*CHAT* Nice weather, Club RSX bans, K-Swapped GTR, a Unicorn and will Rob's car ever be done chat

[Rmenjoi33]

kind of just called loza out a little bit on clubrsx.....in for ban hammer. lol

[iThinkImJoey]

kind of just called loza out a little bit on clubrsx.....in for ban hammer. lol

Surprised my thread didnt get closed yet. I made another acc but please dont rat me out lol
http://forums.clubrsx.com/showthread.php?t=1003770

[Rmenjoi33]

Surprised my thread didnt get closed yet. I made another acc but please dont rat me out lol
http://forums.clubrsx.com/showthread.php?t=1003770

bahahahaha, im dying.

[ryaano18]

kind of just called loza out a little bit on clubrsx.....in for ban hammer. lol

what did you say??

[iThinkImJoey]

Wiz Khalifas new mixtape is good

[Rmenjoi33]

what did you say??

http://forums.clubrsx.com/showthread.php?t=1006066

[ryaano18]

http://forums.clubrsx.com/showthread.php?t=1006066

You were actually very nice about it lol

[Rmenjoi33]

You were actually very nice about it lol

lol tried to be. I was only honest....He needs to move on.

[Bottled Morphine]

http://forums.clubrsx.com/showthread.php?t=1006066

Still looking to see where you called him out lol...you better not get banned for your opinion.

#belak crew member #1

[iThinkImJoey]

Yeah if you get banned for that, that would be so fucked up

[Rmenjoi33]

Just asked him why he still hangs around if he thinks the rsx is dead.

[iThinkImJoey]

Whats the best place to buy exhaust flanges? I need to make an adapter for my base race header to connect to a type s exhaust.

And no im not getting a type s rh right now.

Could i trust ebay on this one?

[aLmk]

What are your guys' thoughts on plugging tires? I have a screw in my front passenger tire very near the edge of the tire so it can't be patched. I bought a plug kit and planned on plugging it, but someone just mentioned that may not be a good idea. Basically I've gotten it's fine, and it's bad to do, from different people. Just curious what you guys think.

[iThinkImJoey]

What are your guys' thoughts on plugging tires? I have a screw in my front passenger tire very near the edge of the tire so it can't be patched. I bought a plug kit and planned on plugging it, but someone just mentioned that may not be a good idea. Basically I've gotten it's fine, and it's bad to do, from different people. Just curious what you guys think.

Is it on the sidewall? If its on the sidewall, plugging it or patching it would not be the best idea

[aLmk]

This is what it looks like:
http://i1134.photobucket.com/albums/m605/almk/2CEECBA3-0B49-4F4F-9DF0-38DDEF5BD2BF_zpspegikk0l.jpg (http://s1134.photobucket.com/user/almk/media/2CEECBA3-0B49-4F4F-9DF0-38DDEF5BD2BF_zpspegikk0l.jpg.html)
http://i1134.photobucket.com/albums/m605/almk/61452623-CF95-49EB-B24B-87A96380E4EB_zpshdlxcxig.jpg (http://s1134.photobucket.com/user/almk/media/61452623-CF95-49EB-B24B-87A96380E4EB_zpshdlxcxig.jpg.html)

[aLmk]

Turns out the screw was really small and didn't fully puncture the tire. I think it'll be fine:
http://i1134.photobucket.com/albums/m605/almk/FF0121B5-E5F3-4F55-9195-D2C36609F9A9_zpsjilcejfg.jpg (http://s1134.photobucket.com/user/almk/media/FF0121B5-E5F3-4F55-9195-D2C36609F9A9_zpsjilcejfg.jpg.html)

[PetefromtheStreets]

Turns out the screw was really small and didn't fully puncture the tire. I think it'll be fine:
http://i1134.photobucket.com/albums/m605/almk/FF0121B5-E5F3-4F55-9195-D2C36609F9A9_zpsjilcejfg.jpg (http://s1134.photobucket.com/user/almk/media/FF0121B5-E5F3-4F55-9195-D2C36609F9A9_zpsjilcejfg.jpg.html)

If anything have it patched.

Sent from my SAMSUNG-SM-G900A using Tapatalk

[PetefromtheStreets]

http://img.tapatalk.com/d/14/05/28/ynuzy5a2.jpg
http://img.tapatalk.com/d/14/05/28/5uvyje9e.jpg
http://img.tapatalk.com/d/14/05/28/ype9ypy9.jpg

#doyouevenshiftbro

Sent from my SAMSUNG-SM-G900A using Tapatalk

[02civic629]

So jelly

But I guess I don't shift....... I haven't broken any boxes :(

[02civic629]

Heading to the dyno today, shooting for 250whp :awwyeah:

[PetefromtheStreets]

Heading to the dyno today, shooting for 250whp :awwyeah:

Post vids. I'd like to see.


So jelly

But I guess I don't shift....... I haven't broken any boxes :(

Don't be jelly. Be glad you don't break things like I do. :thumb:

Sent from my SAMSUNG-SM-G900A using Tapatalk

[02civic629]

Post vids. I'd like to see.

Don't be jelly. Be glad you don't break things like I do. :thumb:

Sent from my SAMSUNG-SM-G900A using Tapatalk

3 Gopros, Nikon, and S4 will be there...... Video will be taken from many angles lol

[PetefromtheStreets]

3 Gopros, Nikon, and S4 will be there...... Video will be taken from many angles lol

Lmaooo your missing an s5

Sent from my SAMSUNG-SM-G900A using Tapatalk

[02civic629]

Lmaooo your missing an s5

Sent from my SAMSUNG-SM-G900A using Tapatalk

:rotfl: Hey man I'm poor and broke lol...... I got the S4 right before the S5 dropped cause people where selling them dirt cheap cause they wanted the new one. Me I could care less, phones an phone IMO, as long as you can talk, text, take decent pics/video, and surf the web who cares what else it does.

[monjarassi]

:coffee:

[PetefromtheStreets]

:rotfl: Hey man I'm poor and broke lol...... I got the S4 right before the S5 dropped cause people where selling them dirt cheap cause they wanted the new one. Me I could care less, phones an phone IMO, as long as you can talk, text, take decent pics/video, and surf the web who cares what else it does.

