View Full Version : Beppe London JDM DC5 Type R K20A JRSC 7.8psi
beppe
12-26-2013, 05:44 AM
Full spec in video plus 1/4 mile run at 12.9 street tires
Nuj8HJY_Pa0
Video 0 to 80mph only get traction like that when its dry
TkowVUq1-cc
monjarassi
12-26-2013, 02:08 PM
Welcome. Will watch vids once I get home.
Si Speed 317
12-29-2013, 05:41 PM
Nice! London gets JDM, I'm jealous! Seriously, great setup and video. Nice acceleration!
beppe
01-07-2014, 08:03 AM
https://fbcdn-sphotos-g-a.akamaihd.net/hphotos-ak-frc3/1294541_538445679564332_103676885_o.jpg
https://fbcdn-sphotos-a-a.akamaihd.net/hphotos-ak-frc3/1272462_538446709564229_1557081038_o.jpg
https://fbcdn-sphotos-a-a.akamaihd.net/hphotos-ak-prn2/1264085_538446266230940_971093250_o.jpg
https://fbcdn-sphotos-g-a.akamaihd.net/hphotos-ak-prn1/1273838_538446446230922_1168015975_o.jpg
https://fbcdn-sphotos-h-a.akamaihd.net/hphotos-ak-ash3/1237328_538446626230904_1617809051_o.jpg
beppe
01-07-2014, 08:07 AM
Plans to come soon
complete air-con Remove
oil catch tank as oil buildup in the JRSC
mugen showa suspension
lighter wheels / reduce weight hopefully down to 1050kg
boost up to 9.5psi
maybe change to 3in exhaust.. but like my 2.5
I'd kill for the gruppe M intake... so jealous! Great track numbers!!
beppe
01-07-2014, 10:36 AM
some of the gruppem intake
https://fbcdn-sphotos-b-a.akamaihd.net/hphotos-ak-ash3/1263751_538446602897573_1426932915_o.jpg
https://fbcdn-sphotos-g-a.akamaihd.net/hphotos-ak-prn2/1269436_538446846230882_696353178_o.jpg
Si Speed 317
01-07-2014, 04:09 PM
Plans to come soon
complete air-con Remove
oil catch tank as oil buildup in the JRSC
mugen showa suspension
lighter wheels / reduce weight hopefully down to 1050kg
boost up to 9.5psi
maybe change to 3in exhaust.. but like my 2.5
I would definitely use a catch-can ASAP. Great on any setup, NA or FI. What are the specs of the Mugen suspension? And what wheels are you looking into? Conversion of 1050kg to lbs came out to 2314.85lbs, so I'm guessing you meant 10.5kg? What specs/dimensions are you looking for?
And you'll love the 3" exhaust, makes a big difference.
beppe
01-08-2014, 06:22 AM
I would definitely use a catch-can ASAP. Great on any setup, NA or FI. What are the specs of the Mugen suspension? And what wheels are you looking into? Conversion of 1050kg to lbs came out to 2314.85lbs, so I'm guessing you meant 10.5kg? What specs/dimensions are you looking for?
And you'll love the 3" exhaust, makes a big difference.
car weight is now alone is 1150kg want to get that down to 1050kg..
here are the shocks ive got http://www.nengun.com/mugen/sports-suspension
going 3in it will start drinking fuel even more.. as i drive it daily.. im not sure
would be good if any self tuners on here could help out on my cam angles as i tune it myself, running 45 cam then vtec at 4000rpm then 50 cam to 7000 and then dropping to 40cam to red line to build up boost
Si Speed 317
01-08-2014, 12:08 PM
car weight is now alone is 1150kg want to get that down to 1050kg..
here are the shocks ive got http://www.nengun.com/mugen/sports-suspension
going 3in it will start drinking fuel even more.. as i drive it daily.. im not sure
would be good if any self tuners on here could help out on my cam angles as i tune it myself, running 45 cam then vtec at 4000rpm then 50 cam to 7000 and then dropping to 40cam to red line to build up boost
Ah, I misunderstood initially. I thought you meant drop wheel weight and referred to the weight of the wheels, rather than the entire car. I gotchya. What else are you thinking of removing? ryaano18 monjarassi were just chatting about a new weight-reduction thread. Seems to be a popular topic over the past week! Shocks look awesome. Exhaust will drink more fuel, but makes more power! ;)
VitViper can help you with any tuning questions you have
beppe
01-10-2014, 08:17 AM
great thanks ive sent vitviper a pm...
