View Full Version : Xander's RSX
Xander
05-07-2014, 11:31 PM
Xander's Car
Engine:
K24a1 Motor
Injen CAI
Hondata IMG
Private Label Header
Kteller 3inch exhaust piping with Vibrant Flat Black muffler
Kpro
Transmission:
Kevlar Clutch Disk
Stage 3 pressure plate
Mtec Race Springs
Ktuned Clutch Line
Ktuned Shift Cables
Suspension/Brakes:
Buddy Club Racing Spec Dampers
Truhart rear camber kit
Enkei PF01SS 17x9 +35
Ray's Engineering Lug Nuts
BF Goodrich G-Force Comp2 255/40/17
TL-S Brembo front calipers
Centric rotors/ Stoptech pads
Goodridge SS brake lines
Innovative 85a mounts. Custom black on black
Exterior/Interior:
05/06 front end
05/06 Rear deck lid spoiler
05/06 Type-S side skirts
Rear wiper delete
Stätus racing seat
S2k push start with AFH harness
Twist Red Stitched Shift Boot
Karcepts Delrin shift knob
Spoon Sports Blue Mirror
Anointed Aero splitter brackets
Misc:
A/C delete
Cruise Control delete
Battery relocation with Odyssey PC680
Current Pics:
http://i.imgur.com/diwQuyi.jpg
http://i.imgur.com/afMIw9G.jpg
http://i.imgur.com/0sbRcAB.jpg
http://i.imgur.com/BhxQPyx.jpg
Sent from my iPhone 6
monjarassi
05-07-2014, 11:38 PM
hell yea enkei wheels always a plus in my book!!
Welcome aboard
Xander
05-07-2014, 11:40 PM
hell yea enkei wheels always a plus in my book!!
Welcome aboard
Psh I've been on board :coffee:
Jk thanks bro ilu :love:
monjarassi
05-07-2014, 11:41 PM
i know i see everything
Xander
05-07-2014, 11:45 PM
Got some Anointed Aero Splitter Brackets too. Super high quality pieces, I do recommend
http://i.imgur.com/SKOhaTp.jpg
Xander
05-07-2014, 11:50 PM
I also picked these up after work for a not-so-distant project :awwyea:
http://i.imgur.com/GRYNs04.jpg
Xander
05-07-2014, 11:50 PM
i know i see everything
How's the EP3 treating you?
monjarassi
05-07-2014, 11:51 PM
like a boss, hey how do u mount those, im scooping a set for mine
Xander
05-07-2014, 11:56 PM
like a boss, hey how do u mount those, im scooping a set for mine
They mount to the two front subframe bolts, they're very solid
monjarassi
05-08-2014, 12:00 AM
im excited now
Xander
05-08-2014, 12:01 AM
im excited now
Josh (AnointedDC5) is a great guy to work with too
monjarassi
05-08-2014, 12:06 AM
Josh (AnointedDC5) is a great guy to work with too
sho is, i been txting wif him
ryaano18
05-08-2014, 12:47 AM
I also picked these up after work for a not-so-distant project :awwyea:
http://i.imgur.com/GRYNs04.jpg
hmmmm shot in the dark... oem hid ballast pigtails?
cars looks great sub'd
Xander
05-08-2014, 06:13 AM
hmmmm shot in the dark... oem hid ballast pigtails?
cars looks great sub'd
Yes sir, exactly. And thank you, I appreciate it
that is a lot of blocks of wood man... kinda scary... you should buy a second jack, one to lift the car (low profile) and a taller one to get the car high enough SAFELY
Xander
05-08-2014, 09:55 AM
that is a lot of blocks of wood man... kinda scary... you should buy a second jack, one to lift the car (low profile) and a taller one to get the car high enough SAFELY
Hahaha that was just making sure that the subframe didn't move while I installed the splitter brackets. I have a lift in my garage that was holding the car up
:cheers: Ok I feel better now lol
Xander
05-08-2014, 10:13 AM
You commented on an Instagram picture of my "floating car"
Sent from my SAMSUNG-SM-G900A using Tapatalk
iThinkImJoey
05-08-2014, 05:02 PM
no fender liners?
Xander
05-08-2014, 05:13 PM
no fender liners?
I'm sorry, fender liners? What are those?
iThinkImJoey
05-08-2014, 05:43 PM
I'm sorry, fender liners? What are those?
Oh yeah i forgot you have a racecar
Xander
05-08-2014, 05:47 PM
Oh yeah i forgot you have a racecar
We can't all live in the lap of luxury like yourself
iThinkImJoey
05-08-2014, 05:48 PM
I drive an acura das luxury
Xander
05-08-2014, 05:51 PM
I drive an acura das luxury
I drive an Acura too. It's terribly unluxurious though. Tough to get into, vibrates a lot
iThinkImJoey
05-08-2014, 05:52 PM
I drive an Acura too. It's terribly unluxurious though. Tough to get into, vibrates a lot
I wish i had a giant vibrator also. Mine vibrates also, but not as much because i just have inserts
Xander
05-08-2014, 05:53 PM
I wish i had a giant vibrator also. Mine vibrates also, but not as much because i just have inserts
85a's ftw?
iThinkImJoey
05-08-2014, 05:54 PM
85a's ftw?
