6566ab076.jpg
http://uploads.tapatalk-cdn.com/20160607/1c91351b97e0c4c2341ca57aba0ab411.jpg
http://uploads.tapatalk-cdn.com/20160607/119db0d6998eeb0615f61b9b1ed13c13.jpg

Well was going to race this weekend. But that's not going to happen.

Headed to exhaust shop this morning and my hood flew up. Busted up a bunch of stuff.


Sent from my iPhone using Tapatalk

So crazy! Updates?

PetefromtheStreets
06-27-2016, 09:53 PM
So crazy! Updates?

Yea man. Definitely a scare. No updates as of yet. Body shop is taking their time I suppose. But I'd rather it be right than quick.


Sent from my iPhone using Tapatalk

PetefromtheStreets
06-27-2016, 10:17 PM
I suppose the update I could give is the car will come back with fresh paint all over and a bit of a shocker in there. I went back to having a Type R rep wing. The gf loves the wing and I found one for a cheap deal and got it to give a try.


I purchased some components for my new exhaust I am having made.

It's going to be an oval midpipe, to a pair of race muffler leading to the rear bumper.

http://uploads.tapatalk-cdn.com/20160628/043ac84c3dcbbcac3b99f81cc68632b8.jpg
http://uploads.tapatalk-cdn.com/20160628/59ddb478872fd205ea3ef5e5ca7d0075.jpghttp://uploads.tapatalk-cdn.com/20160628/a74b95f645536d40636832d07bc1e3b8.jpghttp://uploads.tapatalk-cdn.com/20160628/e25909bcc581872bb33022bf182a4d3a.jpg

The vibrant 9" will act as my resonator just before the rear LCA.

THE EXTENDED tip muffler will be my muffler exiting the rear bumper. I can't wait to see and hear the end result.


Sent from my iPhone using Tapatalk

BoostedK20
06-29-2016, 10:24 PM
I suppose the update I could give is the car will come back with fresh paint all over and a bit of a shocker in there. I went back to having a Type R rep wing. The gf loves the wing and I found one for a cheap deal and got it to give a try.


I purchased some components for my new exhaust I am having made.

It's going to be an oval midpipe, to a pair of race muffler leading to the rear bumper.

http://uploads.tapatalk-cdn.com/20160628/043ac84c3dcbbcac3b99f81cc68632b8.jpg
http://uploads.tapatalk-cdn.com/20160628/59ddb478872fd205ea3ef5e5ca7d0075.jpghttp://uploads.tapatalk-cdn.com/20160628/a74b95f645536d40636832d07bc1e3b8.jpghttp://uploads.tapatalk-cdn.com/20160628/e25909bcc581872bb33022bf182a4d3a.jpg

The vibrant 9" will act as my resonator just before the rear LCA.

THE EXTENDED tip muffler will be my muffler exiting the rear bumper. I can't wait to see and hear the end result.


Sent from my iPhone using Tapatalk

Paint surprise, ITR wing, and oval exhaust... all surprises that I didn't expect! Eager for updates!!

PetefromtheStreets
06-29-2016, 10:35 PM
Paint surprise, ITR wing, and oval exhaust... all surprises that I didn't expect! Eager for updates!!

Thanks man. Im eager toooo. Body shop told me to stop up there Saturday. So I'll snap some progress pics then.


Sent from my iPhone using Tapatalk

BoostedK20
07-02-2016, 09:32 AM
Today's the day for snapped body shop pics!

And...

:turbosmiley: HAPPY BIRTHDAY!!
http://www.blecouturecakes.com/wp-content/uploads/photo-gallery/Turbo-engine-cake.jpg

PetefromtheStreets
07-02-2016, 09:34 AM
Yessir. Body shop pics will surface around 1:30-2pm. I really really hope there is major progress done.


Sent from my iPhone using Tapatalk

BoostedK20
07-02-2016, 09:36 AM
Same!

PetefromtheStreets
07-03-2016, 11:23 AM
Ok so Saturday around 12 guy messages me. Says his wife's sick so he went home. Come tomorrow at 1.

Today guy messages me, his wife's not feeling better, come tomorrow.

So Monday I will go over and see the car I believe. If not, then I will be there Tuesday at lunch time no matter what.


Sent from my iPhone using Tapatalk

BoostedK20
07-16-2016, 08:59 AM
Ok so Saturday around 12 guy messages me. Says his wife's sick so he went home. Come tomorrow at 1.

Today guy messages me, his wife's not feeling better, come tomorrow.

So Monday I will go over and see the car I believe. If not, then I will be there Tuesday at lunch time no matter what.