beppe
01-13-2014, 12:14 PM
Small Exhaust Flame.. need a faster camera car
http://www.youtube.com/watch?v=s4SUBRF_8EM
Si Speed 317
01-23-2014, 09:15 AM
I missed it! And yea, you sure do! But, you can always have him one lane to the right and start booking before you do! It helps
beppe
01-23-2014, 12:19 PM
got the catch can installed.. now thinking of changing the rc650 injectors i have.. to better spray patterns ones.. recommend any that ship to UK
http://i43.tinypic.com/aw5m3k.jpg
Injector Dynamics are great injectors. I would look into them. Not sure where or where they don't ship.
Si Speed 317
01-23-2014, 04:25 PM
Injector Dynamics are great injectors. I would look into them. Not sure where or where they don't ship.
Yes, or SFI injectors. They're the same injector with a better price point. Same injectors used on this year's past SFWD record setting civic from Team XIR.
beppe
01-24-2014, 09:11 AM
Yes, or FIC injectors. They're the same injector with a better price point. Same injectors used on this year's past SFWD record setting civic from Team XIR.
thanks buddy you know your stuff more than they do here in the UK London..
Si Speed 317
01-24-2014, 11:26 AM
thanks buddy you know your stuff more than they do here in the UK London..
Happy to help. I meant SFI instead of ID. Let BoostedK20 know when you need any fuel stuff, I bet he would love to help you out!
beppe
01-24-2014, 11:32 AM
Happy to help. I meant SFI instead of ID. Let BoostedK20 know when you need any fuel stuff, I bet he would love to help you out!
Smart Fire Injectors? there quite cheap.. i was gonna stay away from them as thought they wasn't gonna be any good?
Si Speed 317
01-24-2014, 11:36 AM
Smart Fire Injectors? there quite cheap.. i was gonna stay away from them as thought they wasn't gonna be any good?
Southbay Fuel Injectors. They're great, they're the same injector as ID but at a much better price point. I strongly recommend them
beppe
01-24-2014, 12:02 PM
Southbay Fuel Injectors. They're great, they're the same injector as ID but at a much better price point. I strongly recommend them
thinking about ordering http://www.southbayfuelinjectors.com/honda-650cc-b-d-h-k/ or do you think i should go bigger running around 70% duty cycle ?
or http://www.southbayfuelinjectors.com/honda-850cc-b-d-h-k/
will they fit on standard fuel rail?
Si Speed 317
01-24-2014, 09:00 PM
thinking about ordering http://www.southbayfuelinjectors.com/honda-650cc-b-d-h-k/ or do you think i should go bigger running around 70% duty cycle ?
or http://www.southbayfuelinjectors.com/honda-850cc-b-d-h-k/
will they fit on standard fuel rail?
Honestly, go with the 1000cc. You're returnless, and you don't want to have the issue of getting new injectors again. I made over 400whp turbocharged with SFI 1000cc injectors and a walbro 255, without a return. Now I have a bigger fuel pump and a full return setup with a -6 feed. The 1000cc will also allow you to run e85, which you'll love if you have it available by you.
beppe
02-04-2014, 12:21 PM
ordered injectors from south bay injectors.. went for 850cc ones
catch tank is working well, its been collection oil.. but causing my idling very high when cold? perfect when engine hot
beppe
03-20-2014, 09:01 AM
All disappointing Runs
?v=FEKi_orkJGA
?v=dROtpGjbFLA
?v=BxzG-s1iXIA
makes me miss the sound of my supercharger so much. thanks for posting up the videos
beppe
04-09-2014, 06:00 AM
above santapod day was dissapointing but found out why
mercracing bracket bolt snapped off (see pic) broke in the auto tensioner.. so belt not 100% aligned, ordered another auto tensioner instead of removing bolt.. hopefully straight forward taking it off..