S5 takes better pictures. That's my main camera so its as good as it gets for me lol


:coffee:

Morning sir monjarassi

Sent from my SAMSUNG-SM-G900A using Tapatalk

[Bottled Morphine]

S5 takes better pictures. That's my main camera so its as good as it gets for me lol



Morning sir monjarassi

Sent from my SAMSUNG-SM-G900A using Tapatalk

Gimme the go pro

#belak crew member #1

[PetefromtheStreets]

Gimme the go pro

#belak crew member #1

Buy a new suctioning mount

Sent from my SAMSUNG-SM-G900A using Tapatalk

[Bottled Morphine]

Buy a new suctioning mount

Sent from my SAMSUNG-SM-G900A using Tapatalk

Sure idc

#belak crew member #1

[02civic629]

S5 takes better pictures. That's my main camera so its as good as it gets for me lol

Sent from my SAMSUNG-SM-G900A using Tapatalk

Oh yea the S5 is like 10x better than the S4 in alot of ways lol...... But when you have a Nikon and gopro your not missing out on much :beer:

[PetefromtheStreets]

Oh yea the S5 is like 10x better than the S4 in alot of ways lol...... But when you have a Nikon and gopro your not missing out on much :beer:

Ill give you that. Lol. But it has my heart now

Sent from my SAMSUNG-SM-G900A using Tapatalk

[PetefromtheStreets]

Btw who's tuning you?

Sent from my SAMSUNG-SM-G900A using Tapatalk

[02civic629]

Buy a new suctioning mount

Sent from my SAMSUNG-SM-G900A using Tapatalk

Yea i only have one suction mount :( I need to buy another one and I'd be set but them shits are expensive and I'm not buying some off-brand mount to have it fly off. I've tested the mount to 150+mph and it held so I'm happy with my gopro brand mount :rotfl:

[Bottled Morphine]

Yea i only have one suction mount :( I need to buy another one and I'd be set but them shits are expensive and I'm not buying some off-brand mount to have it fly off. I've tested the mount to 150+mph and it held so I'm happy with my gopro brand mount :rotfl:

Thought they were only like $40?

#belak crew member #1

[PetefromtheStreets]

Yea i only have one suction mount :( I need to buy another one and I'd be set but them shits are expensive and I'm not buying some off-brand mount to have it fly off. I've tested the mount to 150+mph and it held so I'm happy with my gopro brand mount :rotfl:

Expensive? Says the man with 2 GoPro

Sent from my SAMSUNG-SM-G900A using Tapatalk

[Bottled Morphine]

Expensive? Says the man with 2 GoPro

Sent from my SAMSUNG-SM-G900A using Tapatalk

And a Nikon, and is about to get dyno'd...money bags

#belak crew member #1

[PetefromtheStreets]

And a Nikon, and is about to get dyno'd...money bags

#belak crew member #1

AND he has ppgs

Sent from my SAMSUNG-SM-G900A using Tapatalk

[Bottled Morphine]

AND he has ppgs

Sent from my SAMSUNG-SM-G900A using Tapatalk

:cool:

#belak crew member #1

[02civic629]

Ill give you that. Lol. But it has my heart now

Sent from my SAMSUNG-SM-G900A using Tapatalk

True I was like the the S5 isn't gonna be all that much better, but then when it came out I was like damnit, shoulda waited :angryfire:


Btw who's tuning you?

Sent from my SAMSUNG-SM-G900A using Tapatalk

That one guy you see on the forums and youtube with that all motor base rsx. I think people call him "base god" or something, dudes a true jerk :rotfl: :rotfl:

Rented an hour so ill see what I can do in that time.

[02civic629]

Thought they were only like $40?

#belak crew member #1

Yea there actually like $50, and thats too much money for me, im broke :rotfl:


Expensive? Says the man with 2 GoPro

Sent from my SAMSUNG-SM-G900A using Tapatalk

Gift and gift......


And a Nikon, and is about to get dyno'd...money bags

#belak crew member #1

Nikon was a gift...... dyno time basically free...... not rich at all :(


AND he has ppgs

Sent from my SAMSUNG-SM-G900A using Tapatalk

Gift again...... :rotfl:

[PetefromtheStreets]

Yea there actually like $50, and thats too much money for me, im broke :rotfl:



Gift and gift......



Nikon was a gift...... dyno time basically free...... not rich at all :(



Gift again...... :rotfl:

Who tf gifts you a ppg gear set?

Sent from my SAMSUNG-SM-G900A using Tapatalk

[Bottled Morphine]

Who tf gifts you a ppg gear set?

Sent from my SAMSUNG-SM-G900A using Tapatalk

I was gonna ask but it seemed complicated so I left it alone lol

#belak crew member #1

[PetefromtheStreets]

250 out of that a3 would be killer

Sent from my SAMSUNG-SM-G900A using Tapatalk

[PetefromtheStreets]

And I like seeing people tune their own cars. Ive been tuning mine for a while now

Sent from my SAMSUNG-SM-G900A using Tapatalk

[02civic629]

I was gonna ask but it seemed complicated so I left it alone lol

#belak crew member #1

Yea its a complicated story I'm not talking about, lets just say me and basedgirlracing ran into some sponsorship issues and disagreements after this PPG purchase :2c:

[02civic629]

250 out of that a3 would be killer

Sent from my SAMSUNG-SM-G900A using Tapatalk

I was kidding, im sure I wont see no damn 250whp unless the dyno is broken :rotfl:


And I like seeing people tune their own cars. Ive been tuning mine for a while now

Sent from my SAMSUNG-SM-G900A using Tapatalk

I've been tuning mine for almost 2+ years little by little. Yea I coulda dropped it off and had it fully done in 4 hours but whats the fun in that ya know. Plus is it nice being able to change parts 24/7 and not worry about shit being off or anything :thumb:

[PetefromtheStreets]

Gotcha. One day you'll spill the beans Anyways. Besides I've never heard of basedgirlracing

Sent from my SAMSUNG-SM-G900A using Tapatalk

[PetefromtheStreets]

I was kidding, im sure I wont see no damn 250whp unless the dyno is broken :rotfl:



I've been tuning mine for almost 2+ years little by little. Yea I coulda dropped it off and had it fully done in 4 hours but whats the fun in that ya know. Plus is it nice being able to change parts 24/7 and not worry about shit being off or anything :thumb:

Oh I was like Damn 250 is Damn good. Lol

And I've tuned mine for the better part of 4 years now. And exactly. If I don't like something I don't have yup email back and forth till its resolved

Sent from my SAMSUNG-SM-G900A using Tapatalk

[02civic629]

Yea next I really wanna get my hands on one of those magnus intake manifolds so I can see if there's a difference in power...... but those are mega money :(

[PetefromtheStreets]

Yea next I really wanna get my hands on one of those magnus intake manifolds so I can see if there's a difference in power...... but those are mega money :(

My boy just sold one. Smh

Sent from my SAMSUNG-SM-G900A using Tapatalk

[Xander]

Big things are in the works

Sent from my SAMSUNG-SM-G900A using Tapatalk

[Rmenjoi33]

dc5p is at it again. He is doing a port a polish on his head by hand using a dremel.

