PDA

View Full Version : New Member! K20A Ep3 431whp street car!



SilverBullet_Ep3
12-10-2014, 04:15 PM
UPDATE: Interior pics on page 2 & few build pics on page 4...


Whats up guys. My name is Luis and Im from NJ. Heres a quick run down of my pride and joy. The car was built by myself from the ground up. Motor was built by Larry at Pro-Motion Race Engines and tuned by the man Yosolo. Car made 431whp @15psi 93 pump gas on the dyno but boost creeps to 19psi on the road. Heres the spec list and just a few pics I have. I plan to do a build thread soon so stay tuned. Hope you enjoy.

Motor:
ITR K20a Type R
Type R Cams
Supertech Titanium dished Valves
Supertech Titanium valve seats
Supertech dual valve springs
CP Pistons 86.5mm 9.0 cr
Manley Turbo Tuff rods
Mahle Clevite race bearings
OEM chains
OEM guides
OEM tensioner
Precision 5831 Turbo
BWR T3 sidewinder manifold
Tial MVS 38mm wastegate
Tial 60mm BOV
ID1000 injectors
Ktuned fuel rail
Ktuned fuel pressure gauge
Aeromotive A1000 fpr
Eagle oil feed plate
Ktuned gaskets
DW65c fuel pump
Earls 10 micron fuel filter
Russell 6an fuel lines (feed & return)
Ktuned an fittings
Vibrant 2.5" piping
Vibrant couplers
Type R 6 speed trans
Type R oem LSD
Clutchmasters stage 4 clutch
Hybrid racing shifter cable bushings
Innovative 75a motor mounts
CXRacing Intercooler
MTEC Trans shifter race springs
SSR Engine torque damper
Samco Sport Radiator hoses
Ktuned AC/PS delete
Custom 3" downpipe (open)
open dump tube
Hondata Kpro

Exterior:
Type R headlights
6000k HID's
LED parking lights
Custom Cupra R Lip
OEM 04-05 sideskirts
Mugen Seibon carbon fiber wing
Custom DIY rear wiper delete
35% tints
Tinted taillights
LED plate lights

Interior:
Corbeou Forza seats
Corbeou 3inch 4 point harness
NRG steering wheel
NRG slim hub
NRG quick release
Buddy club short shifter
Corsport shifter base bushings
Custom radio delete
Broadway mirror
NRG harness bar
Custom X-brace designed by myself
Rear of the car is completely stripped and wire tucked. Painted and clear coated to match exterior paint.

Suspension:
Skunk2 Pro S coilovers
Custom spring lengths and spring rates
10kg front/ 8kg rears
Skunk2 rear camber kit
Spc front camber bolts
Beaks tie bar
Progress tie bar and sway bar

Wheels:
Old setup:
XXR 527 wheels
17x8.25 f/ 205_40 Falken 912's et20
17x9.75 r/ 215_40 Falken 912's et10

New setup:
ESM 007 Platinum edition wheels w/gold rivets
179 all around
215_40 Nankang Noble sport NS20
Front et 20
Rear et 5 (using 15mm H&R spacer)
H&R extended studs all around

Here are a few pics. Ill post more as go along

http://i1378.photobucket.com/albums/ah103/santiagofit/Silver%20Bullet/PicsArt_1411182929342_zpse83296af.jpg (http://s1378.photobucket.com/user/santiagofit/media/Silver%20Bullet/PicsArt_1411182929342_zpse83296af.jpg.html)

http://i1378.photobucket.com/albums/ah103/santiagofit/Silver%20Bullet/PicsArt_1411185064124_zpse2c641c9.jpg (http://s1378.photobucket.com/user/santiagofit/media/Silver%20Bullet/PicsArt_1411185064124_zpse2c641c9.jpg.html)