put it down to belt was being too tight.
http://i61.tinypic.com/65qu01.jpg
http://i61.tinypic.com/f2811v.jpg
while its off the road im gonna remove all aircon as we done really need it here.. but gonna change to the larger EP3 crank pulley hopefully give me 9psi of boost
beppe
04-16-2014, 07:33 AM
?v=RQdKR0Vpp7I
monjarassi
04-16-2014, 09:56 AM
Sick!!!!!
i've seen several people break that bolt on the merc racing bracket
beppe
04-17-2014, 09:41 AM
Just ordered a Mercracing Aftercooler and 2.8in pulley from Jose
should be around 11psi on the DC5 R crank pulley
how much psi and stock sensor see?
how much power gain you guys think it will give? only on 7psi now and dynoed at around 280whp
Turpid Porpoise
04-17-2014, 09:50 AM
Just ordered a Mercracing Aftercooler and 2.8in pulley from Jose
should be around 11psi on the DC5 R crank pulley
how much psi and stock sensor see?
how much power gain you guys think it will give? only on 7psi now and dynoed at around 280whp
At 11 psi with his aftercooler I could see you around 320-330 whp with a good tune. The stock map sensor can see 14 psi I believe. I might be wrong.
The stock sensor on the 8th gens maxed at 10-11 psi. A competent tuner should be able to make the stock sensor work even if it goes above 11 psi a tad since it's a supercharger and all linear.
beppe
04-17-2014, 10:06 AM
thanks Guys..
beppe
04-24-2014, 11:55 AM
http://i62.tinypic.com/2litwn6.jpg
http://i57.tinypic.com/qzottw.jpg
beppe
05-29-2014, 07:23 AM
...
I don't think that's all that inaccurate. The stage 2 supercharged 8th gens at dyno days I've been to usually make around 290hwp, and that's with a bit more than 7.5 psi, they're closer to 9-10, so I think that's pretty spot on.
beppe
05-29-2014, 11:29 AM
...
bluEP3_SC
05-30-2014, 10:23 AM
Stock map sensor isnt going to work above 10psi- not accurately at least. Id upgrade to a 3-4 bar map sensor along with a better IAT sensor relocated to the manifold for when you get the aftercooler- both will provide more precise readings for a stronger tune. I would say 315-320 @ 11psi on a aftercooled jdm k20a is about right.
Sent from my iPhone using Tapatalk
Si Speed 317
06-09-2014, 12:31 PM
I guess the posts were removed by beppe, but I agree 315-320 @11psi is a good range for an aftercoooled k20a. Assuming on 91/93 pump and not running meth.
beppe
07-07-2014, 09:57 AM
Update from japshow didnt run my car as took aircon out and now getting belt slip so gonna put aircon back on as jrsc doesnt get much belt grip as belt route without aircon.. shame really as wanted to better my 12.8 run..
Still waiting for after cooler & smaller pulley from mercracing.. been 3 months.. come on jose.. lol
https://scontent-a-lhr.xx.fbcdn.net/hphotos-xpa1/t31.0-8/10380467_681350838607148_5435102945402874612_o.jpg
https://scontent-a-lhr.xx.fbcdn.net/hphotos-xfa1/t31.0-8/10530546_681350825273816_4819111735224601762_o.jpg
New Radiator..
http://i58.tinypic.com/2jag8qe.jpg
Avid engine mount broke
https://scontent-a-lhr.xx.fbcdn.net/hphotos-xpa1/t31.0-8/10504836_259827097544570_932751959231930245_o.jpg
bluEP3_SC
07-07-2014, 10:08 AM
Love the car man- i wouldnt add the AC back unless you really want it. If your getting belt slip then your belt is either worn out or you need a smaller belt. That ac compressor takes up a lot of room so my guess would be the latter. Im interested to see what your k20a can do with the aftercooler. I'll be in the same boat soon...
Sent from my iPhone using Tapatalk
beppe
07-07-2014, 10:13 AM
Love the car man- i wouldnt add the AC back unless you really want it. If your getting belt slip then your belt is either worn out or you need a smaller belt. That ac compressor takes up a lot of room so my guess would be the latter. Im interested to see what your k20a can do with the aftercooler. I'll be in the same boat soon...