I like wheel hop though. its the closest thing to an earthquake i can experience
Xander
05-08-2014, 05:56 PM
I like wheel hop though. its the closest thing to an earthquake i can experience
I like vibrations... I can't afford a massage chair
02civic629
05-08-2014, 06:33 PM
car looks soooo functional....... love it :awwyeah:
Xander
05-08-2014, 07:06 PM
car looks soooo functional....... love it :awwyeah:
Thanks boo :love:
monjarassi
05-08-2014, 07:07 PM
Hey I have fender liners. Like a boss
Xander
05-08-2014, 07:12 PM
Got some JDM bling today
http://i.imgur.com/SXMytiT.jpg
http://i.imgur.com/h7T72TG.jpg
Xander
05-08-2014, 07:16 PM
Hey I have fender liners. Like a boss
I have to figure out something for my intake but otherwise it's been no big deal
iThinkImJoey
05-08-2014, 07:17 PM
Got some JDM bling today
http://i.imgur.com/SXMytiT.jpg
http://i.imgur.com/h7T72TG.jpg
#clubrsx
Xander
05-08-2014, 07:21 PM
#clubrsx
#teamLoza
Xander
05-08-2014, 08:52 PM
A picture of a splitter blade mockup:
http://i.imgur.com/3BZ6ydu.jpg
Xander
05-08-2014, 10:15 PM
Thanks man!
Sent from my SAMSUNG-SM-G900A using Tapatalk
i wanted that mirror myself. Where'd you get it?
Xander
05-08-2014, 10:39 PM
i wanted that mirror myself. Where'd you get it?
I got it off Kamispeed.com
How wide is it compared to stock? Looks pretty good?
Xander
05-09-2014, 09:27 AM
How wide is it compared to stock? Looks pretty good?
Same width as stock, it fits right on top of the stock mirror, inside the black casing. I love how it looks, and it definitely has a wider field of vision
I know the size is the same it goes over the mirror. It's suppose to be a wideview mirror.. so I meant how wide is it as in how much wider is the viewing area lol but yes thank you :)
vdubkilla
05-09-2014, 09:42 AM
Nice mirror man all I see when I look in my rear view mirror is a bunch of vibration haha it's at times very difficult to determine what is behind me :shrug: seems like the popo knows this as they have gotten me twice blending in traffic behind me :bsflag:.
Xander
05-09-2014, 09:50 AM
I know the size is the same it goes over the mirror. It's suppose to be a wideview mirror.. so I meant how wide is it as in how much wider is the viewing area lol but yes thank you :)
I can see the edges of both my rear windows, if that tells you anything
Nice mirror man all I see when I look in my rear view mirror is a bunch of vibration haha it's at times very difficult to determine what is behind me :shrug: seems like the popo knows this as they have gotten me twice blending in traffic behind me :bsflag:.
This doesn't seem to vibrate as much as my stock one did, maybe because of the foam in the 3M tape damping it or just my imagination
Xander
05-10-2014, 06:48 PM
http://i.imgur.com/PdfNfQR.jpg
Sent from my SAMSUNG-SM-G900A using Tapatalk
02civic629
05-15-2014, 01:54 PM
needs update on front splitter lol
Frostydc5
05-15-2014, 05:07 PM
I can see the edges of both my rear windows, if that tells you anything
This doesn't seem to vibrate as much as my stock one did, maybe because of the foam in the 3M tape damping it or just my imagination
that is somewhat like my wink mirror i can see out of both of my rear windows, but i am tired of it. i might try this out if its give me a comparable field of vision
Xander
05-15-2014, 07:32 PM
needs update on front splitter lol
No progress has been made lately on that
that is somewhat like my wink mirror i can see out of both of my rear windows, but i am tired of it. i might try this out if its give me a comparable field of vision
Is quite sexy
02civic629
05-16-2014, 09:26 AM
that is somewhat like my wink mirror i can see out of both of my rear windows, but i am tired of it. i might try this out if its give me a comparable field of vision
Y'all talking about mirror size and I don't even have the center mirror in the car........only side ones crew checking in LMAO
iThinkImJoey
05-16-2014, 09:32 AM
The wink mirror I have right now was Steve's years ago lol
iThinkImJoey
05-16-2014, 09:32 AM
Btw wish me luck on my last final
02civic629
05-16-2014, 09:34 AM
The wink mirror I have right now was Steve's years ago lol
Yea base god proven to add +5.8whp, shit you got the base god intake too and that thing adds +21.4whp :vtec:
Btw wish me luck on my last final
Damn you guys aren't finished yet?? We finished two weeks ago lol
But good luck bro :awwyeah:
Xander
05-16-2014, 09:52 AM
Y'all talking about mirror size and I don't even have the center mirror in the car........only side ones crew checking in LMAO
Because Racecar
Btw wish me luck on my last final
Good luck man, I took my last final Monday
Yea base god proven to add +5.8whp, shit you got the base god intake too and that thing adds +21.4whp :vtec:
Damn you guys aren't finished yet?? We finished two weeks ago lol
But good luck bro :awwyeah:
Hook me up with an intake :pray:
02civic629
05-16-2014, 10:30 AM
Because Racecar
Hook me up with an intake :pray:
Me racecar?? your the one with racecar sir lol lol
But hmmm intake for a splitter trade..... You ain't ready >> https://www.youtube.com/watch?v=HygdrL2L9uw
Xander
05-16-2014, 10:45 AM
Me racecar?? your the one with racecar sir lol lol
But hmmm intake for a splitter trade..... You ain't ready >> https://www.youtube.com/watch?v=HygdrL2L9uw
Are you talking about the splitter blade or brackets?