[PetefromtheStreets]

dc5p is at it again. He is doing a port a polish on his head by hand using a dremel.

That's how mine is. And the shop next door use all hand ported heads

Sent from my SAMSUNG-SM-G900A using Tapatalk

[Rmenjoi33]

That's how mine is. And the shop next door use all hand ported heads

Sent from my SAMSUNG-SM-G900A using Tapatalk

weird. Wouldnt trust myself.

[PetefromtheStreets]

weird. Wouldnt trust myself.

I didn't do mine myself tho. Had the machine shop do it. You don't have to go big to make big power. He'll find out the hard way I'd he has no knowledge of it. It's all about flow mane. Making the air move with least amount of turbulence as possible.

Sent from my SAMSUNG-SM-G900A using Tapatalk

[aLmk]

If anything have it patched.

Sent from my SAMSUNG-SM-G900A using Tapatalk
Took it to a few places before I even pulled the screw out, and they all said they couldn't patch it because it's too close to the side wall. The tire isn't punctured at all nor is it leaking air, so I'm just gonna go with it :shrug:

[Rmenjoi33]

I didn't do mine myself tho. Had the machine shop do it. You don't have to go big to make big power. He'll find out the hard way I'd he has no knowledge of it. It's all about flow mane. Making the air move with least amount of turbulence as possible.

Sent from my SAMSUNG-SM-G900A using Tapatalk

yeah he has no clue. He bought a centerfed and said he could keep his radiator and a/c

[monjarassi]

So fellas im sad to report the ep3 is down again:angryfire:

[PetefromtheStreets]

So fellas im sad to report the ep3 is down again:angryfire:

Why is that? What happened?

Sent from my SAMSUNG-SM-G900A using Tapatalk

[monjarassi]

you wont believe

[Xander]

you wont believe

Tell me

[PetefromtheStreets]

you wont believe

You didn't grenade a motor did you?

Sent from my SAMSUNG-SM-G900A using Tapatalk

[monjarassi]

No hell no!!!

The fkn clutch slipped at 12lbs of boost!!!!!!!!

We were working on the high cam pulls and was on my last 3 and bam, slipped at 7krpm

[PetefromtheStreets]

No hell no!!!

The fkn clutch slipped at 12lbs of boost!!!!!!!!

We were working on the high cam pulls and was on my last 3 and bam, slipped at 7krpm

DAAAAAAAMMIT! That's why I run the twin disc. You upgrading to that next?

sent from my bomb ass Galaxy s5

[monjarassi]

yes sirre, already on the way to me!!

hahahahahaha

[monjarassi]

quick question doh, do u have a clutch stop on it??

[PetefromtheStreets]

yes sirre, already on the way to me!!

hahahahahaha

Martin you are just too much of a boss, brother. I can't keep up with you. Lol. Glad you got one on the way man.


quick question doh, do u have a clutch stop on it??

Nope. Sure don't. Have had zero issues. I also run a tilton clutch cmc. But had no issues on an oem cmc either


sent from my bomb ass Galaxy s5

[monjarassi]

What can I say I need parts brah, I ain't hungry

[02civic629]

No hell no!!!

The fkn clutch slipped at 12lbs of boost!!!!!!!!

We were working on the high cam pulls and was on my last 3 and bam, slipped at 7krpm

What clutch you have that slipped on you??

[Bottled Morphine]

yeah he has no clue. He bought a centerfed and said he could keep his radiator and a/c

Yeah he was dm'ing asking me about my whole setup...talking about how everything should fit with his stock radiator, ac and power steering...told him why not just buy a side feed and but have to even worry about majority of this...his response wasssss..." I would but I already bought a centerfeed though". Do your research kid...

#belak crew member #1

[monjarassi]

What clutch you have that slipped on you??

Competition clutch super single

[Bottled Morphine]

Competition clutch super single

Live and learn!

#belak crew member #1

[Rmenjoi33]

Yeah he was dm'ing asking me about my whole setup...talking about how everything should fit with his stock radiator, ac and power steering...told him why not just buy a side feed and but have to even worry about majority of this...his response wasssss..." I would but I already bought a centerfeed though". Do your research kid...

#belak crew member #1

Lol im in for the aftermarket cooling to the block.

[Rmenjoi33]

Competition clutch super single

and not going with this clutch.

[Bottled Morphine]

Lol im in for the aftermarket cooling to the block.

Ugh yeah...looks like that's where it's headed...tired of him "polishing" stuff too...just leave it alone lol...took his cylinder head off just to "polish" it.

#belak crew member #1

[Rmenjoi33]

Ugh yeah...looks like that's where it's headed...tired of him "polishing" stuff too...just leave it alone lol...took his cylinder head off just to "polish" it.

#belak crew member #1

lol agreed. He "polished" his tranny. Which was just him taking a wire brush to it.

[Bottled Morphine]

lol agreed. He "polished" his tranny. Which was just him taking a wire brush to it.

Yeah I saw you commented on that lol...you were right though...all he had to do was hit it with some aluminum colored vht or something of the sort.

#belak crew member #1

[Rmenjoi33]

Yeah I saw you commented on that lol...you were right though...all he had to do was hit it with some aluminum colored vht or something of the sort.

#belak crew member #1

Oh well no talking him out of shit. He is gunna make 300hp.......when for the money he just spent on cams and a IM he could have bought a used full race kit. That and the motor he is building could have 500+. What a fail at life. Maybe this time he wont over rev his motor and blame it on the tune.

[monjarassi]

yes lesson learned at a steep price,

But aint worried bout nun, twin disk on the way

[Bottled Morphine]

Damn...e63 amg bi turbo v8...I'm in love. Paper tags newly bought...

#belak crew member #1

[Rmenjoi33]

yes lesson learned at a steep price,

But aint worried bout nun, twin disk on the way

so I should prob just skip the cc stage 5/ super single and go straight to the twin disk? Hmmmm. Or I could just do this trade that is all my turbo parts for a supercharger aftercooler setup.