Sent from my iPhone using Tapatalk
without aircon belt route is minimal on the charger.. thats a new tight gatorback belt and its sliping only giving me 6psi boost from 7.8psi
http://i61.tinypic.com/b7dvdy.jpg
bluEP3_SC
07-07-2014, 10:17 AM
without aircon belt route is minimal on the charger.. thats a new tight gatorback belt and its sliping only giving me 6psi boost from 7.8psi
http://i61.tinypic.com/b7dvdy.jpg
Did your belt get routed differently when it had the AC installed? That looks exactly like mine- except with your PS and JRSC tensioner you have like 20% coverage on the boost pulley- explains why it slips. The mercracing tensioner should fix that problem- i think his is designed for the rsx PS to offer max belt wrap
Sent from my iPhone using Tapatalk
beppe
07-07-2014, 10:22 AM
Did your belt get routed differently when it had the AC installed? That looks exactly like mine- except with your PS and JRSC tensioner you have like 20% coverage on the boost pulley- explains why it slips. The mercracing tensioner should fix that problem- i think his is designed for the rsx PS to offer max belt wrap
Sent from my iPhone using Tapatalk
im using the mercracing bracket that uses the oem auto tensioner .. that ps pump on top causes the problem.. easy way is put the aircon pump back.. only weighted around 7kg.. i can live with that don't have any other choice
with aircon on belt goes down around waterpump and back up around alternator and down to aircon.. giving more grip on jrsc
bluEP3_SC
07-07-2014, 10:30 AM
im using the mercracing bracket that uses the oem auto tensioner .. that ps pump on top causes the problem.. easy way is put the aircon pump back.. only weighted around 7kg.. i can live with that don't have any other choice
with aircon on belt goes down around waterpump and back up around alternator and down to aircon.. giving more grip on jrsc
Ahh i see. Makes sense. Mercracing also makes a replacement tensioner setup if your interested.
Sent from my iPhone using Tapatalk
beppe
07-07-2014, 10:32 AM
picture with aircon
http://i57.tinypic.com/rrjtap.jpg
bluEP3_SC
07-07-2014, 10:37 AM
picture with aircon
http://i57.tinypic.com/rrjtap.jpg
Yea i can see it now. I havnt had my AC compressor for so long now i dont even remember how the belt originally ran
Sent from my iPhone using Tapatalk
Update from japshow didnt run my car as took aircon out and now getting belt slip so gonna put aircon back on as jrsc doesnt get much belt grip as belt route without aircon.. shame really as wanted to better my 12.8 run..
Still waiting for after cooler & smaller pulley from mercracing.. been 3 months.. come on jose.. lol
https://scontent-a-lhr.xx.fbcdn.net/hphotos-xpa1/t31.0-8/10380467_681350838607148_5435102945402874612_o.jpg
https://scontent-a-lhr.xx.fbcdn.net/hphotos-xfa1/t31.0-8/10530546_681350825273816_4819111735224601762_o.jpg
New Radiator..
http://i58.tinypic.com/2jag8qe.jpg
Avid engine mount broke
https://scontent-a-lhr.xx.fbcdn.net/hphotos-xpa1/t31.0-8/10504836_259827097544570_932751959231930245_o.jpg
That's crazy the engine mount broke!
beppe
07-07-2014, 11:59 AM
That's crazy the engine mount broke!
Shouldn't have broken like that.. all other mounts are perfect and upgraded
Emailed Avid thought there mounts came with lifetime warranty.. he asked where i was in usa.. i said im in london UK and they never replied after that... maybe if i was in the US they would have sent me another mount..
This is why removing P/S is so beneficial... belt routing is better
beppe
07-11-2014, 06:31 AM
New engine mount.. took all avid mounts off
http://i58.tinypic.com/icjltj.jpg
http://i61.tinypic.com/358yngp.jpg
that's a pretty awesome looking mount.
beppe
01-11-2016, 11:02 AM
Test post
Powered by vBulletin® Version 4.2.5 Copyright © 2024 vBulletin Solutions Inc. All rights reserved.