iThinkImJoey
05-16-2014, 12:08 PM
Btw wish me luck on my last final
Fail i thought this was the chat thread
Frostydc5
05-16-2014, 12:29 PM
Y'all talking about mirror size and I don't even have the center mirror in the car........only side ones crew checking in LMAO
i understand with a base there isnt much time to look back at the car you are beating since you are the one in the back i supposed #trololol
02civic629
05-16-2014, 01:10 PM
Are you talking about the splitter blade or brackets?
Both lol :tap:
Fail i thought this was the chat thread
I figured that lol :flush:
i understand with a base there isnt much time to look back at the car you are beating since you are the one in the back i supposed #trololol
Nah just took it down to record some driving with the go-pro, it cant see the out the front window so well with it there :coffee3:
Frostydc5
05-16-2014, 01:13 PM
Both lol :tap:
I figured that lol :flush:
Nah just took it down to record some driving with the go-pro, it cant see the out the front window so well with it there :coffee3:
im just giving you shit
02civic629
05-16-2014, 01:15 PM
im just giving you shit
#teamtroll I see Anthony added you back...... I was like LMAO lol
Frostydc5
05-16-2014, 02:17 PM
#teamtroll I see Anthony added you back...... I was like LMAO lol
lmao i was dying
Xander
05-16-2014, 02:42 PM
Both lol :tap:
I figured that lol :flush:
Nah just took it down to record some driving with the go-pro, it cant see the out the front window so well with it there :coffee3:
Uh that's like $350+ shipping though
Xander
05-16-2014, 10:53 PM
Another project I have happening alongside this
http://i.imgur.com/G2micT6.jpg
Sent from my SAMSUNG-SM-G900A using Tapatalk
Xander
05-20-2014, 11:08 AM
nice
Thanks man, it's a 1981 Honda CB650 Custom. I hope to have it done within a month. I got it last September for $350
http://i.imgur.com/lx27zbm.jpg
Xander
05-21-2014, 12:13 PM
Got a TrackTuff coil cover
http://i.imgur.com/TG8nvrL.jpg (http://imgur.com/TG8nvrL)
Sent from my SAMSUNG-SM-G900A using Tapatalk
Xander
05-22-2014, 11:37 PM
Working on getting my stance dialed in
http://i.imgur.com/dP7bSSx.jpg
Sent from my SAMSUNG-SM-G900A using Tapatalk
monjarassi
05-23-2014, 09:44 AM
hell yea, shes getting there no doubt
02civic629
05-25-2014, 10:08 AM
Needs a little more drop in the front and she's set
iThinkImJoey
05-26-2014, 12:29 PM
Needs a little more drop in the front and she's set
Don't tell him what to do boi
Xander
05-28-2014, 02:27 PM
hell yea, shes getting there no doubt
Thank you sir
Needs a little more drop in the front and she's set
Don't tell me what to do boi
Don't tell him what to do boi
I think I'm going to drop the front a tad more
monjarassi
05-28-2014, 09:35 PM
:coffee:
Xander
05-28-2014, 09:43 PM
:coffee:
Just a sneak peek
http://i.imgur.com/OmTTCiF.jpg
monjarassi
05-28-2014, 09:45 PM
o lawd!!!! noooooo
Xander
05-28-2014, 09:47 PM
o lawd!!!! noooooo
Hey, a man's gotta Rev and that just isn't going to be as successful with the k24 pump
monjarassi
05-28-2014, 09:50 PM
o yea thats the way to go bro
Xander
05-28-2014, 09:55 PM
o yea thats the way to go bro
Other stuff is coming my way as well, but that'll have to wait
02civic629
05-29-2014, 06:32 AM
Other stuff is coming my way as well, but that'll have to wait
oh snap :shady:
Get ready for vibrations :giggle:
Xander
05-29-2014, 10:52 AM
Get ready for vibrations :giggle:
What do you mean ?