[Bottled Morphine]

so I should prob just skip the cc stage 5/ super single and go straight to the twin disk? Hmmmm. Or I could just do this trade that is all my turbo parts for a supercharger aftercooler setup.

S/c sounds good for a daily driven setup. What's your goals though?

#belak crew member #1

[Bottled Morphine]

And honestly I'd go twin if you're looking for substantial power...pop it in and not have to worry about having to drop the trans again for clutch issues for a while.

#belak crew member #1

[Turpid Porpoise]

so I should prob just skip the cc stage 5/ super single and go straight to the twin disk? Hmmmm. Or I could just do this trade that is all my turbo parts for a supercharger aftercooler setup.

I have been considering this for so long. I think a rotrex or twin screw setup would be a nasty track set up

[Rmenjoi33]

S/c sounds good for a daily driven setup. What's your goals though?

#belak crew member #1

With the turbo or what?

[Rmenjoi33]

I have been considering this for so long. I think a rotrex or twin screw setup would be a nasty track set up

I was thinking if I do this I could have 300+ and then later on upgrade the blower. I could also just keep the turbo and build the motor this winter like planned and make 500+. Im getting impatient I think and am still waiting for the move to my other job to happen. Until then money is tight and progress will be balls slow.

[aLmk]

No hell no!!!

The fkn clutch slipped at 12lbs of boost!!!!!!!!

We were working on the high cam pulls and was on my last 3 and bam, slipped at 7krpm
That's a damn shame!

[Turpid Porpoise]

I was thinking if I do this I could have 300+ and then later on upgrade the blower. I could also just keep the turbo and build the motor this winter like planned and make 500+. Im getting impatient I think and am still waiting for the move to my other job to happen. Until then money is tight and progress will be balls slow.

Thats why I keep putting my turbo kit up for sale. If I could the sell the kit I could get the car painted and get a header to atleast get the car running before I decided which power adder I would like to slap on there.

[Rmenjoi33]

lol guy on clubrsx is giving out painting advice because he used to detail cars for a living....fail.

[PetefromtheStreets]

lol guy on clubrsx is giving out painting advice because he used to detail cars for a living....fail.

I wash mine once a month. I can paint too?

sent from my bomb ass Galaxy s5

[Rmenjoi33]

I wash mine once a month. I can paint too?

sent from my bomb ass Galaxy s5

sure man, come over ill let you just go at it.

[Bottled Morphine]

I wash mine once a month. I can paint too?

sent from my bomb ass Galaxy s5

Paint mine

#belak crew member #1

[PetefromtheStreets]

sure man, come over ill let you just go at it.


Paint mine

#belak crew member #1

I charge 100/hour because of my expertise

sent from my bomb ass Galaxy s5

[Rmenjoi33]

Paint mine

#belak crew member #1

lol this should be fun, lets go!

[monjarassi]

I would say so depending on the suggested power

[monjarassi]

Ima send mine in for inspection and resell it, just not recommended for anyone seeking 500+ hp

[Bottled Morphine]

lol this should be fun, lets go!

Imma get dc5p to polish and paint st00fz

#belak crew member #1

[Rmenjoi33]

Imma get dc5p to polish and paint st00fz

#belak crew member #1

lool stooop I cant anymore with him.

[Frostydc5]

havent been on here in a while... but been making mula haha


Damn...e63 amg bi turbo v8...I'm in love. Paper tags newly bought...

#belak crew member #1
lol worked on a e63 and a s63 today lol. bad bitches let me tell you haha

[Bottled Morphine]

havent been on here in a while... but been making mula haha


lol worked on a e63 and a s63 today lol. bad bitches let me tell you haha

Annoying to work on?

#belak crew member #1

[Frostydc5]

Annoying to work on?

#belak crew member #1

thats an understatement lol well to a point some stuff on them isnt bad others i dont ever want to touch. the electrical shit is a pain no matter what.

[PetefromtheStreets]

thats an understatement lol well to a point some stuff on them isnt bad others i dont ever want to touch. the electrical shit is a pain no matter what.

Btw. How you liking the job?

sent from my bomb ass Galaxy s5
#doyouevenshiftbro

[Frostydc5]

Btw. How you liking the job?

sent from my bomb ass Galaxy s5
#doyouevenshiftbro

well its not entirely a new job since i worked there for 2 years before i joined the corps, but its like i never left so glad to be back and i wish i never had left.

[PetefromtheStreets]

well its not entirely a new job since i worked there for 2 years before i joined the corps, but its like i never left so glad to be back and i wish i never had left.

That's why I didn't say new job. Lol. But good man glad to hear its working for you. I'm actually seeking higher employment

sent from my bomb ass Galaxy s5
#doyouevenshiftbro

[iThinkImJoey]

A couple of questions. Are all 3bolt exhaust flanges the same size besides the varying inner diameter? And where could I get them?
I'm going to have my uncle make me an adapter for my exhaust to fit my RH.

[Xander]

A couple of questions. Are all 3bolt exhaust flanges the same size besides the varying inner diameter? And where could I get them?
I'm going to have my uncle make me an adapter for my exhaust to fit my RH.

For the most part yes, gaskets not so much

[iThinkImJoey]

For the most part yes, gaskets not so much

What's the difference with the gaskets?

[Xander]

What's the difference with the gaskets?

Well see, for me it's tough to find a readily available 2 bolt 3 inch gasket so I found one off of a GM diesel truck that does the trick. I do need to drill new holes though

[Rmenjoi33]

Im gunna be doing something simular tomorrow. Im tired of the car being so quiet so im putting the race header and 3 inch exhaust back on. The only problem is the 3 inch is v banded so im making an adapter out of the custom r/d parts Adrian provided.

http://i1264.photobucket.com/albums/jj490/rmenjoi33/null_zps253d8039.jpg

[iThinkImJoey]

Motherfucker. I think my inner tie rod is messed up. Car jacked up and there's play on the wheel

[Xander]

Motherfucker. I think my inner tie rod is messed up. Car jacked up and there's play on the wheel

Racecar problems

[PetefromtheStreets]

Motherfucker. I think my inner tie rod is messed up. Car jacked up and there's play on the wheel

Ive got a spare set. Used but to my knowledge they were still good.

sent from my bomb ass Galaxy s5
#doyouevenshiftbro

[iThinkImJoey]

Ive got a spare set. Used but to my knowledge they were still good.

sent from my bomb ass Galaxy s5
#doyouevenshiftbro

Ill let you know. Thanks

[iThinkImJoey]

lol FML

Good news: I removed the wheel from the car and saw the fucking alignment guy forgot to tighten the strut bolts which was causing the wheel to have the play so i tightened it and its good now.