Sent from my iPhone using Tapatalk

I saw some updated pics you posted. Hows things coming along now? I hate to say it, but with all these crooked shops and dishonest mechanics/workers today, I can't help but wonder if the wife excuse was legit. It's understandable. Things come up, it happens. Continued excuses are a whole 'nother story though. Hoping all is going well!

PetefromtheStreets
07-19-2016, 04:35 PM
I saw some updated pics you posted. Hows things coming along now? I hate to say it, but with all these crooked shops and dishonest mechanics/workers today, I can't help but wonder if the wife excuse was legit. It's understandable. Things come up, it happens. Continued excuses are a whole 'nother story though. Hoping all is going well!

Sup man. Same old shit. Cars not done and what was said to be done already hasn't been done. I'm growing tired. Very tired. Hate shops man.


Sent from my iPhone using Tapatalk

BoostedK20
07-27-2016, 09:43 AM
Sup man. Same old shit. Cars not done and what was said to be done already hasn't been done. I'm growing tired. Very tired. Hate shops man.


Sent from my iPhone using Tapatalk

How are things now?

PetefromtheStreets
08-05-2016, 06:00 PM
How are things now?

Slow rolling man. Cruised by the shop on Monday. Took a few pics.

http://uploads.tapatalk-cdn.com/20160805/fbf880302eddde2a5e78579ccb4ff244.jpg
http://uploads.tapatalk-cdn.com/20160805/623d0dfb9556e59f8814ab3cc836cf69.jpghttp://uploads.tapatalk-cdn.com/20160805/083b0fa7b55e49cf6ecf871ac2f1b865.jpghttp://uploads.tapatalk-cdn.com/20160805/b79e46c1cdcf0f1f172c72997ccac1a9.jpg

Then Wednesday night I finished up a friend of mines transmission.

He bought a full rebuild kit along with the carbon lined synchros.
http://uploads.tapatalk-cdn.com/20160805/f78ed9af341918887ada22920c49228e.jpg

Then I mounted up his flywheel and clutch http://uploads.tapatalk-cdn.com/20160805/53819dbf466623c26794570f08988b0c.jpg

And then we mated the trans and motor together but I do not have pictures of that. It was getting quite late.

Anyways stay tuned for finished bodywork pics and hopefully to get my friend on here posting pics of his setup and swap himself.


Sent from my iPhone using Tapatalk

PetefromtheStreets
08-07-2016, 12:01 AM
Got some updated pics today. Cars working its way through paint. http://uploads.tapatalk-cdn.com/20160807/addad5059f8a78970a06f3edaf90c557.jpghttp://uploads.tapatalk-cdn.com/20160807/4af047f1d21c62b2b61c8571ee562e12.jpghttp://uploads.tapatalk-cdn.com/20160807/70900aefa220b813c4929b03ae93c3c1.jpghttp://uploads.tapatalk-cdn.com/20160807/ab4228f33e0a02301660191887fa8c39.jpghttp://uploads.tapatalk-cdn.com/20160807/022a5b0b28044b79aef8b996352a665c.jpg


Sent from my iPhone using Tapatalk

PetefromtheStreets
08-07-2016, 09:47 PM
Well ..........she's back!!!!!
http://uploads.tapatalk-cdn.com/20160808/1ed602df97b14be0479407b6f06a826e.jpghttp://uploads.tapatalk-cdn.com/20160808/a61d0cdb16a0ca14682221a229013aa0.jpghttp://uploads.tapatalk-cdn.com/20160808/59c15d2f6c45deb09702f2c48089029f.jpghttp://uploads.tapatalk-cdn.com/20160808/39d664414bfe6f203e66c7c9ce2ab5d2.jpghttp://uploads.tapatalk-cdn.com/20160808/7466232d70826a9a40031d10339c55e9.jpghttp://uploads.tapatalk-cdn.com/20160808/a8e9d8524f5c896255099734fe4b409f.jpg


Sent from my iPhone using Tapatalk

Jonezy
08-08-2016, 10:10 AM
She finished?

Jonezy
08-08-2016, 11:03 AM
Ah I see it now, pics didn't load.

I love the attempt at covering the cooler lol

PetefromtheStreets
04-26-2017, 10:01 PM
What's up guys! I'm BACCCKKKK again!!

Cars been sitting for a good long while. Got her collecting dust while I was collecting parts.

In 2016 the race season started off well. I ran a 10.74 @145 my first day at the track. Switched the tires and drive back home. (Street car shit!)

Ran at a few events and as we got closer to summer the car started experiencing a high boost break up. So I changed plugs and nothing. Swapped cool packs and nothing, well finally I found it. HEADGASKET! I hate doing that type of work while the motors in the car but did it anyways.

She's back together now and I have done some part changes that I'd like to share with you all.