A pic someone took down at H2oi in Maryland
http://i1378.photobucket.com/albums/ah103/santiagofit/Silver%20Bullet/PicsArt_1414108360775_zps36858c14.jpg (http://s1378.photobucket.com/user/santiagofit/media/Silver%20Bullet/PicsArt_1414108360775_zps36858c14.jpg.html)

http://i1378.photobucket.com/albums/ah103/santiagofit/Silver%20Bullet/PicsArt_1412459698412_zps90ed6fbb.jpg (http://s1378.photobucket.com/user/santiagofit/media/Silver%20Bullet/PicsArt_1412459698412_zps90ed6fbb.jpg.html)

http://i1378.photobucket.com/albums/ah103/santiagofit/Silver%20Bullet/PicsArt_1415080678712_zps76fde0d0.jpg (http://s1378.photobucket.com/user/santiagofit/media/Silver%20Bullet/PicsArt_1415080678712_zps76fde0d0.jpg.html)

And heres quick pic I snapped after fitting the new wheels and test drive

http://i1378.photobucket.com/albums/ah103/santiagofit/Mobile%20Uploads/PicsArt_1418154681310_zps6ddfc024.jpg (http://s1378.photobucket.com/user/santiagofit/media/Mobile%20Uploads/PicsArt_1418154681310_zps6ddfc024.jpg.html)

Dyno vid: https://www.youtube.com/watch?v=UHFo32VPXyo

monjarassi
12-10-2014, 07:31 PM
good stuff welcome

SilverBullet_Ep3
12-10-2014, 08:22 PM
good stuff welcome

Thanx bro

Spaz
12-14-2014, 12:57 PM
welcome to the forums. Looks like a nice build for sure

SilverBullet_Ep3
12-19-2014, 03:27 AM
welcome to the forums. Looks like a nice build for sure

Thanx bro. Definitely been a lot of work but its all been worth it.

SilverBullet_Ep3
12-19-2014, 03:46 AM
Update: Here is a quick vid of her on the dyno. Enjoy


https://www.youtube.com/watch?v=UHFo32VPXyo

skthompson16
12-23-2014, 06:41 PM
Looking good man! I like how you kept it low and turbo'd and she sounds good! love the wheels

SilverBullet_Ep3
12-25-2014, 08:30 PM
Looking good man! I like how you kept it low and turbo'd and she sounds good! love the wheels

Thanks dude. I got the best of both worlds. I'm all about keeping it clean and classy. Stanced out for the shows and a lil' go for those who want to try me on the streets lol Stay tuned for some more pics. Will have a few of the interior soon.

builtfa5ftw
12-25-2014, 09:23 PM
i really like what you did with your car man.

SilverBullet_Ep3
12-26-2014, 02:11 AM
i really like what you did with your car man.

Thanx bro.

builtfa5ftw
12-26-2014, 02:30 AM
Thanx bro.

No problem

SilverBullet_Ep3
12-26-2014, 08:04 PM
Update:

So the day turned out nice so I took the Bullet out for a spin and while I was at it I decided to take a few pics of the interior. Hope you guys enjoy

http://i1378.photobucket.com/albums/ah103/santiagofit/Mobile%20Uploads/PicsArt_1419628920548_zpsefbb25e2.jpg (http://s1378.photobucket.com/user/santiagofit/media/Mobile%20Uploads/PicsArt_1419628920548_zpsefbb25e2.jpg.html)

http://i1378.photobucket.com/albums/ah103/santiagofit/Mobile%20Uploads/PicsArt_1419628727691_zps6cdfa8ae.jpg (http://s1378.photobucket.com/user/santiagofit/media/Mobile%20Uploads/PicsArt_1419628727691_zps6cdfa8ae.jpg.html)

http://i1378.photobucket.com/albums/ah103/santiagofit/Mobile%20Uploads/PicsArt_1419628648672_zps7d6dd93c.jpg (http://s1378.photobucket.com/user/santiagofit/media/Mobile%20Uploads/PicsArt_1419628648672_zps7d6dd93c.jpg.html)