The type-s oil pump especially with forged internals causes the motor to vibrate a good bit more. At least in comparison to a z3 block with a z3 oil pump. The type-s doesn't have balance shafts. But it's definitely a better pump for revving higher.
Xander
05-29-2014, 11:22 AM
The type-s oil pump especially with forged internals causes the motor to vibrate a good bit more. At least in comparison to a z3 block with a z3 oil pump. The type-s doesn't have balance shafts. But it's definitely a better pump for revving higher.
Ah alright. This specific oil pump is off of a z1 block
Ya that's a type-s pump, it's a nice pump, you'll probably just notice a good bit more vibrations.
Rmenjoi33
05-30-2014, 01:57 PM
throw solid mounts in there and say what vibrations lol
Xander
05-30-2014, 02:08 PM
throw solid mounts in there and say what vibrations lol
I daily on 85A's. I'm fairly used to vibrations
Ya it will probably vibrate more than what you have now. Forged internals and the type-s pump just make a lot of noise and vibrations. Not such a terrible thing...
he's use to heavy vibration items...
Xander
05-30-2014, 08:03 PM
he's use to heavy vibration items...
You know it Spaz ;)
iThinkImJoey
05-30-2014, 10:46 PM
he's use to heavy vibration items...
Xander's one of a kind
Xander
05-31-2014, 10:16 PM
Xander's one of a kind
That he is, young man
Xander
06-07-2014, 09:29 PM
Got some work done today, first off I unmasked my Transmission casing that I had painted
http://i.imgur.com/OgQOvuk.jpg?1
Then I cleaned up the other half for a bit of welding before painting that as well
http://i.imgur.com/VZkJtKg.jpg?1
Painted the water pump housing
http://i.imgur.com/bEX0wde.jpg?1
My rear bumper had been hanging at an angle so I pulled it off and replaced the beams under the taillights. These were what came off:
http://i.imgur.com/g4PKQyl.jpg?1
Much better now
http://i.imgur.com/N8fMafS.jpg?1
Then I got a sticker from Josh at Anointed Aero to go along with my splitter brackets!
http://i.imgur.com/Ln3r7pe.jpg?1
iThinkImJoey
06-08-2014, 12:04 PM
Awesome man
02civic629
06-08-2014, 01:29 PM
I think i might convert to 02-04 rear end....... It looks good
Xander
06-08-2014, 03:24 PM
I think i might convert to 02-04 rear end....... It looks good
I hope I can find someone to swap front ends with
02civic629
06-09-2014, 12:02 PM
I hope I can find someone to swap front ends with
Swap with Joey lol
BoostedK20
06-11-2014, 04:58 PM
Nice updates, and :welcome::to::boostedk20: I don't remember welcoming you!
Xander
06-11-2014, 04:59 PM
Nice updates, and :welcome::to::boostedk20: I don't remember welcoming you!
You may have a long time ago when I first joined, thank you sir
Xander
06-13-2014, 08:30 PM
Finally decided to snag a daily so I can focus on getting this thing where I want it:
http://i.imgur.com/rZuPQ2g.jpg
http://i.imgur.com/XeSxmoh.jpg
http://i.imgur.com/ACVBYx5.jpg
Sent from my SAMSUNG-SM-G900A using Tapatalk
Woah, that's a manual?! Would not expect that
02civic629
06-14-2014, 01:02 AM
Fresh pickup
Xander
06-14-2014, 06:57 AM
Woah, that's a manual?! Would not expect that
Definitely a selling point for me
Fresh pickup
Thanks boo <3
Sent from my SAMSUNG-SM-G900A using Tapatalk
wow a stick.. nice Daily!
Xander
06-14-2014, 04:14 PM
wow a stick.. nice Daily!
I think it may just do the trick haha
Xander
06-15-2014, 10:11 PM
http://i.imgur.com/ZrLbDze.jpg
Sent from my SAMSUNG-SM-G900A using Tapatalk
I miss my old BMW. Never driven an X3 or X5 but I bet they are super nice
Xander
06-18-2014, 07:00 AM
I miss my old BMW. Never driven an X3 or X5 but I bet they are super nice
Such little body roll, it handles like a car. Its a very pleasant daily
Xander
06-25-2014, 08:06 PM
For those of you who don't follow me on Instagram for some ridiculous reason:
http://i.imgur.com/OWuJMv9.jpg
Sent from my SAMSUNG-SM-G900A using Tapatalk
monjarassi
06-25-2014, 09:22 PM
for some reason
Xander
06-25-2014, 11:44 PM
for some reason
Will it's Xander_v1 if you want to
monjarassi
06-25-2014, 11:47 PM
Ahhh I see the splitter brackets mounted, ouch
Xander
06-25-2014, 11:50 PM
Ahhh I see the splitter brackets mounted, ouch
Why ouch?
monjarassi
06-26-2014, 12:29 AM
No reason
For those of you who don't follow me on Instagram for some ridiculous reason:
http://i.imgur.com/OWuJMv9.jpg
Sent from my SAMSUNG-SM-G900A using Tapatalk
Is that rust on the top of the bottom of the hood lol
Xander
06-30-2014, 11:39 AM
Is that rust on the top of the bottom of the hood lol
Yes it is. Salty New England winter problems. When I get all my body work done this year, that will be dealt with. Along with any rust spots, chips, dings, or what have you. It should look (Body-wise) as if it just rolled out of the showroom
Xander
07-09-2014, 05:29 PM
Got my battery relocated, and most of the charge harness complete this afternoon
http://i.imgur.com/wJVHWgb.jpg
Any particular reason you mounted it that way?