Bad news: I was test driving it and i was happy so i started to drive fast. Shifting from 2nd to 3rd gear above 4k rpms gets me a slight grind which led me to another problem to fix lolol

[Si Speed 317]

Thankfully you fixed that, definitely could've been bad. On the tranny note, hope you're well versed in swapping synchros!

[Bottled Morphine]

Intercooler and piping done. -10 fuel setup next, wiring and oil fittings. Catch can after an reservoir can which are essentially just simply boxes so she's close to awakening!

#belak crew member #1

[Frostydc5]

Intercooler and piping done. -10 fuel setup next, wiring and oil fittings. Catch can after an reservoir can which are essentially just simply boxes so she's close to awakening!

#belak crew member #1

bout damn time!!

[Bottled Morphine]

bout damn time!!

Yeah...time to wrap this bitch up.

#belak crew member #1

[ryaano18]

Intercooler and piping done. -10 fuel setup next, wiring and oil fittings. Catch can after an reservoir can which are essentially just simply boxes so she's close to awakening!

#belak crew member #1

sweeeeeeetttttt

[ryaano18]

bout damn time!!

dude!!! your car is on ktuned's banner?? awesome!!!!

[Frostydc5]

dude!!! your car is on ktuned's banner?? awesome!!!!

Yeah man, i didnt know they were doing it! was deff a good for me lol

[ryaano18]

Yeah man, i didnt know they were doing it! was deff a good for me lol

hell yea! well deserved! I hope they have been offering you discounts on their parts for you lol

[Bottled Morphine]

hell yea! well deserved! I hope they have been offering you discounts on their parts for you lol

They better...for using your car and ish

#belak crew member #1

[ryaano18]

They better...for using your car and ish

#belak crew member #1

right! Adrian needs royalty fees

[Frostydc5]

hell yea! well deserved! I hope they have been offering you discounts on their parts for you lol

i get some hook ups on little stuff so i cant complain. wish i could get sponsored by them tho

[Bottled Morphine]

i get some hook ups on little stuff so i cant complain. wish i could get sponsored by them tho

Carsponsors.com

#belak crew member #1

[Frostydc5]

Carsponsors.com

#belak crew member #1

hell yeah they are the shit lmao

[Bottled Morphine]

Fuck this...05-06 aspec conversion incoming.

#belak crew member #1

[Frostydc5]

do eeet

[Bottled Morphine]

do eeet

Donate

#belak crew member #1

[Frostydc5]

i no has money to be donating. i need to be donated to lol

[Bottled Morphine]

That VIS Aspec lip fit decent?

#belak crew member #1

[Bottled Morphine]

i no has money to be donating. i need to be donated to lol

Yeah ok ktuned

#fastest of the hypothetical/ prospective car crew member #1

[Frostydc5]

Yeah ok ktuned

#fastest of the hypothetical/ prospective car crew member #1

you are the one with the monster build

[Bottled Morphine]

you are the one with the monster build

Speaking of which...I'm thinking of buying a helical set. That Gear X 1-4 set. Couple ppl with 800+ have been using em for a while and no issues...1.8k...not terrible.

#fastest of the hypothetical/ prospective car crew member #1

[Frostydc5]

Speaking of which...I'm thinking of buying a helical set. That Gear X 1-4 set. Couple ppl with 800+ have been using em for a while and no issues...1.8k...not terrible.

#fastest of the hypothetical/ prospective car crew member #1

thats not bad at all

[Turpid Porpoise]

Got motivated for some reason today and pulled the motor and trans back out, installed the LSD, installed my CC clutch and flywheel, installed my fluidampr and started prepping the engine bay for paint.

[aLmk]

Got motivated for some reason today and pulled the motor and trans back out, installed the LSD, installed my CC clutch and flywheel, installed my fluidampr and started prepping the engine bay for paint.
That's awesome! Did you re-shim the trans?

[Xander]

I finally got my spare transmission looked at. Needs a new third gear synchro set, but otherwise it's fine. Not bad for $200

Sent from my SAMSUNG-SM-G900A using Tapatalk

[Turpid Porpoise]

That's awesome! Did you re-shim the trans?

Not yet. I still need to check the clearance and order the shims. The trans is still sitting open. I'm debating on getting the tsx 6th gear

Sent from my SCH-I545 using Tapatalk

[Frostydc5]

Not yet. I still need to check the clearance and order the shims. The trans is still sitting open. I'm debating on getting the tsx 6th gear

Sent from my SCH-I545 using Tapatalk
do it! it is so worth it

[aLmk]

Not yet. I still need to check the clearance and order the shims. The trans is still sitting open. I'm debating on getting the tsx 6th gear

Sent from my SCH-I545 using Tapatalk
If you made a write up for doing that, that would be great. That's one thing in like afraid I'd do wrong, but I guess most of it isn't any different than like setting valve lash.

[Bottled Morphine]

http://img.tapatalk.com/d/14/06/01/gabuge5e.jpg

I'm not sure if All In/ Speedfactory Derek is gonna start "mass producing" these "custom" manifolds...but that looks like a clear copy and paste to me.

#fastest of the hypothetical/ prospective car crew member #1

[Xander]

Not yet. I still need to check the clearance and order the shims. The trans is still sitting open. I'm debating on getting the tsx 6th gear

Sent from my SCH-I545 using Tapatalk

I could hook you up on it if you want

[Turpid Porpoise]

I could hook you up on it if you want

With the shims?

Sent from my SCH-I545 using Tapatalk

[Turpid Porpoise]

If you made a write up for doing that, that would be great. That's one thing in like afraid I'd do wrong, but I guess most of it isn't any different than like setting valve lash.

Since I have the transmission apart I could probably do one for disassembly, lsd install, tsx 6th and reassembly

Sent from my SCH-I545 using Tapatalk

[Xander]

With the shims?

Sent from my SCH-I545 using Tapatalk

I was talking about the TSX sixth specifically, but I'm sure I could help with the shims too

[aLmk]

Since I have the transmission apart I could probably do one for disassembly, lsd install, tsx 6th and reassembly

Sent from my SCH-I545 using Tapatalk
It's just the shimming that gets me... I've had my whole trans apart and swapped gears into it, but always kept the same LSD and main shaft so I never had to re-shim

[Turpid Porpoise]

It's just the shimming that gets me... I've had my whole trans apart and swapped gears into it, but always kept the same LSD and main shaft so I never had to re-shim

The LSD shim is simpler than the mainshaft shim which I have to replace this time.