http://i1378.photobucket.com/albums/ah103/santiagofit/Mobile%20Uploads/PicsArt_1419628866007_zps75681ea1.jpg (http://s1378.photobucket.com/user/santiagofit/media/Mobile%20Uploads/PicsArt_1419628866007_zps75681ea1.jpg.html)

http://i1378.photobucket.com/albums/ah103/santiagofit/Mobile%20Uploads/PicsArt_1419628793615_zpsa599eecd.jpg (http://s1378.photobucket.com/user/santiagofit/media/Mobile%20Uploads/PicsArt_1419628793615_zpsa599eecd.jpg.html)

http://i1378.photobucket.com/albums/ah103/santiagofit/Mobile%20Uploads/PicsArt_1419628891201_zpsf55aa714.jpg (http://s1378.photobucket.com/user/santiagofit/media/Mobile%20Uploads/PicsArt_1419628891201_zpsf55aa714.jpg.html)

http://i1378.photobucket.com/albums/ah103/santiagofit/Mobile%20Uploads/PicsArt_1419628757493_zps6dd74ade.jpg (http://s1378.photobucket.com/user/santiagofit/media/Mobile%20Uploads/PicsArt_1419628757493_zps6dd74ade.jpg.html)

http://i1378.photobucket.com/albums/ah103/santiagofit/Mobile%20Uploads/PicsArt_1419628691602_zpsefc2194c.jpg (http://s1378.photobucket.com/user/santiagofit/media/Mobile%20Uploads/PicsArt_1419628691602_zpsefc2194c.jpg.html)

builtfa5ftw
12-26-2014, 08:18 PM
Update:

So the day turned out nice so I took the Bullet out for a spin and while I was at it I decided to take a few pics of the interior. Hope you guys enjoy



wow. i really like it man, looks good.
straight race car

SilverBullet_Ep3
12-26-2014, 08:32 PM
wow. i really like it man, looks good.
straight race car

Thanx bro. And yea it pretty much is a few steps short of a race car lol

builtfa5ftw
12-26-2014, 08:58 PM
Thanx bro. And yea it pretty much is a few steps short of a race car lol

do you have anymore plans for the car?

SilverBullet_Ep3
12-26-2014, 09:12 PM
do you have anymore plans for the car?

There's always ideas floating around in my head. lol Originally the plan was to build an all out track car but I love driving the car so much that I decided to build a nice street/race car. Future plans are a Precision 6262 and an inline Bosch 044. With that ill also upgrade the fuel feed line to an 8an. Keeping the 6an return. Looking into a Raptor shift light. Just little things like that. Nothing major. I just bought an 8th Gen Accord that I want to do a few things to also so I might put the Ep on Pause for a few months. lol

builtfa5ftw
12-26-2014, 09:21 PM
There's always ideas floating around in my head. lol Originally the plan was to build an all out track car but I love driving the car so much that I decided to build a nice street/race car. Future plans are a Precision 6262 and an inline Bosch 044. With that ill also upgrade the fuel feed line to an 8an. Keeping the 6an return. Looking into a Raptor shift light. Just little things like that. Nothing major. I just bought an 8th Gen Accord that I want to do a few things to also so I might put the Ep on Pause for a few months. lol


yea I feel you. love the car though are you rocking the black wheels (are the xxr 527?) or the silver wheels (what are they?)
I really want to pick up a old clean honda I'm open to several models but really want a EG hatch or a accord wagon, or EP3 then ill work on k swapping it, but not the EP3 but id throw in the motor parts I have laying around, and just DD it and be able to put all my time into my car.

SilverBullet_Ep3
12-26-2014, 09:54 PM
yea I feel you. love the car though are you rocking the black wheels (are the xxr 527?) or the silver wheels (what are they?)
I really want to pick up a old clean honda I'm open to several models but really want a EG hatch or a accord wagon, or EP3 then ill work on k swapping it, but not the EP3 but id throw in the motor parts I have laying around, and just DD it and be able to put all my time into my car.