02civic629
07-11-2014, 09:35 AM
Any particular reason you mounted it that way?
Because if you ever meet this kid in person hes a upside down kinda person :rotfl: :rotfl:
Xander
07-11-2014, 10:03 AM
Any particular reason you mounted it that way?
Yeah I found it easier to mount with the bracket I had handy, and it keeps the terminals easier to access if need be
Because if you ever meet this kid in person hes a upside down kinda person :rotfl: :rotfl:
Speaking of, when am I seeing you again bro?
Xander
09-19-2014, 10:10 AM
Well I did some stuff last night
http://i.imgur.com/aw1fcDf.jpg
http://i.imgur.com/QbpdQiF.jpg
And I accidentally bought something yesterday too
http://i.imgur.com/o6KJT7N.jpg
http://i.imgur.com/1dyMymQ.jpg
02civic629
09-19-2014, 01:09 PM
Damnnnn in for more build pics!!!!!
Xander
09-19-2014, 01:10 PM
Damnnnn in for more build pics!!!!!
In for more build progress too
I always wanted to try that manifold... fucking sweet
Xander
09-20-2014, 08:40 AM
I always wanted to try that manifold... fucking sweet
I'm hoping it does the trick. I'm so torn between throwing some TSX pistons into the motor along with swapping the head or just keeping it stock block with an a2 head
02civic629
09-21-2014, 09:24 AM
I'm hoping it does the trick. I'm so torn between throwing some TSX pistons into the motor along with swapping the head or just keeping it stock block with an a2 head
I vote piston swap with the a2 head and a mild cam/spring setup
Xander
09-21-2014, 11:01 AM
I vote piston swap with the a2 head and a mild cam/spring setup
Get me a killer deal on pistons
02civic629
09-21-2014, 11:12 AM
Get me a killer deal on pistons
Im that slow base rsx kid, you know they don't sell nice parts to me so I have to fab everything myself :rotfl:
Xander
09-21-2014, 11:16 AM
Im that slow base rsx kid, you know they don't sell nice parts to me so I have to fab everything myself :rotfl:
Nobody sells me nice parts
02civic629
09-21-2014, 11:25 AM
Nobody sells me nice parts
#basecrewproblems.......
Xander
09-21-2014, 11:39 AM
#basecrewproblems.......
Gonna have to sell my spare parts :(
Sorry, but what manifold is that?
02civic629
09-21-2014, 12:15 PM
Sorry, but what manifold is that?
Dat rare a fuck RSP manifold........ :jelly:
Xander
09-21-2014, 12:50 PM
Sorry, but what manifold is that?
FN2-R RSP Manifold
Dat rare a fuck RSP manifold........ :jelly:
:jelly:
02civic629
09-21-2014, 01:01 PM
Need to get that baby manifold ported so she can really open up :giggle:
Xander
09-24-2014, 11:17 PM
Need to get that baby manifold ported so she can really open up :giggle:
Yeah nope. Too rich for my blood
monjarassi
09-25-2014, 08:23 AM
Good stuff keep em coming
Spoolin_VTEC
10-01-2014, 11:38 PM
Well I did some stuff last night
http://i.imgur.com/aw1fcDf.jpg
http://i.imgur.com/QbpdQiF.jpg
And I accidentally bought something yesterday too
http://i.imgur.com/o6KJT7N.jpg
http://i.imgur.com/1dyMymQ.jpg
Sick!! What does the bottom portion look like? What manifold is this? I've never seen it before. Looks interesting, could work or could be poor. :shrug:
Ninja edit: I see it's an FN2 RSP manifold. Why is it so rare and what's special about it?
I'm hoping it does the trick. I'm so torn between throwing some TSX pistons into the motor along with swapping the head or just keeping it stock block with an a2 head
What is the benefit of this? I haven't heard of this either. You should make a thread about this, so there can be a dedicated topic where people can chime in and learn. Would +rep you for sure
Xander
10-01-2014, 11:39 PM
Sick!! What does the bottom portion look like? What manifold is this? I've never seen it before. Looks interesting, could work or could be poor. :shrug:
Ninja edit: I see it's an FN2 RSP manifold. Why is it so rare and what's special about it?