[aLmk]

Don't you need a dial indicator for one of the shim measurements?

[Xander]

The LSD shim is simpler than the mainshaft shim which I have to replace this time.

Let me know which one you need and I may be able to help you out with that. Differential shims are much easier to get a hold of, but let me know what you figure out and I'll see what I can do

[PetefromtheStreets]

Raced the c4 Vette again last night.

https://www.dropbox.com/s/m8roxdsu93yr0q6/Vette%20round%202.mp4

sent from my bomb ass Galaxy s5
#doyouevenshiftbro

[Rmenjoi33]

Raced the c4 Vette again last night.

https://www.dropbox.com/s/m8roxdsu93yr0q6/Vette%20round%202.mp4

sent from my bomb ass Galaxy s5
#doyouevenshiftbro

you need a gopro

[PetefromtheStreets]

you need a gopro

Have one. Need a new mount. Lol

sent from my bomb ass Galaxy s5
#doyouevenshiftbro

[Rmenjoi33]

Have one. Need a new mount. Lol

sent from my bomb ass Galaxy s5
#doyouevenshiftbro

Get on it bro, im sure you could raise taxes for one....

[PetefromtheStreets]

Get on it bro, im sure you could raise taxes for one....

Congress wouldn't pass the bill

sent from my bomb ass Galaxy s5
#doyouevenshiftbro

[aLmk]

Nice pass, car sounds like a jet while it's going by

[PetefromtheStreets]

Nice pass, car sounds like a jet while it's going by

Lol thanks. I thought it sounded pretty cool

sent from my bomb ass Galaxy s5
#doyouevenshiftbro

[Turpid Porpoise]

Let me know which one you need and I may be able to help you out with that. Differential shims are much easier to get a hold of, but let me know what you figure out and I'll see what I can do

Will do, thanks man.

[Rmenjoi33]

blah, what I frustrating day.

[ryaano18]

blah, what I frustrating day.

bitchy customers?

[ryaano18]

http://img.tapatalk.com/d/14/06/01/gabuge5e.jpg

I'm not sure if All In/ Speedfactory Derek is gonna start "mass producing" these "custom" manifolds...but that looks like a clear copy and paste to me.

#fastest of the hypothetical/ prospective car crew member #1

I liked his other manifold better, the triangly one

[Rmenjoi33]

bitchy customers?

I dont deal with customers directly and im only painting at night. Right now im at my full time job, but its the personal stuff thats frustrating me.

[monjarassi]

:coffee:

[02civic629]

Nice pass, car sounds like a jet while it's going by

This.......

[iThinkImJoey]

lol I don't use a gopro, I risk my phone when I use my iphone car mount on the bumper to record exhaust clips lolol

[Rmenjoi33]

fml hdd took a shit.....

[Si Speed 317]

Damn Joey! Thats balsy as fuck man. And Rmenjoi33 what's an hdd?

[iThinkImJoey]

Damn Joey! Thats balsy as fuck man. And Rmenjoi33 what's an hdd?

I also once put it on the fender to see how hard I was rubbing and While i was driving around, i was getting weird ass looks from people haha

[Rmenjoi33]

Damn Joey! Thats balsy as fuck man. And Rmenjoi33 what's an hdd?

hard drive for my computer.

[Xander]

fml hdd took a shit.....

SSD time!

[Rmenjoi33]

SSD time!

Have a ssd, time for a new western digital black.

[Xander]

Have a ssd, time for a new western digital black.

They are pretty cheap on Amazon

[Rmenjoi33]

They are pretty cheap on Amazon

Yeah they are cheap at microcenter too. Just gotta find time to get there.

[Rmenjoi33]

and those fugly 8k wheels....He has mounted pictures up on IG.....

[PetefromtheStreets]

and those fugly 8k wheels....He has mounted pictures up on IG.....

What?

sent from my bomb ass Galaxy s5
#doyouevenshiftbro

[Bottled Morphine]

and those fugly 8k wheels....He has mounted pictures up on IG.....

Boostedrsx?

#fastest of the hypothetical/ prospective car crew member #1

[Bottled Morphine]

If you mean him...I honestly thought they'd look better. Don't really like em...

#fastest of the hypothetical/ prospective car crew member #1

[Rmenjoi33]

If you mean him...I honestly thought they'd look better. Don't really like em...

#fastest of the hypothetical/ prospective car crew member #1

yeah I meant him, they look really bad for 8000@ lol

[Xander]

yeah I meant him, they look really bad for 8000@ lol

Yeah they do. I'm not feeling them at all

[Bottled Morphine]

yeah I meant him, they look really bad for 8000@ lol

Yeah...didn't really seem like anything special to me...not to hate but, there are some nice wheels out there he could've gotten...I was kinda like meh...to each their own though, I'm just sittin over here on my battles waiting for a working car lol.

#fastest of the hypothetical/ prospective car crew member #1

[Xander]

Yeah...didn't really seem like anything special to me...not to hate but, there are some nice wheels out there he could've gotten...I was kinda like meh...to each their own though, I'm just sittin over here on my battles waiting for a working car lol.

#fastest of the hypothetical/ prospective car crew member #1

PF01SS's here. Nothing fancy but they work for me

[Bottled Morphine]

PF01SS's here. Nothing fancy but they work for me

Yeah, I guess I mean money spent per result...I personally would've went a different direction than him. Oh well.

#fastest of the hypothetical/ prospective car crew member #1

[Xander]

Yeah, I guess I mean money spent per result...I personally would've went a different direction than him. Oh well.

#fastest of the hypothetical/ prospective car crew member #1

I would as well

[Rmenjoi33]

me too..... bought the same wheels I have and be boosted on a built motor lol......

[aLmk]

yeah I meant him, they look really bad for 8000@ lol
Pics?

[Turpid Porpoise]

http://img.tapatalk.com/d/14/06/05/e2ytetez.jpg

Sent from my SCH-I545 using Tapatalk

[Turpid Porpoise]

Meh

Sent from my SCH-I545 using Tapatalk

[PetefromtheStreets]

Gheeeyyyyy

sent from my bomb ass Galaxy s5
#doyouevenshiftbro

[aLmk]

Wow, I certainly would have spent my $8k elsewhere...

[PetefromtheStreets]

Wow, I certainly would have spent my $8k elsewhere...