No the XXR's are the old ones. I am currently running the ESM Platinum Edition 007's. Yea Ive always wanted an EK but I cant let my EP go. Ive had the car car for 6 years and it started as my daily. Swapped in the ITR motor and ran it like that until last year when I decided to do a high compression boost build. Motor blew a few months later and then I took the plunge and decided to do a fully built motor. The only thin I didnt touch on the motor were the sleeves and cams. I was only looking for 450-500whp and hit my goal easily. I would say get an EP but i own one so Im a lil biased lol. However I cant begin to tell you how much people sleep on Ep3's. Thats the whole reason I decided on the platform to begin with. Not too many people have built these. They are like the redheaded stepchild of the honda world. lol

builtfa5ftw
12-26-2014, 10:06 PM
They are like the redheaded stepchild of the honda world. lol

thats the best thing iver ever heard, but its so true.
id really like one to have as a DD but the accord wagon k swapped is like my dream car lol,

SilverBullet_Ep3
12-26-2014, 10:10 PM
thats the best thing iver ever heard, but its so true.
id really like one to have as a DD but the accord wagon k swapped is like my dream car lol,

See now that sir... Would be unique. I'm all about being different from the rest but keeping it clean and classy. People always give me props on the ep even tho they hate em lol I say u go for that Accord wagon!

builtfa5ftw
12-26-2014, 10:38 PM
See now that sir... Would be unique. I'm all about being different from the rest but keeping it clean and classy. People always give me props on the ep even tho they hate em lol I say u go for that Accord wagon!

i think a simple k24 with 2012+ si pistons and ported head with D.C. 2.2 cams (maybe 3.2) and full bolt on i want to keep it DD-able and really reliable as it will be my family car.

SilverBullet_Ep3
12-26-2014, 10:44 PM
i think a simple k24 with 2012+ si pistons and ported head with D.C. 2.2 cams (maybe 3.2) and full bolt on i want to keep it DD-able and really reliable as it will be my family car.

Damn! That'll be a pretty sweet family car! Lol

builtfa5ftw
12-26-2014, 10:50 PM
I know right, its just my car is almost too far while being able to drive my baby (come February) around.
sorry for thread jacking

SilverBullet_Ep3
12-26-2014, 10:59 PM
I know right, its just my car is almost too far while being able to drive my baby (come February) around.
sorry for thread jacking

No worries dude. It's a good.

builtfa5ftw
12-26-2014, 11:04 PM
No worries dude. It's a good.

ok man, thanks.
where are you located

SilverBullet_Ep3
12-26-2014, 11:16 PM
ok man, thanks.
where are you located

Central Jersey. Newark area.

builtfa5ftw
12-26-2014, 11:20 PM
well sh!t.
i was gonna say will you give me a ride? well I'm in Oklahoma.

SilverBullet_Ep3
12-27-2014, 12:01 AM
well sh!t.
i was gonna say will you give me a ride? well I'm in Oklahoma.

Yea just a little too far. lol

builtfa5ftw
12-27-2014, 01:21 AM
yea agreed lol

skthompson16
12-27-2014, 01:56 AM
Loving the radio delete plate! where did you put your battery? im looking to battery relocation and im looking at ideas?

SilverBullet_Ep3
12-27-2014, 03:26 AM
Loving the radio delete plate! where did you put your battery? im looking to battery relocation and im looking at ideas?

Thanx man. The battery is actually directly behind the passenger side seat. Put it there to make it easier to disconnect if I need to. Eventually I will invest in a smaller race battery and make a custom bracket to hold it in place. If you look closely at some of the pics you can kinda see it.

builtfa5ftw
12-27-2014, 04:05 AM
Thanx man. The battery is actually directly behind the passenger side seat. Put it there to make it easier to disconnect if I need to. Eventually I will invest in a smaller race battery and make a custom bracket to hold it in place. If you look closely at some of the pics you can kinda see it.