What is the benefit of this? I haven't heard of this either. You should make a thread about this, so there can be a dedicated topic where people can chime in and learn. Would +rep you for sure
What's the benefit of swapping the pistons?
Spoolin_VTEC
10-02-2014, 12:18 AM
Well I did some stuff last night
http://i.imgur.com/aw1fcDf.jpg
http://i.imgur.com/QbpdQiF.jpg
And I accidentally bought something yesterday too
http://i.imgur.com/o6KJT7N.jpg
http://i.imgur.com/1dyMymQ.jpg
What's the benefit of swapping the pistons?
Sorry, yes
Xander
10-02-2014, 04:14 AM
Sorry, yes
K24a1 pistons have a lower compression ratio than k24a2 pistons so I'd be getting that
BoostedK20
10-06-2014, 11:23 PM
K24a1 pistons have a lower compression ratio than k24a2 pistons so I'd be getting that
How much of a different CR will it result in? Please make a thread about this, would be a great idea. I've never heard that before myself :thumb:
Xander
11-10-2014, 10:27 AM
I've been slacking here. ABS is getting relocated, car is getting repainted, brakes are getting powdercoated, new power steering high pressure line is getting made.
Si Speed 317
11-11-2014, 12:31 AM
Nice list! Where does ABS get relocated to? And what color paint and powdercoat?! New high pressure ps line, hmmm.. why a new one?
Sent from my SM-G900T using Tapatalk
Xander
11-15-2014, 08:04 PM
Nice list! Where does ABS get relocated to? And what color paint and powdercoat?! New high pressure ps line, hmmm.. why a new one?
Sent from my SM-G900T using Tapatalk
ABS is going underneath the windshield cowling where the Cruise Control was, Paint will remain Satin Silver Metallic, and the powdercoated wheels will be a nice shade of grey. The power steering line is just massive and unsightly from the factory so I'm making one that will route slightly differently around the engine bay and therefore remove that eyesore.
Xander
11-15-2014, 08:04 PM
Got some stuff in recently
http://i.imgur.com/GFgzcz6.jpg
Energy Suspension black master bushing kit
http://i.imgur.com/aFGCA7N.jpg
Hybrid Racing power steering line fitting for my custom line
http://i.imgur.com/wqYuaL2.jpg
Thats a comparison of my refreshed shifter mechanism with my old one
http://i.imgur.com/vhS6hM2.jpg
Purple marks show where I'll be cutting/shaving my RSP
http://i.imgur.com/EXHZec1.jpg
Mocked it up on a spare head
djtooon
11-18-2014, 01:41 PM
Looking good !!!
Xander
11-24-2014, 10:51 PM
Received a Bolt Boys Transmission Bolt kit today
http://i.imgur.com/JhqgkiI.jpg
and I got some Brembo seal kits in for some reason
Xander
12-11-2014, 11:45 PM
So I tore off the nasty rear brakes in preparation for what's happening next
http://i.imgur.com/n4d2HjQ.jpg
And then I started running the lines from the ABS unit to the preexisting Goodrich Stainless Lines
http://i.imgur.com/Id37lNU.jpg
http://i.imgur.com/1GGNYwN.jpg
And a quick shot of my battery bracket
http://i.imgur.com/jSJE0cI.jpg
And the Anointed Aero Splitter Brackets:
http://i.imgur.com/B5hNU9X.jpg
02civic629
12-14-2014, 07:03 PM
looking good bro
Xander
12-14-2014, 07:04 PM
looking good bro
Thanks boo
Xander
12-14-2014, 07:05 PM
Chopped my k20Z1 oil pump up for use on my k24
http://i.imgur.com/3fbHJrW.jpg
Xander
12-14-2014, 07:05 PM
I have no idea what I'm doing
http://i.imgur.com/vMwgg94.jpg
02civic629
12-14-2014, 07:06 PM
Dat hack job cut doe 0_o hahaha
Xander
12-14-2014, 07:06 PM
As long as it clears the girdle, :idgaf:
02civic629
12-14-2014, 07:09 PM
As long as it clears the girdle, :idgaf:
Yea at least your doing work on yours lol. I cant get mine to stay started, it will start the first time fine and run forever but throw a code, but when you go to start up again it will run for about 2 seconds and cut off everytime smh
Xander
12-14-2014, 07:10 PM
Yea at least your doing work on yours lol. I cant get mine to stay started, it will start the first time fine and run forever but throw a code, but when you go to start up again it will run for about 2 seconds and cut off everytime smh
Bad ground I promise
02civic629
12-14-2014, 07:21 PM
Bad ground I promise
Yea I looked over everything and checked grounds but without a code reader I was kinda stuck so ill be back this week sometime to figure it out. My roommate has my whole d-gauge setup and relocated AC in his car lol. He was like let me use it my car while you build your shit over the winter lol. I need to get that back from him hahaha.