First up!

I sold my radiator, FMIC and piping as well as my skunk2 ultra Intake manifold.

I upgraded all of those parts as you'll see.

I went with the skunk2 ultra centerfeed Intake manifold now, same 90mm tb

Going with a skunk2 alpha radiator from a 92-95 civic.

KLM Fabrication intercooler and piping

Hondata Traction control which I bought off another member on here. Shout outs to you with the home boy hook up per usual!!!

Upgraded to FID 2000cc injectors thanks to Shanket for that hook up.

Bought hood risers which I never thought I'd buy but to increase heat evacuation I'll do it.

Various fittings to plumb the new rad setup.

AEM Flex fuel sensor, I won it off a parts raffle on FB. Dopeness!

And that's about it! I'm going to E85 if you hadn't guessed by now. I'm going to be redoing the whole fuel system this winter to allow for some really big power on ethanol.

I'll be headed back to Treblic for my e85/93 pump tune shortly. So stay tuned for progress.

On to the pics....

https://uploads.tapatalk-cdn.com/20170427/ba9957e14c296999d87784f5b0fdd7f7.png
https://uploads.tapatalk-cdn.com/20170427/6ced6c78baa12587b455251f1a41223f.jpg
https://uploads.tapatalk-cdn.com/20170427/d61ddc0143374f495e1ba0ea9e91da9c.jpghttps://uploads.tapatalk-cdn.com/20170427/16adf6fb2164711f9fb4e4681775cc89.jpg
https://uploads.tapatalk-cdn.com/20170427/28d41e8cb0b84dd1fd43e84377b873ae.jpghttps://uploads.tapatalk-cdn.com/20170427/69c4da4b8b417711acac1c22122b5c9e.jpghttps://uploads.tapatalk-cdn.com/20170427/bffd5ebb55b39b33d497995a45a689e5.jpghttps://uploads.tapatalk-cdn.com/20170427/c01c87424a180ba9475ec8eaf3d844c3.jpghttps://uploads.tapatalk-cdn.com/20170427/fb939751714e4886458bbd0074b9b74a.jpghttps://uploads.tapatalk-cdn.com/20170427/e513efcaa0ae101e266c3c918ef889b6.jpghttps://uploads.tapatalk-cdn.com/20170427/448b150e234e72df15285287c2fc071d.jpghttps://uploads.tapatalk-cdn.com/20170427/6bc77a19fbe3419d0f24d23503e2f779.jpghttps://uploads.tapatalk-cdn.com/20170427/b9c986812acd96bd6e4f7daf35d7ad60.pnghttps://uploads.tapatalk-cdn.com/20170427/0b6987184f93b6fa429539f051d7c58c.png

Pics are in complete random order. The track pics are the tail end of last season. Stay tuned!!

BoostedK20
05-04-2017, 08:15 AM
Love the photos, and glad you're back! Elated that baby K is healthy and doing well :thumb: This is going to be a fun season!!

BoostedK20
10-18-2017, 05:04 PM
Time to update with the Comp 6767 news! :lildevil:

PetefromtheStreets
10-18-2017, 06:47 PM
Sorry I have been gone so long guys. A lot has gone on in life to remove me from frequent posting lately.

Here are some updates as follows:

I was rolling around with a friend in his K swap Teg and I wanted to get a little fly by video of the car. So I took and downshifted and let her eat.

Well.... it sounds like a missed gear but really what you hear is me breaking a shift fork while snagging 3rd gear.

So..

I dropped the trans to install a shift fork I had modified (thanks for the advice from the owner of Power Proven in FL). And threw her back together. In the process I had decided that it was the perfect time to upgrade turbos since I’m looking to hit the 850+whp mark at my next dyno session.

https://uploads.tapatalk-cdn.com/20171018/4cf224732ae1eb1c90478b938bc39be8.jpg
https://uploads.tapatalk-cdn.com/20171018/0db24d0ad95743ffe3b9aefa4bd2deaf.jpg
https://uploads.tapatalk-cdn.com/20171018/5542be0b95b9ee2051e9f20449dd06f3.jpg


I don’t really know how to upload videos anymore. I’ve been out of practice lately. Once I Can I will post the video of why I needed to drop the trans as well as a start up with the new turbo.

Side note:

I’ve begun tuning with VitViper again and will post how that is going. So far just from the second calibration the cars running extremely smooth at low rpm considering the things got a 90mm tb and a large centerfeed Intake manifold.

Lmk what you all think.





Sent from my iPhone using Tapatalk

builtfa5ftw
10-27-2017, 10:44 AM
Awesome man, keep it up.

Sent from my SAMSUNG-SM-G891A using Tapatalk