Yea. Like on another car. Lol

sent from my bomb ass Galaxy s5
#doyouevenshiftbro

[Bottled Morphine]

Yea. Like on another car. Lol

sent from my bomb ass Galaxy s5
#doyouevenshiftbro

Buy mine so I can get my rotary build started.

#fastest of the hypothetical/ prospective car crew member #1

[02civic629]

and those fugly 8k wheels....He has mounted pictures up on IG.....

Are you serious he paid $8k for those wheels........ No way, they look expensive but not that much now lol lol


PF01SS's here. Nothing fancy but they work for me

RPF1 crew over here...... Deff nothing fancy, but fit the weight requirements and pockets lol lol

[aLmk]

Stock crew over here :hiding:

[Turpid Porpoise]

Are you serious he paid $8k for those wheels........ No way, they look expensive but not that much now lol lol



RPF1 crew over here...... Deff nothing fancy, but fit the weight requirements and pockets lol lol

He got the lips/barrels powdercoated and the faces are gold plated, the hardware is supposedly all real titanium hardware and then the wheels themselves. I don't know how much gold plating costs but that doesn't add up to 8k with my math.

[Rmenjoi33]

He got the lips/barrels powdercoated and the faces are gold plated, the hardware is supposedly all real titanium hardware and then the wheels themselves. I don't know how much gold plating costs but that doesn't add up to 8k with my math.

Agreed, I was just going off of what he said in the turbo chat. He could be full of it, im not sure.

[iThinkImJoey]

Mb battles poor mans crew

[Rmenjoi33]

He also said he had 80k into his car. His car is really nice, but I dont see 80k there.....

[02civic629]

Stock crew over here :hiding:

Stock wheels = lightweight :shady:


He got the lips/barrels powdercoated and the faces are gold plated, the hardware is supposedly all real titanium hardware and then the wheels themselves. I don't know how much gold plating costs but that doesn't add up to 8k with my math.

Yea because even looking at worst worst worst case scenario your looking at a 1k in tires, 2k in wheels, 1k on titianuim bolts, 1k on powdercoating, and 2k on gold plating........ thats only 7k (still missing 1k) and that's still way off cause that's saying you spent 2k in powercoating at bolts :rotfl:

I could probably see spending 4k on that setup and thats going to the rape you shops to get the work done.

[02civic629]

He also said he had 80k into his car. His car is really nice, but I dont see 80k there.....

Thats probably including shop labor though....... You take your car to a shop to get every damn nut and bolt tightened i could see those numbers being real......... If he did all the labor himself and spent 80k in parts thats complete BS :rotfl:

[02civic629]

Oh and BTW..... Happy B-day Shawn!!!!! :yay::upsidedownparty:

[Rmenjoi33]

Did Mr.Streets really break his ppg 2nd?

[Rmenjoi33]

Oh and BTW..... Happy B-day Shawn!!!!! :yay::upsidedownparty:

thanks bu

[02civic629]

Did Mr.Streets really break his ppg 2nd?

WTF...... Dem jet fighter engines be destroying built trans I see :ohnoes:

#Freakaccidentcrewcheckingin

[Rmenjoi33]

WTF...... Dem jet fighter engines be destroying built trans I see :ohnoes:

#Freakaccidentcrewcheckingin

nvm he be trolling

[Turpid Porpoise]

Thats probably including shop labor though....... You take your car to a shop to get every damn nut and bolt tightened i could see those numbers being real......... If he did all the labor himself and spent 80k in parts thats complete BS :rotfl:

He appears to do all his chassis work on his own. I don't know if he has a built motor or anything. But I my setup is fairly similar to his in terms of parts being used and I am nowhere near that.

[02civic629]

He appears to do all his chassis work on his own. I don't know if he has a built motor or anything. But I my setup is fairly similar to his in terms of parts being used and I am nowhere near that.

Ballpark numbers on your setup?? Like everything being brand new worst case........

[aLmk]

Stock wheels = lightweight :shady:
Lol, really? I never looked I to the weight much, just figured a nice wheel like the rpf1s would be considerably lighter. I've stayed stock because I'm cheap.

[Rmenjoi33]

He appears to do all his chassis work on his own. I don't know if he has a built motor or anything. But I my setup is fairly similar to his in terms of parts being used and I am nowhere near that.

he has a stock motor.

[PetefromtheStreets]

Yea I be trollin :)

sent from my bomb ass Galaxy s5
#doyouevenshiftbro

[Turpid Porpoise]

Ballpark numbers on your setup?? Like everything being brand new worst case........

Mid to low 20s.

But im sure I'm missing some things and there is still more to spend.

Sent from my SCH-I545 using Tapatalk

[Turpid Porpoise]

That also does not include the car itself.

Sent from my SCH-I545 using Tapatalk

[02civic629]

We need boostedk20.com plate frames...... I'm really tired of looking at these clubrsx ones smh

[Rmenjoi33]

We need boostedk20.com plate frames...... I'm really tired of looking at these clubrsx ones smh

meh I got ktuned ones! But I need to buy a boostedk20 sticker for sure.

[PetefromtheStreets]

We need boostedk20.com plate frames...... I'm really tired of looking at these clubrsx ones smh

In for that

sent from my bomb ass Galaxy s5
#doyouevenshiftbro

[Bottled Morphine]

Mb battles poor mans crew

I'm with you man. I'll stay out of the wheel threads lol.

#fastest of the hypothetical/ prospective car crew member #1

[Rmenjoi33]

I'm with you man. I'll stay out of the wheel threads lol.

#fastest of the hypothetical/ prospective car crew member #1

Shut up.....Has baller ass setup with not so baller wheels.....Id take the baller ass setup any day.

[Turpid Porpoise]

Yup. Fuck expensive wheels if you make gobs of power.

Sent from my SCH-I545 using Tapatalk

[Rmenjoi33]

Yup. Fuck expensive wheels if you make gobs of power.

Sent from my SCH-I545 using Tapatalk

They are moving to fast and too hard to tell they are cheap from bus lengths behind.

[PetefromtheStreets]

Yup. Fuck expensive wheels if you make gobs of power.

Sent from my SCH-I545 using Tapatalk


They are moving to fast and too hard to tell they are cheap from bus lengths behind.

Exactly. Lol

Hard to see from 39,000ft as well.

sent from my bomb ass Galaxy s5
#doyouevenshiftbro

[Rmenjoi33]

Exactly. Lol

Hard to see from 39,000ft as well.

sent from my bomb ass Galaxy s5
#doyouevenshiftbro

we are just waiting for yours to tuck up underneath.