I just went and looked yea i can see it in a couple pics. its a really good place man.

SilverBullet_Ep3
12-27-2014, 04:11 AM
I just went and looked yea i can see it in a couple pics. its a really good place man.

Yea it's almost like having a battery on/off switch. Except I have a quick release battery terminal so I can quickly get it off if I need to since it's easy to reach.

builtfa5ftw
12-27-2014, 04:15 AM
Yea it's almost like having a battery on/off switch. Except I have a quick release battery terminal so I can quickly get it off if I need to since it's easy to reach.

yea I feel ya I might relocate mine to like the center console when I'm all race car'ed out

skthompson16
12-27-2014, 10:07 AM
Thanx man. The battery is actually directly behind the passenger side seat. Put it there to make it easier to disconnect if I need to. Eventually I will invest in a smaller race battery and make a custom bracket to hold it in place. If you look closely at some of the pics you can kinda see it.

Word! I see it hiding in there now! That's a good idea because it kinda centralizes its location, so you can route power to anything

SilverBullet_Ep3
12-27-2014, 06:28 PM
Word! I see it hiding in there now! That's a good idea because it kinda centralizes its location, so you can route power to anything

Yea pretty much lol

SilverBullet_Ep3
12-27-2014, 09:31 PM
Got bored at work so I decided to post a few build pics of the build after boosting the ITR motor and grenading it lol Thought about a build thread but realized I don't have many pics so here ya go... Enjoy

Old setup being pulled out:

http://i1378.photobucket.com/albums/ah103/santiagofit/Mobile%20Uploads/IMG_6526_zps2n5x0ejm.jpg (http://s1378.photobucket.com/user/santiagofit/media/Mobile%20Uploads/IMG_6526_zps2n5x0ejm.jpg.html)

Talking to my Engine Builder after we took it apart and found out the cause of the motor blowing:

http://i1378.photobucket.com/albums/ah103/santiagofit/Mobile%20Uploads/IMG_5208_zps8ywvymuv.jpg (http://s1378.photobucket.com/user/santiagofit/media/Mobile%20Uploads/IMG_5208_zps8ywvymuv.jpg.html)

The cause :thumbdown:

http://i1378.photobucket.com/albums/ah103/santiagofit/Mobile%20Uploads/IMG958673_zpsaxp2w0pm.jpg (http://s1378.photobucket.com/user/santiagofit/media/Mobile%20Uploads/IMG958673_zpsaxp2w0pm.jpg.html)

The block all cleaned up and ready for assembly:

http://i1378.photobucket.com/albums/ah103/santiagofit/Mobile%20Uploads/IMG954456_zpsn0cx6hde.jpg (http://s1378.photobucket.com/user/santiagofit/media/Mobile%20Uploads/IMG954456_zpsn0cx6hde.jpg.html)

Head ported and polished:

http://i1378.photobucket.com/albums/ah103/santiagofit/Mobile%20Uploads/IMG_6850_zps4wddkvo6.jpg (http://s1378.photobucket.com/user/santiagofit/media/Mobile%20Uploads/IMG_6850_zps4wddkvo6.jpg.html)

All Honda OEM parts were used for the Chains, Tensioners,guides, etc:

http://i1378.photobucket.com/albums/ah103/santiagofit/Mobile%20Uploads/IMG_8438_zpsmimt18yp.jpg (http://s1378.photobucket.com/user/santiagofit/media/Mobile%20Uploads/IMG_8438_zpsmimt18yp.jpg.html)