Xander
12-14-2014, 07:22 PM
Yea I looked over everything and checked grounds but without a code reader I was kinda stuck so ill be back this week sometime to figure it out. My roommate has my whole d-gauge setup and relocated AC in his car lol. He was like let me use it my car while you build your shit over the winter lol. I need to get that back from him hahaha.
How do you like the D-Gauge
Xander
01-10-2015, 04:46 PM
Got a little carried away with taking the valve cover off
http://i.imgur.com/obCllJI.jpg
http://i.imgur.com/LLSBuFc.jpg
Si Speed 317
01-11-2015, 04:52 PM
You certainly did :rotfl: what are your plans now for winter?
Xander
01-11-2015, 04:55 PM
Got some parts and tools in today:
Firewall connector
http://i.imgur.com/8qNHScM.jpg
http://i.imgur.com/i3IBCfb.jpg
http://i.imgur.com/xF6FATp.jpg
New Door Seals
http://i.imgur.com/SdR1SG6.jpg
ryaano18
01-11-2015, 05:05 PM
Got some parts and tools in today:
Firewall connector
http://i.imgur.com/8qNHScM.jpg
http://i.imgur.com/i3IBCfb.jpg
http://i.imgur.com/xF6FATp.jpg
New Door Seals
http://i.imgur.com/SdR1SG6.jpg
Nice, looks like a 24-61? Do you already have the dmc tool to crimp the contacts?
Xander
01-11-2015, 05:06 PM
Yes 24-61 and I'm trying to find a crimper on eBay because I'm cheap
ryaano18
01-11-2015, 05:10 PM
Yes 24-61 and I'm trying to find a crimper on eBay because I'm cheap
lol no worries, i bought mine used as well. If you're in a pinch, you can use this one
http://www.amazon.com/d-sub-contact-indent-crimping-0-50mm%C2%B2~4-00mm%C2%B2/dp/B00LV38YK8/ref=sr_1_1?s=hi&ie=UTF8&qid=1421010514&sr=1-1&keywords=solid+contact+crimper
Not the same 8 indent dmc quality but it gets the job done. Let me know if you need help finding parts on boots and euro-raychem, ive been slowing stocking inventory
Xander
01-11-2015, 05:17 PM
I actually just ordered an Astro 615717 crimping tool for $75 off of eBay
Xander
01-11-2015, 05:22 PM
Buy I would like help finding the right size boot to run off of my firewall plug
ryaano18
01-11-2015, 05:45 PM
Buy I would like help finding the right size boot to run off of my firewall plug
depends on the angle of the wire coming off the cannon. if the wire runs straight then a 202K boot, if 90 degree then 222K
Technically, the 174 size is needed for the 24 shell size, but in my opinion, its way too big and looks like crap. So i recommend this
202K163-25-0 for straight wire routing
222k163-25-0 for 90 degree wire routing
Xander
01-11-2015, 05:53 PM
depends on the angle of the wire coming off the cannon. if the wire runs straight then a 202K boot, if 90 degree then 222K
Technically, the 174 size is needed for the 24 shell size, but in my opinion, its way too big and looks like crap. So i recommend this
202K163-25-0 for straight wire routing
222k163-25-0 for 90 degree wire routing
Thank you sir, I appreciate it
ryaano18
01-11-2015, 07:43 PM
Thank you sir, I appreciate it
No problem, and just in case if you didn't know, you also need the back shells for those connectors for the boots to work
Xander
01-11-2015, 07:52 PM
No problem, and just in case if you didn't know, you also need the back shells for those connectors for the boots to work
Shit
ryaano18
01-11-2015, 10:22 PM
Shit
You got this!
Xander
01-18-2015, 08:11 PM
So I was looking to get one of those T boots for the major split in the harness, is that something else you know the part number for?
ryaano18
01-18-2015, 11:23 PM
So I was looking to get one of those T boots for the major split in the harness, is that something else you know the part number for?
I know all the part numbers ;) lol They are 301A boots, the last 3 numbers depend on the size of the bundle(s) you are applying it over. I use a caliper to measure the bundle and then choose the proper boot. The last harness I made used a T boot for the first break out and it was a 301A028, but if you don't use concentric twisting then you may have to go with a 034 size.
I advise with keeping several boots handy of different sizes. It sucks when you dont have the right stuff on hand. PM for prices on boots if you would like to compare prices with your current supplier
so glad I'm done with all my wiring harness. That firewall plug will be nice
Xander
01-23-2015, 12:11 PM
so glad I'm done with all my wiring harness. That firewall plug will be nice
Yeah I'm like neck deep in it still, but I am looking forward to the results!
Xander
01-26-2015, 05:06 PM
Picked up some authentic Craft Square CF mirrors
http://i.imgur.com/0PLQT97.jpg
http://i.imgur.com/kjvgK6a.jpg
http://i.imgur.com/ZaKtcKV.jpg
02civic629
01-26-2015, 05:07 PM
Soooo sexy bruhhhhhh
Xander
01-26-2015, 05:18 PM
Thanks boo
Si Speed 317
01-28-2015, 02:02 AM
Mirrors look awesome! What's special about the craft square mirrors?