[iThinkImJoey]

I would rock boostedk20 frames but I would look like a fool with no boosted car+slow ass base. Probably the slowest on the forums lolol


Sent from my iPhone using Tapatalk

[Bottled Morphine]

I would rock boostedk20 frames but I would look like a fool with no boosted car+slow ass base. Probably the slowest on the forums lolol


Sent from my iPhone using Tapatalk

Pfft, they talk shit, let Peter beater smash em.

#fastest of the hypothetical/ prospective car crew member #1

[Xander]

Got some painting done tonight
http://i.imgur.com/Nor6V4d.jpg

Sent from my SAMSUNG-SM-G900A using Tapatalk

[Si Speed 317]

Nice!! What's left? That just a base or is it going to stay black?

[Xander]

Nice!! What's left? That just a base or is it going to stay black?

Staying black, I'm waiting on the other half getting welded before I get it all assembled

[iThinkImJoey]

I actually have to start painting also. I picked up two front Tein ss coils for $175 because i needed some coils with camber plates. I have to sand it down to bare metal because of some slight rust and then Im going to repaint it to protect the metal. https://mail.google.com/mail/u/1/?ui=2&ik=8e546376a3&view=fimg&th=14676bef8fb21580&attid=0.1&disp=inline&safe=1&attbid=ANGjdJ9XwoacbCvcyhpeSSeawg5-0-i0cjZLewZajEo0NF4wxRH20CcfQTA8g-ki65xMKwvkUt02TCBGxsYfPEiJvt6gYpKwf4J6ieIJbxQiej5n r0ztMr7oBrtlWQQ&ats=1402151592707&rm=14676bef8fb21580&zw&sz=w1808-h808

[andyk20]

I'm slower than you

[02civic629]

I would rock boostedk20 frames but I would look like a fool with no boosted car+slow ass base. Probably the slowest on the forums lolol

Sent from my iPhone using Tapatalk

I'm not boosted but I still want a set....... I'm just tired of rocking these clubrsx ones :thumbdown:


Staying black, I'm waiting on the other half getting welded before I get it all assembled

So you like that black i see...... :yay:


I actually have to start painting also. I picked up two front Tein ss coils for $175 because i needed some coils with camber plates. I have to sand it down to bare metal because of some slight rust and then Im going to repaint it to protect the metal. https://mail.google.com/mail/u/1/?ui=2&ik=8e546376a3&view=fimg&th=14676bef8fb21580&attid=0.1&disp=inline&safe=1&attbid=ANGjdJ9XwoacbCvcyhpeSSeawg5-0-i0cjZLewZajEo0NF4wxRH20CcfQTA8g-ki65xMKwvkUt02TCBGxsYfPEiJvt6gYpKwf4J6ieIJbxQiej5n r0ztMr7oBrtlWQQ&ats=1402151592707&rm=14676bef8fb21580&zw&sz=w1808-h808

So tien ss in the front and skunk2's in the back...... Man that handling is gonna be on point :giggle:


I'm slower than you

Hmmmm.......... Joey vs Andy :shrug:

[stigrl06]

:coffee:

[Rmenjoi33]

Morning :coffee3:

[Si Speed 317]

Morning :coffee:

[Turpid Porpoise]

Morning :coffee2:

[Xander]

Morning. Trying to find a watch to buy and damn these are expensive

Sent from my SAMSUNG-SM-G900A using Tapatalk

[Rmenjoi33]

Morning. Trying to find a watch to buy and damn these are expensive

Sent from my SAMSUNG-SM-G900A using Tapatalk

I have a couple nixons. They have a nice design and are pretty reasonable in price.

[Xander]

I have a couple nixons. They have a nice design and are pretty reasonable in price.

I race sailboats and I need a couple specific timing features but the only good looking watches with them are either multiple thousands of dollars or discontinued. I'm thinking about getting a Stars & Stripes Citizen from 2003

[Rmenjoi33]

I race sailboats and I need a couple specific timing features but the only good looking watches with them are either multiple thousands of dollars or discontinued. I'm thinking about getting a Stars & Stripes Citizen from 2003

http://img2.wikia.nocookie.net/__cb20120508191126/smuff/images/a/a5/Not_sure_what_to_say.gif

[Xander]

http://img2.wikia.nocookie.net/__cb20120508191126/smuff/images/a/a5/Not_sure_what_to_say.gif

http://watchshock.com/photo/Citizen/Stars_and_Stripes/model/C660-T000304_Y/C660-T000304_Y.jpg

[PetefromtheStreets]

Morning. :redbull:

sent from my bomb ass Galaxy s5
#doyouevenshiftbro

[ryaano18]

Morning. :redbull:

sent from my bomb ass Galaxy s5
#doyouevenshiftbro

I need to stop drinking those, but they are just so damn good!

[Rmenjoi33]

I need to stop drinking those, but they are just so damn good!

long time no see....

[ryaano18]

long time no see....

Yea I know, taking a summer session right now and just haven't had time for much activities

[Si Speed 317]

You ever look into Invicta? I rock their watches in my arsenal, mainly their diving watches. I don't dive or go in the water with a watch on, I just go with the style. But they're made for it. Worth a shot.

[PetefromtheStreets]

I need to stop drinking those, but they are just so damn good!
right haha.

sent from my bomb ass Galaxy s5
#doyouevenshiftbro

[02civic629]

Afternoon crew

https://farm4.staticflickr.com/3912/14379651205_28c7318675_b.jpg (https://flic.kr/p/nUFtjM)DSC_0224 (https://flic.kr/p/nUFtjM) by DC5_02civic629 (https://www.flickr.com/people//), on Flickr

[PetefromtheStreets]

Afternoon crew

https://farm4.staticflickr.com/3912/14379651205_28c7318675_b.jpg (https://flic.kr/p/nUFtjM)DSC_0224 (https://flic.kr/p/nUFtjM) by DC5_02civic629 (https://www.flickr.com/people//), on Flickr
Nice

sent from my bomb ass Galaxy s5
#doyouevenshiftbro

[monjarassi]

Killer

[PetefromtheStreets]

So I broke something in my trans..........

sent from my bomb ass Galaxy s5
#doyouevenshiftbro

[Turpid Porpoise]

God damn facebook trolls Rmenjoi33

[Turpid Porpoise]

So I broke something in my trans..........

sent from my bomb ass Galaxy s5
#doyouevenshiftbro

Shift levers?