Block assembled and ready:

http://i1378.photobucket.com/albums/ah103/santiagofit/Mobile%20Uploads/IMG956558_zpsi9a8syaa.jpg (http://s1378.photobucket.com/user/santiagofit/media/Mobile%20Uploads/IMG956558_zpsi9a8syaa.jpg.html)

http://i1378.photobucket.com/albums/ah103/santiagofit/Mobile%20Uploads/IMG_8088_zpse1xaxh1e.jpg (http://s1378.photobucket.com/user/santiagofit/media/Mobile%20Uploads/IMG_8088_zpse1xaxh1e.jpg.html)

http://i1378.photobucket.com/albums/ah103/santiagofit/Mobile%20Uploads/IMG_6474_zpscn2twsyz.jpg (http://s1378.photobucket.com/user/santiagofit/media/Mobile%20Uploads/IMG_6474_zpscn2twsyz.jpg.html)

The day it was finally ready for me to take home and put it back in the Bullet... I was'nt excited at all lol :party:

http://i1378.photobucket.com/albums/ah103/santiagofit/Mobile%20Uploads/IMG_7344_zpschhl27ef.jpg (http://s1378.photobucket.com/user/santiagofit/media/Mobile%20Uploads/IMG_7344_zpschhl27ef.jpg.html)

Back at my garage the Turbo,Manifold, and Throttle body painting to match using High temp Engine paint. OEM+ :cheers:

http://i1378.photobucket.com/albums/ah103/santiagofit/Mobile%20Uploads/20140816_184230_zpsdvovjz3e.jpg (http://s1378.photobucket.com/user/santiagofit/media/Mobile%20Uploads/20140816_184230_zpsdvovjz3e.jpg.html)

Clutch Masters Stage 4 clutch used:

http://i1378.photobucket.com/albums/ah103/santiagofit/Mobile%20Uploads/20140829_155250_zpsir6ugq8v.jpg (http://s1378.photobucket.com/user/santiagofit/media/Mobile%20Uploads/20140829_155250_zpsir6ugq8v.jpg.html)

Working through the night with the help of a great friend to get the final assembly and motor put into the car:

http://i1378.photobucket.com/albums/ah103/santiagofit/IMG957403_zpsaxtwlzb6.jpg (http://s1378.photobucket.com/user/santiagofit/media/IMG957403_zpsaxtwlzb6.jpg.html)

http://i1378.photobucket.com/albums/ah103/santiagofit/Mobile%20Uploads/20140830_175448_zpssgfn5duo.jpg (http://s1378.photobucket.com/user/santiagofit/media/Mobile%20Uploads/20140830_175448_zpssgfn5duo.jpg.html)

Final assembly stages:

http://i1378.photobucket.com/albums/ah103/santiagofit/Mobile%20Uploads/20140831_160840_zpswtnx1p7l.jpg (http://s1378.photobucket.com/user/santiagofit/media/Mobile%20Uploads/20140831_160840_zpswtnx1p7l.jpg.html)

Worked through the night and got her done:

http://i1378.photobucket.com/albums/ah103/santiagofit/Mobile%20Uploads/20140901_094815_zpsplblamyp.jpg (http://s1378.photobucket.com/user/santiagofit/media/Mobile%20Uploads/20140901_094815_zpsplblamyp.jpg.html)

http://i1378.photobucket.com/albums/ah103/santiagofit/Mobile%20Uploads/20140901_101418_zpsmkqhpen1.jpg (http://s1378.photobucket.com/user/santiagofit/media/Mobile%20Uploads/20140901_101418_zpsmkqhpen1.jpg.html)

All done and ready to be tuned by the man himself Yosolo:

http://i1378.photobucket.com/albums/ah103/santiagofit/Mobile%20Uploads/20140904_140228_zpsuxuv9tvz.jpg (http://s1378.photobucket.com/user/santiagofit/media/Mobile%20Uploads/20140904_140228_zpsuxuv9tvz.jpg.html)

http://i1378.photobucket.com/albums/ah103/santiagofit/Mobile%20Uploads/IMG_3808_zpsyqugvd3q.png (http://s1378.photobucket.com/user/santiagofit/media/Mobile%20Uploads/IMG_3808_zpsyqugvd3q.png.html)

http://i1378.photobucket.com/albums/ah103/santiagofit/Mobile%20Uploads/IMG957560_zpssry3oobo.jpg (http://s1378.photobucket.com/user/santiagofit/media/Mobile%20Uploads/IMG957560_zpssry3oobo.jpg.html)