Sent from my SM-G900T using Tapatalk
Xander
01-28-2015, 10:02 AM
Mirrors look awesome! What's special about the craft square mirrors?
Sent from my SM-G900T using Tapatalk
Basically they are the original CF side mirrors; APR makes some that look identical (though they aren't even actual CF) as do some other companies, but Craft Square ones are the OG
I love my craft squares. I got the full set with bases.
But you already told me you're making your own. Great pickup
Xander
01-28-2015, 02:31 PM
I love my craft squares. I got the full set with bases.
But you already told me you're making your own. Great pickup
Thanks man, and yeah I've always loved the look of Craft Squares on the RSX so when I chanced upon these while looking for some seats I couldn't say no
Xander
02-13-2015, 07:59 PM
http://i.imgur.com/03arSpB.jpg
Big thanks to ryaano18
02civic629
02-14-2015, 10:09 AM
Oh snap......
Si Speed 317
02-14-2015, 08:21 PM
http://i.imgur.com/03arSpB.jpg
Big thanks to ryaano18
Coo! He's the wiring guru for a reason! What's the big diagram for?
Xander
02-14-2015, 08:27 PM
Coo! He's the wiring guru for a reason! What's the big diagram for?
I'm numbering the wires and putting them in the diagram so I know what goes where
ryaano18
02-14-2015, 10:52 PM
Coo! He's the wiring guru for a reason! What's the big diagram for?
Thanks for the kind words! Always help to have the layout diagram of the connector you're using since the numbering on the connector can get confusing and may end up putting it in the wrong hole..... no pun intended
I'm numbering the wires and putting them in the diagram so I know what goes where
hells yea! post more pics up when you get further along
Si Speed 317
02-15-2015, 11:29 AM
I'm numbering the wires and putting them in the diagram so I know what goes where
Thanks for the kind words! Always help to have the layout diagram of the connector you're using since the numbering on the connector can get confusing and may end up putting it in the wrong hole..... no pun intended
hells yea! post more pics up when you get further along
Ohhh ok makes sense. I learn new stuff every day! And definitely post more pics!
Xander
02-15-2015, 11:33 AM
Ohhh ok makes sense. I learn new stuff every day! And definitely post more pics!
I definitely will!
Xander
02-19-2015, 06:33 PM
Picked this up today from the guys at Autofair Honda!
http://i.imgur.com/QEDJHpZ.jpg
monjarassi
02-20-2015, 01:34 AM
Fawk yea
Xander
02-20-2015, 08:25 AM
And how could I resist? Even though it's about 20°F in my shop right now
http://i.imgur.com/HjxjwdB.jpg
Xander
02-23-2015, 05:04 PM
Suede Deep Corn 330MM
http://i.imgur.com/eVVq52H.jpg
Suede is so nice but can go sour so fast....
Xander
03-01-2015, 11:21 AM
Suede is so nice but can go sour so fast....
What do you mean?
Xander
03-05-2015, 07:41 PM
Needs some polishing, but my mounting plate is all milled!
http://i.imgur.com/4ToXTCE.jpg
Xander
04-03-2015, 11:36 PM
Here she was this afternoon:
http://i.imgur.com/LTPdv9A.jpg
BoostedK20
04-04-2015, 08:52 AM
Here she was this afternoon:
http://i.imgur.com/LTPdv9A.jpg
She's coming together nicely! What's your approximate/expected date of completion?
Needs some polishing, but my mounting plate is all milled!
http://i.imgur.com/4ToXTCE.jpg
NICE! Did you do the work yourself in your shop?
What do you mean?
I think Spaz is referring to the way suede wears. Even the best quality suede, after a long time of usage, wears in a way unique to suede. If you look at 8th gen Civic Si interior pics online, you'll see what I am referring to.
There is no need to worry, however. I have heard, not empirically, that you can maintain your suede and it will stay nicely fresh!
Keep us updated with pictures. That mounting plate really came out great! SUPER clean and professional with the allen-head bolts! I put the same ones on my Ruckus :upsidedownparty::spazface:
Xander
05-16-2015, 10:38 AM
Got a bunch of chassis parts back from my powdercoater
https://c1.staticflickr.com/9/8881/17699184385_d0aec1f71e_z.jpg (https://flic.kr/p/sY1WTt)Powdercoated Parts (https://flic.kr/p/sY1WTt) by Alex Gould (https://www.flickr.com/photos/133231265@N08/), on Flickr
https://c1.staticflickr.com/9/8820/17511644180_4f90658ed8_z.jpg (https://flic.kr/p/sFrKHE)Powdercoated Parts (https://flic.kr/p/sFrKHE) by Alex Gould (https://www.flickr.com/photos/133231265@N08/), on Flickr
Powered by vBulletin® Version 4.2.5 Copyright © 2024 vBulletin Solutions Inc. All rights reserved.