A few things had to be cleaned up but the finished results were posted on page one of this thread. Huge thanks to My girl Kathy, her father, and her engine builder for helping me finish this project. Without these three this build would still be sitting. Hope you all enjoyed. Stay tuned for more pics once the summer comes back around. Thank you :vtec:

builtfa5ftw
12-27-2014, 10:12 PM
Nice man.
I like progression type of posts. So who did you port and polish head?
do you plan on upgrading your manifold?
I'll be updating mine tomorrow I'm going to my car to try and finish up getting it ready to move to my brothers shop to finish everything.

SilverBullet_Ep3
12-27-2014, 10:35 PM
Nice man.
I like progression type of posts. So who did you port and polish head?
do you plan on upgrading your manifold?
I'll be updating mine tomorrow I'm going to my car to try and finish up getting it ready to move to my brothers shop to finish everything.

The head was done by my engine builder Larry at Pro-Motion Race Engines located in East Hanover NJ. The guy does insane work. He does everything himself. A one man team. As far as the manifold goes I would like to upgrade it at some point. I leaning towards the Skunk2 Ultra series manifold and paired up with a 70mm TB and Drag Cartel cams. but that'll be later on. I'm happy with the power the car makes now and I'm spinning through 1st, 2nd, (pretty much non existant) lol and a lil in 3rd so I dunno if its even worth it. lol I guess time will tell. Keep me posted when you post up new pics.

builtfa5ftw
12-27-2014, 10:48 PM
i will man i updated the "progression post" with new goodies. and tomorrow ill have current pics of my car

SilverBullet_Ep3
12-27-2014, 11:05 PM
i will man i updated the "progression post" with new goodies. and tomorrow ill have current pics of my car

Ok ill check it out tomorro.

builtfa5ftw
12-27-2014, 11:10 PM
Thanks man

monjarassi
12-27-2014, 11:16 PM
wow looking real good, i know that feel of having a new motor, and love the cleaniness in the hatch

SilverBullet_Ep3
12-28-2014, 02:23 AM
wow looking real good, i know that feel of having a new motor, and love the cleaniness in the hatch

Thanx bro. I know dude. Its crazy to think that your motor is literally brand new lol. The hatch is def one of my favorite parts of the car. The way I see it is everybody guts their cars nowadays but not many take the extra time to remove all the sound deadening material and paint and clear coat the inside. I even took the time to tuck all the tail light wiring that ran across the sides of the hatch in between the inner and outer panels of the car. I wanted it to be functional weight reduction but still turn heads at shows. So with the help of a friend who owns a body shop we made it happen.

SilverBullet_Ep3
01-22-2015, 07:51 PM
Took the bullet out for a spin today since it was nice out. Close up shot of the wheels and the new BWR Neo Chrome lugs...

http://i1378.photobucket.com/albums/ah103/santiagofit/PicsArt_1421967358839_zpsf9hjkeun.jpg (http://s1378.photobucket.com/user/santiagofit/media/PicsArt_1421967358839_zpsf9hjkeun.jpg.html)

Spaz
01-23-2015, 10:49 AM
so much bling on that wheel! Gorgeous

SilverBullet_Ep3
01-25-2015, 07:53 PM
so much bling on that wheel! Gorgeous

Thanx man.. I wasn't too sure if id like that much bling but once they were on the car I was sold :woot:

builtfa5ftw
01-26-2015, 01:23 AM
They look dope man

SilverBullet_Ep3
01-26-2015, 02:23 AM
They look dope man

Thanx bro! :thumb:

builtfa5ftw
01-28-2015, 11:38 AM
Thanx bro! :thumb:
No problem.